What is the bleeding sequence on my 2006 Malibu?

Find a core plug that provides access. Drain cooling system. Remove core plug. Install heater. Refill cooling system and bleed air out of it

the best way to bleed a hydraulic braking system is to use a pressure bleeder to pressurise from the master cylinder and start at the caliper/cylinder furthest away from the master cylinder ie the one further away with the longest pipework and go around the car in order of pipework length. you can use the old fashioned way by getting someone to press the brake pedal and pump it out whilst you use a bleed tube and bottle but you may run risk of damaging the master cyl if its worn. so you can work out the sequence by looking at the hydraulic layout.hope this helps

Here's how to abs bleeding?

Start at the caliper furthest from the master cyclender, should be right rear then move to left rear followed by right front and lastly left front! I have done many different cars over the years and this procedure allway works perfectly:)

look up under the dash at the arm for the brake pedal, you will see the brake light switch, make sure it is pushed in enough that the arm is pushing the button in on the switch, a loose switch will cause the lights to come on

the best way is to gravity bleed it...remove or loosen the master cyl cap and loosen the bleeder at one wheel at a time and as gravity pulls the fluid out the air will rise up and out much like an air bubble in water

yes, as long as the master cylinder has not been allowed to run dry.

Bleed the master cylinder first,then the right front,and the left front.Now only pump brake pedal one time all the way to the floor,

Yes air gets into the hole system. You need to bleed all 4 wheels.

start by bleeding the fluid from the drivers front wheel first,till the fluid comes out. then the passenger front wheel then the rear right wheel then the rear left wheel, repeat again make sure to keep the aster cylinder full of fluid so it doesnt run dry. bleed till u get a steady stream of fluid from each of the wheels when bleeding them in the sequence ive stated.