Question about 1997 Ford F150 Regular Cab

1 Answer

I have a 1998 F-150... recently i was cleaning out my truck... i removed the seats & the plastic panels.. Now i noticed that the airbag light stays on... How do i fix it?

Posted by on

Ad

1 Answer

Go to parts store, and see if their code reader will clear,if not then a scan tool will be needed

Posted on Oct 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove passenger seat in Chevy 2015 equinox


Power down the airbag system. Disconnect the airbag connector. Remove the plastic trim panels at the seat tracks. Remove the four bolts holding the seat to the floor. Lift seat out.

Aug 25, 2017 | Seat Cars & Trucks

1 Answer

I disconnected the wires under seat to remove seat when replacing air blower , now my airbag light is on , how do I reset it


It should reset automatically if the plugs were reconnected properly
When I took the seats out on mine and put them back in the airbag fault light came on because the steering wheel airbag went faulty
So one of the other airbags or seatbelt tensioners is showing a fault only way to find out which is to get the fault codes read to find what it is that's unhappy




So it could be one of the other bags has had ahissy fit so get the fault codes read to find which one is faulty or poorly connected

Apr 30, 2015 | 2009 Mitsubishi Eclipse Spyder GS

1 Answer

How to remove front passenger side seat


Always disable the air bag system first, to prevent accidental deployment of the air bags. The main airbag module is beneath carpeting under passengers seat. To remove passengers seat, At the rear of the seat remove the two bolts securing the tracks to the floor, tilt the seat up and towards the instrument panel, unplug any electrical connectors beneath and remove the seat. the front plastic track covers can remain in place while the seat track tabs are lifted out of the slots on the floor. ( caution disable airbag before removing the seat ) Good-Day! Hope this helps you!

Sep 12, 2014 | 2000 Chevrolet Malibu

2 Answers

I have a 2003 pt cruiser the air bag light stays on , code for open driver's door retractor, clean connector and check wires, light went out till next start up the light came back on , removed con


The seat belt switch cannot be adjusted or repaired and, if ineffective or damaged, the entire front seat belt and retractor (drivers side) must be replaced.
For more details on this issue,click the link below:-----
http://technoanswers.blogspot.in/2012/06/pt-cruiser-seat-belt-and-retractor.html

-------
This will help.
Thanks.

Jun 25, 2012 | Cars & Trucks

1 Answer

How to change the third break light bulb in a 2007 hyundai sonata ?


From 2006 to 2010, the Sonata's 3rd brake lamp requires the rear package deck be removed to access that bulb.
1. Remove the rear passenger seat bottom (remove two12mm bolts between the seat back and the seat bottom - tilt the seat back forward to locate these bolts).
a. Press the two bottom front edge tabs to release the front of the seat bottom from the floor.
b. Remove seat bottom & set aside w/two 12mm bolts
c. Tilt both seat backs downward
2. Remove the left & right hand shoulder cushions (12 mm bolt at the bottom of each cushion)
a. Remove seat belt from shoulder cushion guide at the top of the cushion
b. Lift up and forward on shoulder cushions to remove them (if equipped with side airbags, disconnect wire harness connector).
c. Set shoulder cushions aside w/two 12mm bolts
3. Using a small flathead screwdriver, pop out the 'SRS' button cover from the C pillar panels on the left & right hand side to access either the phillips head screws, 10mm bolts, or #30 Torque Screws
a. Remove screws and set aside
b. Using a standard flathead screwdriver, pop out the C pillar panels on both sides (clips hold these panels in place)
c. Set these panels aside after removal w/screws/bolts
4. Trunk Access-way panels are held in place by phillips head screws (two at the bottom (left and right hand sides) and 4 to 5 at the top .
a. Remove left and right hand panels and set aside w/screws.
5. Rear package deck held in place with two plastic clips (white, yellow or pink)
a. lie on your back inside the trunk (trunk lid open to allow for more light). Looking through access hole find 3rd brake light wire harness connector & disconnect.
b. locate package deck clips, one on the left and another on the right on the underside of the pckage deck
c. Squeeze clips to push them out - package deck will come loose
d. Remove package deck & remove 3rd brake lamp bulb socket (turn counter clockwise to remove). Replace bulb & reassemble in reverse order.

Sep 05, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

Airbag light - I cleaned the carpet in my 2001 caravan (by removing it to pressure wash it). To do this I took the seats (w/airbags)out disconnecting the terminals under the seats. I didn't disconnect the...


By turning the key on with the seats removed you have put a code into the airbag module.
A good scan tool CAN RESET the airbag module in your vehicle back to factory settings..

May 14, 2017 | 2001 Dodge Caravan

1 Answer

2003 TT Air Bag & Seat Belt warning lights not eluminating


It is fairly complicated to remove the instrument panel to replace the light bulb. It requires you to remove the steering wheel and airbag module and several other components.

The sound you hear may be the coolant pump for the turbo.

Sep 10, 2009 | 2000 Audi TT

3 Answers

2001 PT Cruiser Limited Ed. Airbag light keeps coming on and off and chimes every time it does. Is there any way to turn it off for now, its driving me bonkers?


There may be some reasons of coming the airbag light on your PT Cruiser. Some connectors could be loose under seats or sensor of steering wheel could fail. However it is really rear. Your problem is probably caused by common problem in PT Cruisers - by broken wire on driver's seat.
Before you start doing anything disconnect a car battery. After 15 minutes remove a plastic panel from the seat (the one you can see when you open your door). Than you will see a wire in plastic cover. It connects an airbag in your seat and yellow connector under the seat. The wire breaks near to the second plastic T-shaped part (looking from the top of the seat backrest). It is located where is a pooling line and rising seat connector wire - somewhere in the center of lenght of the seat. Put the seat backrest to the vertical position, push up the black plastic cube of the line to remove it and have some room to repair the wire, cut a cloth tape. You should have ***** white and red wires. Inspect the wire about 1,5 inch from the center of the place where was the center of the T-shaped plastic keeper. The wire outside will be looking as new, but coper lines inside used to be broken. Strech slightly one by one of the 2 wires. When you find the break just cut the plastic cover in that place, remove 0,25 inch of the cover from each of cut end of wire and twist the ends or put extra 2 inch insert of the same wire. Wrap the coper wires in insulating tape neatly and tape all of the wires together with the T-shaped plastic keeper. Put on place the line udjusting a backrest of the seat, the keeper and plastic cover of the seat. Connect a battery and check it.
If you are not sure where is the place whre the wire could be broken, it is exactly 30 centimetres from the connector of the airbag. TomasS

Jun 14, 2009 | 2001 Chrysler PT Cruiser

1 Answer

Seat Cover in Pontiac Montana


Not sure about the storage bins BUT,if you have side airbags in the seats make sure the seat covers are "side airbag" compatible.

Jun 01, 2017 | 2005 Pontiac Montana

2 Answers

I have a 2002 Mazda Millenia and the airbag light on the dash is blinking. Can you tell me possibly what the problem might be?


I had both issues, it was a wiring harness for the Airbag and the motor for the steering column.

Nov 20, 2008 | 1997 Mazda Millenia

Not finding what you are looking for?
1997 Ford F150 Regular Cab Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...