Question about 2001 Audi A6

2 Answers

Would you have a DLC connector pin-out that has CAN-H and CAN-L wire colors?

Posted by on

  • 2 more comments 
  • jranderson Oct 01, 2010

    Hi Taran_2005: No these are multi-colored wires (i.e. green/red or green/blue). I ID'd the power (red) and the two ground (brown) wires at the DLC. Alldata describes the colors being orange/green and orange/brown, but, those wires are not attached to the DLC of the 2001 Audi A6 I'm working on.



    The problem is that we've used 4 scantools to connect with the comfort module, and all four scantools cannot communicate with the comfort module. That tells me that one or both of the CAN cables from the DLC to the comfort module is open.

  • jranderson Oct 01, 2010

    Hi Taran_2005



    Here's some more information that might be helpful to you:



    Make: Audi



    Model: A6



    Year: 2001



    Submodel: 4.2 QUATTRO TIP



    CC Rating: 4,172cc



    VIN: WAUZZZ4B72N018515



    Engine no.: ASG001811





    Thanks!

  • jranderson Oct 01, 2010

    Hi Emission whiz, I am asking the question as I am an upcoming EFI diagnostic technician. At the shop, I have repaired a vehicle that scantools could not "talk" to an ECU. I diagnosed the problem to one open DLC cable to the ECU. That vehicle, I knew the colors of the wires. In this vehicle, I don't know the colors of the wire from the DLC to the ECU. Once I know the colors, I'll be able to do continuity tests from the wire at the DLC to the ECU in question.

  • jranderson Oct 01, 2010

    Thank-you...I will have a look at Alldata

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Audi Master
  • 76,846 Answers

Why are u asking this question?

Posted on Oct 01, 2010

  • yadayada
    yadayada Oct 01, 2010

    continued

  • yadayada
    yadayada Oct 01, 2010

    the only place to get this detailed info is in the factory service manual, we don't have the manuals for any car at fixya, suggest u subscribe to www.alldata.com they have all factory manuals avail for a reasonable price on line

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

I think it would have green and red color wires.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Oct 01, 2010

  • taran_2005
    taran_2005 Oct 01, 2010

    Thanks for your response!!

    Take a look at :-

    http://sites.google.com/site/stoyneff/el...

    I think this might help.In the meanwhile, i could check if i could get the exact details for this model.

    Thanks!!

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Healeyman
  • 1198 Answers

SOURCE: need wiring color code for a 2000 saturn SL2 for hooking up a trailer light four pin connector

The trailer wires are left turn, right turn, running lights(the smaller elements on both tail-lights and any side lights) and ground. Energise the corresponding lights and connect the wires accordingly. Find a good ground. A piercing test probe will find the correct wire for you if you can't track it to the bulb.

Posted on May 06, 2009

  • 462 Answers

SOURCE: 2000 Cavalier DLC wiring.

Check the CIG fuse it goes directly to pin 16. It also powers the cigarette lighter. That fuse should be in the I/P fuse box.

Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2 WIRES FOR 12V SUPPLY. PIN NOs 2 WIRES for Signal PIN Nos. ??


How PC Fans Work - PCB Heaven

pcbheaven.com/wikipages/How_PC_Fans_Work/
Mar 29, 2010 - The connector of a 2-wire fan has a red and a black cable. ... The firsttwo wires are the power supply of the fan. ... This fan is designed to be controlled with a PWM signal and .... I have a four-wire (red black yellow blue) 12v fan out of an old .... My case has a number of 2 pin outputs for multiple case fans, ...

Motherboard Power Connectors ' PC Repair and ... - InformIT

www.informit.com > Articles > Hardware

InformITFeb 28, 2003 - Table 3.3 ATX Main Power Supply Connector Pinout (Wire Side View) .... The auxiliary connector has no +12v leads at all, so that is no help. Pulling up to ...Pin. Signal. Color. Yellow. +12V. 3. 1. Gnd. Black. Yellow. +12V. 4. 2.

ATX 24 pin power supply connector pinout diagram ...

pinouts.ru/Power/atx_v2_pinout.shtml

Rating: 52/60 - ‎60 votes
Jan 28, 2014 - Pinout of ATX (ATX12V) 24 pin power supply connector and layout of ... and later (ATX12V 2) is common ATX standard, 24 pin connector. ... Power Ok is a status signal generated by the power supply to notify ... 10, 12V, Yellow, +12 VDC ... 18 AWG is recommended for all wires except pin 11, which should ...

ATX power supply connector pinout diagram @ pino


Dec 16, 2015 | Cars & Trucks

1 Answer

When I connected diagnostic/testers to the OBD-II connector on my 2007 Hummer H2 SUV, they did not work at all, does anyone know why ? What are the exact pinout of this connector on Hummer H2 ?


Data Link Connector (DLC) Pin
Wire Color
Circuit No.
Function
1
--
--
Not Used
2
PU
1132
Class 2 Serial Data
3
--
--
Not Used
4
BK
1050
Ground
5
BK/WH
1851
Ground
6-15
--
--
Not Used
16
OG
640
Battery Positive Voltage

Dec 26, 2014 | 2007 Hummer H2 SUV

1 Answer

Hello......can anybody give any solution for this problem : my VGA Cable disconnect from the 15 Pin gents connector of Crt monitor of philips model no. 107E61 I want to fix it but I could not understand...


