Question about 2004 Dodge Ram 2500

1 Answer

Front end shakes but shock is new and all the tierod ends are new

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 7,789 Answers

Look at your tires for uneven wear. Check front wheel balance and ball joints. You may be able to get a free front end inspection at some alignment shops.

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front end shakes at 40mph


usually a badly balanced tire... could also be trashed shocks or a very loose tierod

Apr 27, 2014 | 2006 Pontiac G6

1 Answer

I have a 1996 chevy suburban. Every time I turn left it makes an squeaking/rubbing noise. What could it be?


Its hard to say for sure but if the brakes work OK in a stright line brakeing situation with on steering wheel shake side to side . Its most likely a ball joint problem . Although it could be a wheel bearing or a blown shock or a tierod end . The best thing you can do is to jack the front of the vehicle up be safe about it put it on stands and block the rear wheels . And see if the wheel moves up and down or side to side i don't mean turn it . If you can feel movenent no matter how minor there is a problem . Then you need to viseuly inspect to parts in the front end compare it to the other side look for riped boots and oil leaking from the shocks if all this looks OK check the wheel bearing it maybe loose . But look at the boots on the upper and lower ball joints and remember any movement at all it a problem it should be tight all parts in the entire front end

Apr 13, 2011 | 1996 Chevrolet Suburban

1 Answer

2001 dodge ram is shaking or hops when hitting a bump or turning. front tierod leaking, thought it was the shocks???what could it be?


Sound like more loose front end parts. I would get the truck to an alignment shop and have them look the front end over and give you an estimate for repairs.

Mar 13, 2011 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

1986 F150 2wd, front suspension hops uncontrolably when one or both wheels hit a dip or manhole cover in road. I have to almost stop to get it to quit jumping up and down. Too many new parts have been...


I had a chev truck do that once . It was the tires were out of balance. A friend of mine had to put stablizer shock on the steering tie rod to stop his. It looks like a long shock that mounts to the frame and the tie rod shaft. Good Luck

Feb 27, 2011 | Ford F-150 Cars & Trucks

1 Answer

My front suspenssion çlanks and when I am driving at about 55 mph the wheel shakes from one side to the other, the vehicle has oversized wheels and some mechanic said that was the problem and...


the clanking tells me that there is something loose in the front end.. tierod end .. ideler arm ... shock absorber or even some worn bushings. They shoud have found this during the alinement. The conndition of the tires can also casue the shakewhile diriving at high speeds.if it is the wheels that are causing it ... personal safety and the regard for others should be the deciding factor here and put something else on and sell the others on ebay or something.

Feb 16, 2010 | 2003 Lincoln Navigator

2 Answers

Wheel shaking?


There are many things that can cause front end vibrations, I will give you a list and hopefully the information provided will allow you to narrow it down. Usaully front end shake is caused by a tire that either has a shifted belt in the tire or the tire weights could have falled off and the tire and wheel must be rebalanced, another reason for shake is if the shake occurs when applying the brakes it is a warped rotor and the brakes must be replace in the front end along with new rotor installed, the last thing that it could be is a loose or worn out front end part perhaps a tierod end. If i was you I would try rotating the tires from the front to the back and see if the shaking goes away if it does it is most likely a bad tire (shifted belt) or the tire needs to be rebalanced at a auto garage. after checking that first then jack up the front and grab the wheel and move it back and forth up the down to check for play or loosness, as I said if the shaking occurs while applying the brakes replace the brakes and rotors.

Oct 13, 2009 | 1990 Ford Thunderbird

1 Answer

95 f-150 3 inch lift hit bumps at 35 mph and front shakes bad


Check your wheelbearings for play and your tierod ends for play,I'm sure one of these two are at fault.

Sep 25, 2009 | 1995 Ford F150 Styleside Regular Cab

1 Answer

Front end on my volvo v70 shakes


could be wheels need balancing or tierod ends are worn.

Aug 04, 2009 | 1998 Volvo V70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...