Question about 2001 Oldsmobile Alero

Open Question

High beams don't work, but low beams do - 2001 Oldsmobile Alero

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
isaid
  • 302 Answers

SOURCE: Low beams only quit high beams work, park lights

yes there is but it is probably da bulbs

Posted on Oct 06, 2009

Ad
RonPark
  • 855 Answers

SOURCE: In adjusting the headlights on a 2003 Olds Alero,

Unless a car has been in an accident it is very rare that the adjustment of haedlights change. the usual problem as in your case sounds as if the headlamp is not installed properly. It is either loose or not seated properly. So check there first.

Posted on Dec 31, 2009

  • 557 Answers

SOURCE: Right side low beam headlight stays on when high

right headlight is bad, all 4 should stay on

Posted on Oct 22, 2010

  • 367 Answers

SOURCE: high beam works low beam doesnt on on side on

Check bulbs and replace if nessasary. Always replace in pairs with quality bulbs.

Posted on Mar 06, 2011

  • 4977 Answers

SOURCE: Low beam head lights are

you may have a problem with the dimmer switch for the headlights.its located on the top of the steering colume at the base of the colume near the firewall.

Posted on Aug 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My right low beam light don't work it work good on high beam


replace light bulb{don't touch the glass part of the light bulb} or they will last only a month or less.

Mar 03, 2013 | Cars & Trucks

1 Answer

Low beam headlight drivers side don`t work. high beam it works.


Check tour bulbs first and replace if blown. If OK then check wiring backwards from light to dip switch.

Oct 05, 2012 | 1996 Ford Explorer

1 Answer

2005 navigator high beams work but low beams don't


First thing check to see that low beams are not blown....if not could be switch or relay problem...good luck and hope info helps....please rate my post...

Aug 16, 2012 | 2000 Chrysler 300M

1 Answer

Is there any fuses or relays that are not in the fuse box on a 2002 buick rendezvousfor the bright lights


The high and low beam lights use the same power source, so if the low beams work the high beams have power.
There is a low and high beam relay controlled by the dimmer switch.
If the low beams work and the high beams don't, and the bulbs are good, check the dimmer switch and the high beam relay.

Aug 04, 2012 | Buick Rendezvous Cars & Trucks

1 Answer

Low beams don't work on 1997 Honda Civic


If your high beams work and your low beams do not work... try changing the light bulbs first. The low beams can burn out and the high beams still work.

May 01, 2012 | 1997 Honda Civic

1 Answer

Click headlights to low beam and no lights work on high beam


I'm not sure exactly what your problem is. When you "click" your lights to low beam, your high beams should not work. But if your low beams work when you "click" them on, but your high beams don't work when you "click" them on, you either have a blown fuse, bad relay or high beam elements burned out on both lamps. (Not so unusual) Possibly a bad "dimmer" stalk switch or bad wiring, too, but a little less likely.

Sep 05, 2011 | GMC K1500 Cars & Trucks

1 Answer

My high beam lights work but my lo beam lights don't,can you help me


When you switch from High to Low beams, do the lights go out, or continue, in the "High" beam position??? If they go go, the transfer switch, that changes the high/low beam mode is working. The most likely problem, is that the Low Beam filaments are both burned out. Some, on original equipment, never changed, can burn out within days/weeks of each other. Could be that.

Sep 01, 2011 | 2004 Kia Sorento

1 Answer

The low-beam headlights don't work. The fuses are fine as I replaced them with those of the high-beams and the high-beams worked. Other than both bulbs burning out at the same time what else could be...


Possibly the bulbs. Take a look at them; they have 2 coils per bulb, one for the low beam and one for the high beam. So it is possible that the more used low beam burns out before the lesser used high beam.

Aug 19, 2011 | 2000 Chrysler 300M

Not finding what you are looking for?
2001 Oldsmobile Alero Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...