Question about Buick LeSabre

1 Answer

How can I replace turn signal on a 2003 buick Lesabre?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

First it's best to have an extra pair of hands to help you.
You have to open the trunk first. Then look at what would be the back side of the whole light assembly. There are approx. 8-10 nuts that are attached to the bolts/posts of the rear light assembly. Remove the nuts, lower the trunk lid to about waist high and carefully pull the assembly straight out. Watch that you don't scratch your paint with the posts. Have your helper hold the assembly while you remove the light socket for the bulb you want to replace by turning socket counter clockwise about a quarter turn and pulling straight out. Replace bulb and reverse process

Posted on Oct 01, 2010

Testimonial: "Thank you so much. I thought I would never find the answer. You wouldn't know how to do the front turn sugmal as well?"

  • INDIRA KUMAR
    INDIRA KUMAR Oct 02, 2010

    Two 7/16 bolts, one on left side of top of headlight assembly, other on the right side. Remove the bolts and slide headlight assembly out. Have to pull hard as there is a stud on the side of assembly that shoves into a hole on the fender. After removing assembly out of way you can reach blinker assembly below and replace bulb. 10 min job.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: signal bulb on 2003 buick regal

To change front turn signal –
open the hood; look in back of headlight; two white clips; pull straight up, and then whole headlight comes out including turn signal; it is all one unit; remove rubber cover, then you take bulb out of unit. Mechanism that bulb fits in will need to be turned clockwise (looking from the front) and pulled to get it out of the larger unit holding all lights. Be sure and put rubber cover back on before re-inserting the two white clips.

Posted on May 07, 2009

pcguru1
  • 1 Answer

SOURCE: Turn Signal Fuse or switch replacement? '93 buick lesabre?

Yes all the wiring needs to be complete. Then all the bulbs must be inserted into sockets. left side marker right side front turn back turn reverse lights brake light everything. Then make sure they all work. The problem could even be a bulb thats on the fritz ready to blow but still on and dim little light. if that's all fine then it's probably your flasher. There are 2 flashers one for turn and one for hazards but I think they are the same but still separate. located under dash on either side of the steering wheel. The flasher closest to the door is up in there pretty far it's size is about like a 2 liter cap and it's silver. good luck

Posted on Oct 07, 2009

ourhowse
  • 2007 Answers

SOURCE: replacing brake light bulb

OPen the trunk and remove the access cover. The bulbs just twist out from the rear.

Posted on Nov 18, 2009

  • 1 Answer

SOURCE: can't find the flasher under the dash

The flasher is located under the dash on the steering column on the left hand side. Pull off the plastic cover and you will see it clipped to the column--left.

Posted on Nov 19, 2009

johnjohn2
  • 5763 Answers

SOURCE: Where is the battery ?

the battery is in the engine compartment, should be on front passengerside, the signal is done from under the rear of the front lamp.

Posted on Dec 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my turn signal click twice as fast?


Turn signal clicks fast to let the driver know there is an open in the circuit most like caused by blown bulb.

Feb 16, 2015 | 2003 Buick LeSabre

Tip

How To Change Replace Front Turn Signal Light Buick Lesabre 2000-05 1AAuto.com


How To Change Replace Front Turn Signal Light Buick Lesabre 2000-05 1AAuto.com

on May 02, 2012 | 2005 Buick LeSabre

Tip

How To Change Replace Front Turn Signal Light Buick Lesabre 2000-05 1AAuto.com


How To Change Replace Front Turn Signal Light Buick Lesabre 2000-05 1AAuto.com

on May 01, 2012 | 2000 Buick LeSabre

1 Answer

2003buicklasabre turn signal blinks fast and arrow stays on continuosly after replacing bulbs


You may have replaced the bulbs with improper alignment as they only go in one proper way. Try replacing them again. One retention pin is lower that the other.

Oct 04, 2014 | 2003 Buick LeSabre

1 Answer

Turning Signals not working


if 4way flashers work & no signal,,,i would replace signal flasher,,,there are two flashers ,,,,

Apr 28, 2010 | 1989 Buick LeSabre

2 Answers

My turn signals quit working. Not sure how to fix


chack under the hood for the fuse box,under the fuse box you should have the description of all fuses,search for the one saying turn lamp,and test it with a multimeter or by eye sight,if its burn replace

Jan 20, 2010 | 1993 Buick LeSabre

1 Answer

02 Buick Lesabre turn signal issue


most likely a bulb. you should be able to get to it.

Sep 17, 2009 | 2002 Buick LeSabre

2 Answers

Popping sounds when turning the steering wheel


check pully belt(fan belt ) and hydralic fuel.....

Jun 30, 2009 | 2003 Buick LeSabre

2 Answers

Signal bulb on 2003 buick regal


To change front turn signal –
open the hood; look in back of headlight; two white clips; pull straight up, and then whole headlight comes out including turn signal; it is all one unit; remove rubber cover, then you take bulb out of unit. Mechanism that bulb fits in will need to be turned clockwise (looking from the front) and pulled to get it out of the larger unit holding all lights. Be sure and put rubber cover back on before re-inserting the two white clips.

Mar 16, 2009 | 2000 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...