Question about 2002 Chrysler Town & Country

1 Answer

Backfire- just replaced plugs and wires and now have a backfire, need wiring diagram to make sure replacement was correct switched from champion platinum plugs to bosch 2 platinum and bosch wires

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 5,332 Answers

Cylinders 1-3-5 are on the back side of the engine. Cylinder 1 is the passenger side and cylinder 5 is the drivers side.

Cylinders 2-4-6 are on the front of the engine. Cylinder 2 is on the passenger side and cylinder 6 is on the drivers side.

The coil pack will have the cylinders labeled at each post.

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 montecarlo 3400 sfi. I just replaced lower intake gaskets reassembled engine now car cranks but wont start, and backfires. Had it running for 30 mins the other day but ran ruff


Is it possible some of the push rods are in the wrong holes ?
Are you sure everything is hooked up correctly ?
Vac lines, wiring, plug wires ?

Feb 21, 2015 | Cars & Trucks

1 Answer

Replace ignition wires 1993 cadillac deville


Not sure I understand the question.
If you are replacing the switch and the wiring plug you would splice the wires together.
Do you need the diagram for the switch ?

eac84f78-6c4e-4102-99ad-0c94cfb48d07.gif

Jul 28, 2013 | 1993 Cadillac DeVille

1 Answer

My 2003 Chrysler Voyager, 3.3L, SFI, runs very rough and at times it almost dies out while driving. The engine seems to choke up at times. I just replaced 6 old spark plugs with 6 new spark plugs, Bosch...


Chrysler Voyager seem function well on Champion spark plugs. I had the same issue and only after buying Genuine Champion Plugs, the car resonded with power

Sep 21, 2011 | 2003 Chrysler Voyager

1 Answer

While cranking loud backfire than i restart engine again than it cranks than starts up,this happend about 6 times during 3 months. Car did same thing yesterday, but it just cranks won't start 98 olds...


Not sure if you have a 1996 Cadillac Seville or a 1998 Olds Aurora but I would check the Ignition Coil Packs. One or more of them may need to be replaced. Also if you were working on the car and got the wires plugged onto the wrong coils then the firing order sequence would not be correct and this can cause a misfire or backfire conditon.

Ignition wires cannot rest near the primary wire harness of the ignition module, which can cause electrical interference and a no start condition or a misfire condition

On my friends 1997 Cadillac Seville it was easy to replace all 4 coil packs took less than 30 minutes and made the car run much better. Just make sure to get the firing order right. If necessary find a diagram of the correct firing order for you vehicle.

A good place for mail order auto parts is rockauto.com

I have pasted a picture below of what an ignition coil pack looks like




octech4hire_0.jpg

Jan 02, 2011 | 1996 Cadillac Seville CA Value

1 Answer

Check engine light shows misfires in two cylinders and backfires.


Yes it could. make sure to use the correct champion plugs as well. Make sure your firing order is correct as the intake shouldn't cause a back fire. 1-8-4-3-6-5-7-2.

Jun 29, 2009 | 1999 Dodge Durango

1 Answer

Having rough idle and backfiring!


Still have a wire crossed somewhere. That is why you are getting the backfiring. Recheck firing order and make sure it is correct.

Jun 10, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Runs rough/worse, backfire sputters, smell fuel


make sure all wires are secure on the plugs. Make sure that if you bought the plugs aftermarket, that they are the suggested equipment from the Ford (http://www.car-stuff.com/carparts/fordtaurus20002000motorcraftmisp432154315.html Make sure the plugs (gap) were not damaged during installation. Check the firing order is correct. (1,4,2,5,3,6)

Jun 09, 2009 | 2000 Ford Taurus

1 Answer

Car runs bad after replacing spark plugs and wires


Make sure the part store gave you the correct plugs and wires. Consult a third source for a firing order.

Jan 06, 2009 | 1992 Mazda Protege

2 Answers

Changed spark plugs and wires. car is running very rough now.


check to see if the wires are in right order and if the plugs and wires are the correct ones for vehicle

Jul 18, 2008 | Buick LeSabre Cars & Trucks

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...