Question about 1989 Chrysler Fifth Avenue

1 Answer

1989 Chrysler 5th Avenue.... transmission repaired about 5 months ago. It seems as though the linkage is out of place. All of a sudden, when I went to start my car, the gears would not go into place. This is not my mechanic's responsibility. However, it would have cost me about $200.00 to tow car home from a long distance. My boyfriend was able to shove the car into gear manually. But, the car's gears do not want to grab. Now, after 2 hours, I went to crank the car and it started like nothing ever happened. Previously, the car did not want to make contact with the starter, electrical systems, etc. What can I do?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 343 Answers

Sounds like you have several different things going on.. First get a shop to check your transmission band adjustment, fluid condition and level. Over or under filled trans fluid or contamination could be responsible for part of this. Check connections on starter motor and if non engaging gear becomes a problem again have it bench tested (solenoid/starter)

Posted on Oct 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 5th avenue, idling problem


Stalls While Braked or Braking and While Turning.

www.2carpros.com/.../1989-chrysler-5th-avenue-stalls-while-braked-bra...
Jan 9, 2012 - 1989 Chrysler 5th Avenue • 89,000 miles ... Check the idle air control motor, EGR and PCV valves-also check the ... The 318s used in the Fifth Ave were built to really tight tolerances compared to those used in trucks and vans. ... and using a cardboard gauge to see if the floats fall down to the proper setting.

Sep 08, 2015 | Cars & Trucks

1 Answer

1989 chrysler 5th avenue - blows taillight fuse when headlights are turned on


sounds like you have a bad ground some were check the body to frame ground

Feb 20, 2012 | 1989 Chrysler Fifth Avenue

1 Answer

We have a 1989 Chrysler 5th Avenue, it is not starting. We have checked all the wiring and replaced the battery, the Timing chain, retimed the engine, regabbed the spark plugs, Nothing seems to want to...


your throwing all these parts at vehicle need to break it down --does vehicle turn over ---doest it turn over and no start --is it getting spark --is it getting fuel --with no spark need to test componants or adjust --with no fuel need to test fuel system fuel pump-filter etc

Jul 14, 2017 | 1989 Chrysler Fifth Avenue

2 Answers

I lost the keys to my 1986 chrysler 5th ave. If I


no the car is too old for chrysler to have records for your key code you will have to buy a new lock set unless you can get the old locks out and have a locksmith cut keys

Sep 27, 2009 | 1986 Chrysler Fifth Avenue

1 Answer

Passenger wiper arm on 1986 chrysler 5th avenue has come loose


shut off the wipers. Place the pass wiper in the rest position. Tighten the clutch nut at the bottom end of the wiper arm

Jul 28, 2009 | 1986 Chrysler Fifth Avenue

3 Answers

My 98 cavalier manual stick shift will not go to reverse gear


sounds like the shifter linkage has worn and not working properly need to lift in air and inspect the linkage

Jul 08, 2009 | 1996 Chevrolet Cavalier

1 Answer

1994 buick park avenue, idling up and will not idle down


If it's not sticking throttle linkage, and i assume it isn't because you have an engine light on, it's probably a faulty idle control sensor. You can get one at any parts store, and they aren't hard to remove and replace. The parts guy can show you exactly where it is on his screen.

May 01, 2009 | 1994 Buick Park Avenue

3 Answers

1989 Chrysler 5th ave, shuts off when idling, hard to start,


remove the gas tank sending unit and replace it with a new one or new filter end and your problem wiill be solved

Apr 16, 2009 | 1989 Chrysler Fifth Avenue

Not finding what you are looking for?
Cars & Trucks Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...