Question about 1991 Honda Prelude
The speedometer sensor is located on the top of the transmission. It is
held on by one bolt. Remove the bolt and gently pull and turn the
speedometer sensor and the whole assembly will come out of your
Park your Honda Prelude on a level surface, activate the emergency brake and place blocks behind the back tires for safety. Disconnect the negative battery cable with a terminal puller.
Raise the vehicle on the side of the wheel speed sensor's location. Remove the wheel and tire assemblies.
Disconnect the sensor electrical connection from the wiring harness.
Take note of the connection location for the sensor retainers, grommets and clips. You will need to know this information for the installation process.
Start at the connector end of the sensor cable and remove grommets, clips and retainers in order to free the harness.
Unscrew the sensor mounting bolt and remove the sensor from the differential housing.
Install the new speed sensor by reversing the removal process. Loosely secure the sensor and sensor harness connection in place, taking precaution to keep the harness from twisting or bending. Once in place, torque the sensor mounting bolt to 16 foot pounds (22 Nm). Tighten any bracket bolts to 84 inch pounds (10 Nm).
Lower the vehicle safely and reconnect the negative battery cable. Refer to your owner's manual to perform an ABS system check to confirm that you installed the sensor properly.
Posted on Oct 01, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 10, 2015 | 1986 Honda Prelude
Jun 30, 2010 | 1991 Honda Prelude
Nov 24, 2009 | 1992 Honda Prelude
Aug 06, 2009 | 1991 Honda Prelude
Apr 28, 2009 | Honda Prelude Cars & Trucks
275 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: