Question about 2007 Honda Odyssey
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hold in the trip meter button on the dash before you turn on the key... keep the button pushed in, turn the key on, and wait until the light goes out( 10 sec or so)
Posted on Dec 18, 2008
I would not recommend using Dexron III. Honda Odysseys are prone to transmission problems. A drain and fill with Genuine Honda Fluid is Recommended. The drain plug can be removed with a 3/8 ratchet at the bottom of the trans. The fill hole is at the top of the trans. You remove it with a socket on a long extension. The capacity is close to 3 quarts
Posted on Apr 07, 2009
Honda say thats not true and to wait until the car tells you when to change it. I have a 2008 CRV and you should and can wait till the oil say 15%! We took ours in after a long road trip for our first oil change. We had over 5K and the oil said 65%. The guy said that we did not need to bring it in. We still had change it while it was their but the car goes around 8-9 K on a oil change. A little wrench will come on and the oil life % will come on when it reach15% and will come on every time you start the car till you get it changed.
Posted on Sep 10, 2009
Have supplies ready(long stem funnel to reachfill hole, 4 qts honda genuine atf-z1, rags for drips)
1. First, park the car while its hot on a flat surface and turn the engine off. Locate the yellow transmission dipstick and remove it and wipe it clean.
2. Look for the the ATF fill plug and washer(below and to the left of the brake fluid reservoir) 17mm marked "ATF" and remove it.
3. Locate the drain plug(not the one on pointing towards the drivers front tire but its located on on the drivers side of the transmission pointing towards the passengers side and lying horizontally) and remove it along with the washer. Its blue and is a standard 3/8 square drive plug and remove it. Drain completely. (wait 15 min or so until ALL is gone and replace the plug after throughly cleaning the magnet that is attached to it).
5. Replace atf fluid(honda says 3.3 qts- but mine took 3.8 to bring to first hole in dipstick level-check while running(use honda z-1 fluid only-yes- its expensive).
6. Replace fill bolt and washer and tighten.
7. Replace dipstick, let engine get hot and recheck. Recheck again after driving a day or so.
Your done-good work, you saved a $100 dollars...
It can be changed for every 60000 miles..
Posted on Dec 19, 2009
you will need
5/8 spark plug socket
3/8 extension (it could be 4in and longer)
and spark plugs factory plugs are pregap iridium
spark plug torque is 13.0 lb.ft
coil torque 8.7 lbf.ft
spark plug part # NGK 1zfr5k-11
# DENSO pkj16dr-m11
and spark plug anti seize on spark plug thread
what you need to do is remove the plastic cover 8mm socket or 10mm sockets
now remove the spark plug covers and remove the spark plug coils too 10mm head bolt you will need a 5/8 spark plug socket and a 3/8 ratchet and a 3/8's extension too
you need OEM spark plugs they work the best
hope this will help
Posted on May 22, 2010
Tips for a great answer:
Feb 09, 2015 | 2005 Honda Odyssey
Aug 16, 2014 | 2002 Honda Odyssey
Apr 18, 2014 | 2008 Honda Odyssey EX-L
Aug 18, 2013 | 2008 Honda Odyssey
Lets get started. Place the key in the ignition and turn as if to start your minivan - but do not actually start your Odyssey.
Jan 25, 2011 | 2005 Honda Odyssey
Sep 19, 2009 | 2002 Honda Odyssey
Aug 06, 2009 | 2005 Honda Odyssey
Jul 05, 2009 | 2004 Honda Odyssey
Dec 18, 2008 | 2005 Honda Odyssey
Aug 27, 2016 | 2007 Honda Odyssey
415 people viewed this question
Usually answered in minutes!