Question about Pontiac Aztek

2 Answers

Why does the bright light idicator flahs and the service veh light come on when I start the car and the n, when put in to drive the bright light indicator gos off or when switched from auto to manual on light switch?

Posted by on

  • tom_palmer85 Oct 01, 2010

    why does the bright light indicator come on along with the service vhe light when I put it in gear? Then when I turn the light switch from auto to manual the bright light indicator goes off **** the service vhe light stays on .

×

2 Answers

The best thing to do is drive your vehicle to the local auto parts store and borrow (for free) there OBD II scan tool. This electronic tool attaches underneath the drivers side steering wheel and it will obtain the trouble code from your vehicle computer. After you find out what the code number is you will need to look in the back of a Haynes repair book and match the number you found with the number in the book to pinpoint the component that has failed. This will save you alot of time and from buying the wrong parts

Posted on Oct 01, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 17,970 Answers

Its possible that you have any problem with loss wires in dash, or any ground as result bad connections. I'll take off the dash to check.

Keep us updated.

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 olds 88 vibration when holding steady speeed


that could be transmission issue/ front end issue/ with out driving the vehicle hard to say.
my 88 had overdrive shudder going up hill transmission need a rebuild. that all i got with out driving the veh srry.
when trying to figure out what going on with the veh you need to isolate the cause of the vibration , front. rear of the veh.put the veh on jack stand and drive it see if you can figure were that vibration is comeing from

Mar 07, 2015 | 1997 Oldsmobile 88

1 Answer

1999 olds bravada service engine soon flashing not check engine light when I start then remained on while driving what's the difference and how do I fix this?


this is the same as a check engine light, these veh call it that. go to loca parts store and get us the codes and we will go from there

Jan 27, 2014 | Cars & Trucks

1 Answer

Will not start after turning off, will make loud clicking noise, after putting car in neutral and then back in drive will start most of the time, unless battery runs down


wish I knew what kind of veh.you have but this sounds like a problem with the nutral safty sw. on some veh.this can be quite commom

Aug 26, 2013 | Cars & Trucks

1 Answer

I HAVE A '99 LINCOLN NAVIGATOR WITH A ELECTRICAL PROBLEM. NEW BATTERY AND ALTERNATER AS OF YESTERDAY. APPEARS TO BE CHARGING BY THE INSTRUMENT GAUGE BUT AS I WAS DRIVING TO WORK THE BATTERY SYMBOL DASH...


Items to check:
Try wiring behind alternator.may be full of corrosion.
One of the accessories maybe shorting out and draining battery.
(Techns know how to find this out)

Aug 24, 2010 | 1999 Lincoln Navigator

1 Answer

The Security Light came on . It was on about a


Security light has to do with just that, security and nothing else. Has to do with the Factory Anti-Theft System called VATS. If you look at your key on the silver part there is a metal contact surrounded by black plastic, thats a resistor that the veh reads every time you put your key in. Once it reads the resistance then it lets the veh start. Nothing to do with AC or how hot it is out side.

Jul 22, 2010 | 1997 Oldsmobile Cutlass Supreme

1 Answer

I start my car this morning and engine service soon idication falshed more then one time and continue flashing my question is is it safe for me to dirve the car till monday as i feel the shakes while i am...


If the service engne soon light is flashing, it means you have a hard failure, that is occuring at that time. If the car is shaking, it sounds like some sort of misfire. If you continue to drive it, you risk permanent damage to the engine, and catalytic convertors.

Apr 11, 2010 | 2003 Nissan Altima

1 Answer

2003 Mitsubishi Spyder Eclipse, green wrench/car lt, not running


that means it needs service. also probly means that something is either loose or broken wise. you were probobly receiving a service engine soon signal when you put the keys in the ignition and turn it one slot to where the car is running on battery so the radio should work. and thats where the idicators would of been going on. and you probobly didnt notice those

Aug 07, 2009 | 2003 Mitsubishi Eclipse Spyder

1 Answer

93 grand ltd Stalls after intial start all dummy lights come


greetings: the reason your veh will not run is because the security system has been activated. it will allow you to start it but the security system kills the motor so the veh can not be driven off if in fact it was being stolen. if you have the remote control, lock the veh and then unlock it. this will shut the security system down and return your veh to normal and it should start and run normal. i have a 93 and 94 both worked this way. using the key to lock and unlock to shut the system did not work for me but the remote did the job.also anytime the batt cable is removed, the security system will activate when you put the batt cable back on. then you have to do what i described above on mine to deactivate the security system. the manual says use the key to deactivate the system but that does not work on mine. i hope this helps have a great day wayne

Feb 04, 2009 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...