Question about 2007 Toyota Tundra

1 Answer

Replaced both headlight bulbs and passenger side light still does not work on 2007 tundra

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 5,332 Answers

Check the fuses. I do believe there is a left and right side fuse for the headlamps. For some reason toyotas, especially highlanders, like to blow the fuses when the headlights burn out.

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tundra headlight


Is power coming out of the headlight switch to that bulb circuit?

Mar 24, 2014 | 2007 Toyota Tundra

2 Answers

WHY PASSENGER SIDE HEADLIGHT BULB ON 2007 YUKON DENALI WILL NOT WORK


Remove plug from light bulb, using 12 volt test light hook up ground to negative side of battery,then touch probe on positive terminal to make sure test light is functional.next- turn lights on and then probe the plug at each terminal- there should be one wire that has power and the test light should light up. If the test light lights up then you need to test the circuit ground for the wiring harness. So remove the test light clamp and put it on the positive post of the battery. Now retest the test light by touching the probe on the negative post on the battery and the test light should light up. Next with the headlights off-probe the other terminals and if there is a good ground in the harness the light will light up- if not then there is an open condition in the headlight harness- a broken wire or a bad system ground.If both tests are performed and either condition does not happen then a wiring schematic will be needed to perform the repair. This is after all fuses are presumed good.

Feb 04, 2013 | 2007 GMC Yukon Denali

1 Answer

My 2007 headlights wont turn on


It is hard to say without checking your headlamp electrical circuits, but it sounds like you may have possibly installed the wrong bulb or installed it incorrectly and possibly blew a fuse.

Mar 18, 2012 | 2007 GMC Yukon

2 Answers

Change headlight bulb or whole unit on 2002 tundra?


The bulb is replaced not the whole headlight.

Apr 26, 2011 | 2002 Toyota Tundra

1 Answer

Headlight come on , replace dimmer bulb but light comes on and goes back out. could it be relay or switch itself. The light and fog light work on driver side but not passenger side. IThis problem occur...


it sounds as though there is a loose connection on the passenger side. Check socket and switch bulbs from driver and passenger side. hope this helps tim

Sep 05, 2010 | 2001 Hyundai XG300

2 Answers

What is the DRL warning light on the dashboard of my 2007 Honda CRV?


On my 2007 Honda CR-V The DRL code appeared on the dash board. Additionally I had only one high beam (on the passenger side); both low beams were fine, but I did not have a Daytime Running Light on the drivers side. The DRL code was really misleading because the real problem was that the high beam element in the headlight bulb was burned out. Note that the daytime running light is not a seperate bulb -- it is the high beam element which is powered at a low voltage. Once I replaced the head light bulb everything worked fine and the DRL code on the dash board was gone. So if the DRL message appears what you really need to do is replace the headlight bulb (there are YouTube videos which show how to do this - but search for headlight replacement, not for DRL fix). Be careful not to touch the new bulb with you hands since premature burnout can occur from the grease off your skin. I got my bulb from Wal-Mart for $8.88 (it's a 9003/HB2 for the 2007 CR-V) -- that's a pretty cheap fix.

Feb 27, 2010 | 2007 Honda CR-V

Not finding what you are looking for?
Cars & Trucks Logo

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...