Question about 2000 Lincoln Continental
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
take out the top 4 bolts above the altenator, between those metal tubes on the metal bracket. then u have 1 bolt holding the wires to the altenator on that bracket aswell remove that. then remove the coolant reserve bottle and stick a breaker bar or rend of a ratchet in the tenchenor pulley square slot pull it back twords the head lights the belt will loosten then remove it from the altenator. then u will see 2 more bolts on the bottom side of the altenator by the pulleys and belt. Remove them 2 bolts all the way and the altenator will drop out of the bottom of them metal tubes and slide through the sides of them and its out... its very ez and does not need the tubes removed its a lot ezer than it looks.. sorry about my spelling im an infantryman not a teacher.
Posted on Feb 17, 2009
remove the coolent over flow tank, pull the power steering fluid resevor out of the way remove belt, remove top alternator bracket, remove 2 bolts under alternator, lift and tilt the bottom out through the opening. hope I was helpfull!
Posted on Apr 15, 2009
SOURCE: gear shift stuck on park
hi do you hear a click sound from the gear lever area when you press the brake pedal if not first of all check under the dashboard around the brake pedal se if the brake switch has fallen out if all looks ok then if you look at the top of your gear selecter you should see a small plastic screw remove it with a flat screw driver put you car key in the hole and push down on the key you should be able to then remove your gear selecta from the park position hope this helps
Posted on Mar 11, 2009
no reset button. Take vehicle to your local aotu parts store such as autozone ans ask them if they can run a code scanner test. This can list any and all trouble codes associated witht he light being on as well as reseting the light.
Posted on Oct 14, 2009
pop the trunk and right behind where the lights are pull the carpet
down and their will be of the following depending on the trim.
You will either see the light sockets themselves that you can twist and pull to change the bulb, or you will see the plastic nuts/screws that you can remove to remove the entire assembly in order to access the bulbs.
If it's your 3rd brake light, the screws to access the housing are located in the upper part of the trunk
Posted on Oct 26, 2009
Tips for a great answer:
Jun 22, 2015 | 2001 Lincoln Continental
Oct 01, 2014 | 2001 Lincoln Continental
Jul 22, 2014 | 2001 Lincoln Continental
Dec 05, 2012 | 2001 Lincoln Continental
Nov 30, 2012 | 2001 Lincoln Continental
Sep 15, 2011 | 2001 Lincoln Continental
Oct 29, 2010 | 2001 Lincoln Continental
Oct 15, 2010 | 2002 Lincoln Continental
Oct 14, 2009 | 2005 Ford Lincoln Continental
Oct 08, 2009 | 1991 Lincoln Continental
610 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: