Question about 1991 Honda Accord

2 Answers

Need to know how the timing marks are set on a 91 honda accord

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 5,763 Answers

I assume your talking about the timing belt marks for the crank and cam,heres a diagram to help you.need to know how the timing marks are set on a 91 - 6d7e9bc.gifb7e773c.gif

Posted on Oct 01, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I can t find the spot on the motor to set it to

Posted on Jul 31, 2012

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mtoal_1999
  • 25 Answers

SOURCE: 1992 honda accord

there is timing marks on the camshaft where you line it up it can be difficult

Posted on Aug 24, 2008

  • 1757 Answers

SOURCE: timing marks

Click on the following Link. It has the Timing Belt and Markings - Diagrams you will need.

http://www.2carpros.com/car_repair_information/year/1994/make/honda/model/accord/1994_honda_accord_timing_belt_diagram_marks.htm

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Posted on Mar 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is a 92 honda accord engine compatible with a 91 honda accord car


Check with your local Auto Recycling Center or otherwise known as Auto Salvage Yard.

Aug 27, 2014 | 1992 Honda Accord

1 Answer

1991 honda accord lx backfires and cuts off after timming belt broke and repair what could be the problem with this car now


you need back to the timing belt and re_check the marks for the timing belt this are on the camnshaft and cranck shaft put on the EXACT position .I think is all what you need if is not explain with more details tnk.

Aug 28, 2012 | 1990 Honda Accord

1 Answer

Set timing on a 1992 honda prelude, 2.3 engine, I REPLACED THE DISTRIBUTER AND NOW ITS COMPLETELY OUT OF TIME, detailed instructions please


  1. Locate the service check connector and, if applicable, remove the cap. On 1988-91 Preludes, the cap is yellow and the connector is located next to the vacuum control box in the engine compartment. On 1992-95 Preludes, the service connector is located under the middle of the dash. On 1990-93 Accords, the connector is blue and is located behind the right front kick panel, under the dashboard. On 1994-95 Accords, the service connector is located behind the glove box. Use a jumper wire to connect the two terminals of the service connector.
  1. Following the manufacturers instructions, connect a timing light to the engine. The positive and negative leads connect to their corresponding battery terminals and the spark plug lead to No. 1 spark plug wire.
  2. Make sure that all wires are clear of the cooling fan and hot exhaust manifolds.
  3. Set the parking brake and block the front wheels. Start the engine. Check that the idle speed is set to specifications.
  4. Point the timing light at the timing marks. On all models except 1994-95 Accords, the marks are on the flywheel. On the 1994-95 Accords, the timing marks are on the crankshaft pulley. When the engine is idling, the red mark must align with the pointer. Some timing marks are indicated by 3 lines; the center one must be aligned with the pointer.

  1. If necessary to adjust the timing, loosen the distributor hold-down bolt(s) and/or nut and slowly rotate the distributor in the required direction while observing the timing marks.
  2. To complete the adjustment operation, tighten the hold-down bolt, taking care not to disturb the adjustment.
  3. Switch the engine OFF . Reinstall the rubber plug in the timing window and remove the timing light. Remove the jumper wire.



0900c1528005f368.jpg

Fig. Fig. 4: Service connector on 1988-91 Preludes


0900c1528005f36b.jpg

Fig. Fig. 5: Service connector on 1992-95 Preludes

Mar 03, 2011 | 1992 Honda Prelude

1 Answer

How to set timing belt on a 1985 Honda Accord


You need a timing light.
Hook up the timing light (follow it's instructions)
Warm the car, find the timing marks using the light.
Loosen the distributor and bump it forward or back, whichever corrects your timing.
The honda has three timing marks. I found it useful to dab some white out on the marks to make them easy to see.

Jul 04, 2010 | 1985 Honda Accord

2 Answers

How do i know if i set the timing belt right?


u must hav a haynes manual--dont start it if its not correct cause u cud warp the valves and then ud be changin motors

Apr 18, 2010 | 1991 Honda Accord

1 Answer

Timing marks


Click on the following Link. It has the Timing Belt and Markings - Diagrams you will need.

http://www.2carpros.com/car_repair_information/year/1994/make/honda/model/accord/1994_honda_accord_timing_belt_diagram_marks.htm

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Mar 12, 2010 | 1994 Honda Accord

1 Answer

I need to know where the timing marks need to be for a 1991 honda accord 1321 ci displacement


If you have not removed any of the pulleys that the belt goes around or you know they are in the correct positions on their shafts, the timing pointer must be aligned with the white mark on the flywheel(at the view port); the cam pulley must be set so that small dot or the word UP is vertical and the marks on the edges of the pulley are aligned with the surface of the head(you might have to use a straight edge to check).
Hope this helps you.

Oct 20, 2009 | 1991 Honda Accord

1 Answer

My lifters are getting really loud on my 91 honda accord ex


All you need is to adjust the valve tappet clearance back to the original specification. It is a time consuming effort and require passion to do it. You need to remove the top engine cover, set timing belt to top dead centre then adjust intake & exhaust valve clearance one by one. Rotare the cranckshaft 180 degree and repeat the valve clearance,. I would suggest to leave it to the expert.

Jul 15, 2009 | 1991 Honda Accord

1 Answer

Leak from the water pump


  • first of all you are probably going to need a torque wrench for the crank shaft pulley bolt it has 225lbs.of torque or more.I just did one on my 1991 honda accord dx .you have to take off a/c belt ,alternator etc. on the crank pulley.(I took it to a shop and they heated the 3/4 in. bolt and used torque wrench. I broke a half inch breaker bar trying to get it offf) next use puller to take off crankshaft pulley.support motor and remove motor mount bracket. take off upper and lower timing belt covers.take off timing belt and other belt using the tensioners.take off and replace water pump CHECK ALL TIMING MARKS with #1 piston@TDC. There are about 6.

Jun 02, 2009 | 1991 Honda Accord

1 Answer

1992 honda accord


there is timing marks on the camshaft where you line it up it can be difficult

Jul 30, 2008 | 1992 Honda Accord

Not finding what you are looking for?
1991 Honda Accord Logo

2,608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...