Question about 2000 Dodge Durango

1 Answer

Replaced powerstringing pump it sill makes nosie and do work right

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 297 Answers

Take a piece of cardboard tubing, and lean in good and close (But don't get your hair or head sucked into the fan or belt). Point the tubing directly at the belt/pully, and make sure it is not at the body of the pump. Listen good and close. Can you hear the noise from there? Move it over, and listen to the front body of the pump. Can you hear the noise better from here? Get some belt dressing, and put it on the belt. If it goes away, your pulley/belt may be a little elderly, time to replace the belt. If it doesn't ... be careful, it may be about time to replace the P/S pump main bearing.

Posted on Oct 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where do I add washer fluid for rear window wiper on a 2000 blazer


Open the hatch and look for the fill cap along the sides .

Oct 23, 2015 | Cars & Trucks

1 Answer

2006 Tahoe. Where is the auxiliary blower motor located?


It is located behind the right rear quarter panel , In the back right of the interior !
Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side in Interior Trim.
Removal Procedure
  1. Remove the rear seat. Refer to Rear Number 2 Seat Replacement or Rear Number 2 50-50 Seat Replacement in Seats.
  2. Remove the Third Pillar trim panel. Refer to Third Pillar Trim Replacement .
  3. Remove the garnish molding. Refer to Body Rear Corner Garnish Molding Replacement .
  4. Remove the door sill plate. Refer to Liftgate Door Sill Plate Replacement .
  5. Remove the quarter panel trim screws.
A lot involved in this but not to difficult !
  1. Remove the rear door sill trim plate. Refer to Front Side Door Sill Plate Replacement or to Rear Side Door Sill Plate Replacement .
  2. Remove the lower rear seat belt cover and bolt.
  3. Remove the trim panel from the vehicle.
Remove the sill plate. Firmly pull the sill plate up and out from the retainers.
Remove the sill plate from the vehicle. Start from the front of the door sill. Use a flat-bladed tool in order to pry the door sill plate.
Rear Side Door Sill Trim Plate Replacement
Use a flat-bladed tool in order to pry the door sill plate. Remove the sill plate from the vehicle.
Body Rear Corner Garnish Molding Replacement
Remove the rear upper garnish molding. Refer to Rear Upper Garnish Molding Replacement .
Pull down on the upper corners of the garnish molding in order to disengage the retaining clips. Pull in order to disengage the remaining retaining clips. Remove the rear corner garnish molding from the vehicle. Inspect the rear corner garnish molding for broken or missing retaining clips. Replace the retaining clips as needed.
Good Luck ! Fun job !!!!!

Jun 07, 2015 | 2006 Chevrolet Tahoe

1 Answer

Power steering pump replacement


Your going to have noises and fluid drop when you first do this project there is air in the system have you turned the steering wheel several times left to right while running to bleed the air and re check fluid level?

Jan 07, 2014 | 2004 Acura TL

1 Answer

Screaming nosie coming from mini cooper automatic


Possible power steering pump failure

Jan 25, 2013 | Cars & Trucks

1 Answer

2002 ford Taurus power streeing


You shouldn't need to replace 2 pumps,or even one. It shouldn't whine,where you hear it, driving.
I would change the steering rack,flush the cooler and pump. Still got a whine ,your getting bad rebuilt pumps

May 20, 2010 | 2002 Ford Taurus

1 Answer

2000 hyundai elantra replaces all the belt ,but power steering changer belt 3 times and still makes nosie


dear friend-if your model came with a multy v belt(pk)then the power steering pump is equipt with a alluminuim pulley,should this be then the belt inbeds into the pulley to deep,replace or file down.

Jun 30, 2009 | 2000 Hyundai Elantra

1 Answer

How to determine weather it is the power steering pump, or hose?


power steering will make a buzz nosie and it will get worse when the steering wheel is turned. It usually is just low n power steering fluid. Check that first. The other is a belt squeal noise, worse when turning, which usually just requires tightening unless it's self tensioning syste. Or replace the belt. Need a better description of the nosie and results of fluid level check. Report back on findings.
Please rate as fixya if this resolves your problem.

Mar 05, 2009 | 1999 Pontiac Grand Am GT

1 Answer

I have 91 ford f350 making nosies need help plz help me out


it sounds like the filter might not be the right one....
or the pump isnt priming.....

like "diesel mudder" said previously : was yr tranny in bad shape b4 you changed the fluid and screen?

Feb 25, 2009 | 1991 Ford F350

Not finding what you are looking for?
2000 Dodge Durango Logo

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...