This is a tricky one your suppose to remove trhe lamp asm, but there still aplastic cover behind it they want you to remove the battery and other parts and fish it out after removing bolt you cant see only feel ive done this alot a learned a trick remove the light then with a hole saw cut a hole at the bottom of the plastic and you will get to relay.cut a hole about 3inches, hope this helps.
You will need to remove the passenger side headlamp assembly. Once it is out you can drill some small holes into the front support to gain access to the relay.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
92 views
Usually answered in minutes!
×