Question about 2001 Ford Escape

1 Answer

Ignition engine speed input circuit malfunction

What do i need to do to fix this ,ive changed the coilpack and the timing beltwhat else could i try

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

The only thing controling your engine speed is the crank sensor and the ignition module,
i don't beleive this car come w/ ignition distribuitor but if it does then that one control it too

Posted on May 28, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ive changed the crankshaft sensor coilpacks an when I trun the key it wont start so I took plug wire off plug an truned the key an it only sparks one time on my 2005 honda santFE


you really need to step back and start over with the basics and move on from there...
timing belt
fuel pressure
things like that

Oct 30, 2014 | Cars & Trucks

1 Answer

Why dont i have any spark,ive just replaced my coilpack on a 2007 kia optima 2.7?


have the OBD codes read as probably a sensor this will pinpoint the problem saving you time and money searching about

May 01, 2014 | 2004 Kia Optima

1 Answer

Where are my spark plugs located in my 02 Gmc envoy?


Attached is a diagram of where the plugs and coilpacks are located, you need to remove the air intake resonator box to access this area. Plugs should be changed around 100K miles. Use only AC Delco 41-103 Iridium plugs. #1 is the coilpack and #5 is the spark plug



10_15_2012_10_53_12_pm.png

Oct 15, 2012 | 2004 GMC Envoy

1 Answer

I have a 1993 mitsubishi gto v6 that once warmed up misses underload between 1500 and 2000rpm ive changed the spark plugs and suspect it might 1 of the coils


IF ITS ONLY MISSING AT THOSE RPMS THEN IT COULD BE A NUBER OF THINGS LIKE CAS BEING OFF, SPARK PLUGS GAPPED INCORRECTLY,FUEL FILTER,FUEL PRESSURE REGULATOR,NO POWER TO AN INJECTOR ,TIMING OFF ,ECU,N YES COILPACK, START SMALL BECAUSE IF IT WAS COIL PACK IT WOLD DO IT CONSTANTLY, N SOMTIMES WHEN ECU IS GOING OUT IT DOES FUNNY STUFF LIKE THAT LIKE NOT LETTIN SOME THINGS WORK AND THROWIN CELLS ON OTHERS N BUY THA TIME U FIG ITS ECU U ALREADY BOUGHT EVERYTHING

Apr 10, 2011 | 1992 Mitsubishi 3000GT

4 Answers

Nissan micra k12. not idling properly, low power, not staring all the time. continuous problem. replaced throttle with 2nd hand part. better for a while. now car wont start, if it does it hunting,(sound...


HI, I GOT NISSAN MICRA 1.2 SE 2005 PLATE ONLY DONE 59000 MILES. MISSING! I HAVE CHANGED COIL PACKS, CAMSHAFT SENSOR, TIMMING CHAIN, STILL THE SAME PROBLEM. I HAVE ALREADY SPENT 1000.00 POUNDS. IS THERE ANYONE WITH SAME PROBLEM?

Jan 29, 2010 | Nissan Micra Cars & Trucks

1 Answer

Car sputters and no power, now it will not crank


Check the coil pack. they are common to fail and the engine will usually misfire for a while and then not start when it gets cold out. you can do a quick check by removing one plug wire at a time and having someone crank the engine. the spark should jump right down the tower the wire goes onto to the base of the coilpack. if this does not happen then you need to replace the coilpack first. take the 6 tork head screws out and remove the wiring under it that goes to the module. carefull not to mix up the wires under the coilpack or to the spark plugs. reinstall the coilpack and reinstall the plug wires and try to start the engine. i will look for a response incase you need more help. good luck.

Dec 31, 2009 | 1991 Buick Park Avenue

1 Answer

2002 econoline van Check engine light on. Code: P0307. Has to deal with spark plugs. Fix???


that is a number 7 misfire. try replacing the plug and coilpack. you can also swap coilpacks with another and see if the code changes. I am assuming its a 4.6 or 5.4 engine. you can get away with just the coilpack and dont forget the boot also. get only oem ford parts. probably cost about 120-150 dollars. did water get in it? can you erase the code or is it a hard fault? I try with info I have,sorry

Jul 14, 2009 | 2002 Ford Econoline Cutaway

Not finding what you are looking for?
2001 Ford Escape Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...