These connectors come with 15 pins and 9 pins. But be carefull, the nine pin connecter uses a tottaly different color code. Thats for an oldschool gamepoort or midi connector. But I think the vga connector has 3 rows of pins total of 15. But the nine pin connector has probably two rowes of pins. And thats no vga connector, but an connector for an serial port.
If it has three rowes (see Fig-2 below) but uses 9 pins then its an RGB instead of VGA.

Fig-1
9pin connector-lynizmacl5nyyorokj2lwlmh-4-0.png
Fig-2
vga-lynizmacl5nyyorokj2lwlmh-4-2.jpg
Fig-3
rgb or vga-lynizmacl5nyyorokj2lwlmh-4-5.jpg

Mar 19, 2017 | Cars & Trucks

1 Answer

97 buick century has no data from OBD2 scanner.


The protocol is class 2 . Maybe your code reader is no good .
012 GM Class II Communications

Data Link Connector (DLC)
The data link connector (DLC) contains the following serial data links:
• Class II
• Entertainment and Comfort (E&C)
The DLC also provides a power source for the scan tool as follows:
• Unswitched voltage (B+) at DLC terminal 16 (circuit 1450)
• Ground at terminal 4 (circuit 1450) and terminal 5 (circuit 1550)

Class II Serial Data Link
The class II serial data link allows the following modules to communicate data with each other:
• Body control module (BCM)
• Electronic brake traction control module (EBTCM)
• Heater-A/C control (if equipped with RPO CJ2)
• Instrument panel cluster (IPC)
• Powertrain control module (PCM)
• Inflatable Restraint Sensing and Diagnostic Module (SDM).
The Class II serial data link allows a Scan Tool scan tool to communicate with the above modules for diagnostic and testing purposes. The Class II serial data link is located at the DLC connector terminal 2. Terminal 2 consists of the following circuits:
• Circuit 1036
• Circuit 1037
• Circuit 1128
• Circuit 1049
• Circuit 1122
• Circuit 1132
Entertainment and Comfort (E&C) Serial Data Link
The entertainment and comfort (E&C) serial data link allows a scan tool to communicate with the radio or the mobile telephone handset the remote CD player (if equipped). This communication is for diagnostic and testing purposes. The E&C serial data link is located at the DLC connector terminal 14, circuit 835.
PIN #9 goes to the air bag module .

Aug 04, 2017 | 1997 Buick Century

3 Answers

How do I access DLC Port location in a 2002 Honda Odessey Minivan?


On 2002 Honda Truck Odyssey 3.5L MFI SOHC VTEC 6cyl the OBD Diagnostic Link Connector is located under the instrument panel in the driver's side. It is bolted to the kick panel and is gray in color on the 1998 and newer models.

Also refer to Haynes manual in the emissions and engine control system section .

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Dec 12, 2011 | 2002 Honda Odyssey

1 Answer

Where is the computer plug in 2001 ford focus


The computer plug or DLC connector is located under the dash on the drivers side just above where your left leg would be. It is black in color and is a 16 pin connector.

Jul 09, 2011 | 2001 Ford Focus

2 Answers

Tail light wiring connectors and wiring diagram


A test light checking each connector would be faster and easier to do. Maybe somebody may have a illustration for you but by far a simple test light is all you need with a helper turning on the different lights as you check them out and writing all your findings down

Jan 22, 2010 | 1997 Ford F350 Crew Cab

1 Answer

I have a 1999 pontiac grand am and the reverse lights and brake lights work but i can not get the tail lights to work. I discovered that the reverse light on the bottom of the car is missing the connector...


Pin
Wire Color
Circuit No.
Function
A
BRN
9
Parklamp Feed
B
LT GRN
24
Backup Lamp Feed
C
BLK
750
Ground
Pin
Wire Color
Circuit No.
Function
A
BRN
9
Parklamp Feed
B
LT GRN
24
Backup Lamp Feed
C
BLK
750
Ground
Pin
Wire Color
Circuit No.
Function
A
BRN
9
Parklamp Feed
B
LT GRN
24
Backup Lamp Feed
C
BLK
750
Ground
Find 3 wire connector going to lense in trunk Pin
Wire Color
Circuit No.
Function
A
BRN
9
Parklamp Feed
B
LT GRN
24
Backup Lamp Feed
C
BLK
750
Ground
Pin
Wire Color
Circuit No.
Function
A
BRN
9
Parklamp Feed
B
LT GRN
24
Backup Lamp Feed
C
BLK
750
Ground
brown wire light green wire & black blk is grd moke sure its good, lit grn back up lights,drk Pin
Wire Color
Circuit No.
Function
A
BRN
9
Parklamp Feed
B
LT GRN
24
Backup Lamp Feed
C
BLK
750
Ground
brn tail lights turn parking lights on & with a test light back probe connector no power to brown? ck fuse trace harness to switch wires all good bad switch if you know how to use ohm meter you could use that to ck for shorts on continuity Pin
Wire Color
Circuit No.
Function
A
BRN
9
Parklamp Feed
B
LT GRN
24
Backup Lamp Feed
C
BLK
750
Ground

Aug 30, 2009 | 1999 Pontiac Grand Am GT

1 Answer

2000 Cavalier DLC wiring.


Check the CIG fuse it goes directly to pin 16. It also powers the cigarette lighter. That fuse should be in the I/P fuse box.

Jul 26, 2009 | 1997 Chevrolet Cavalier

Not finding what you are looking for?
2001 Audi A6 Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...