Question about 1994 Geo Tracker
Dead Injector 8valve.
use a NOID lamp to see if ECU is pulsing this
see line that says injectors....xxxxxx
Posted on Apr 30, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1992 geo tracker will not run
The ECM has a blown capacitor inside it for opening the injector you will most likly need to get it rebuilt, buy a new ,or used ECM had the same problem with my sidekick.
Posted on Mar 16, 2009
91 , is 8v motor. know it well and have full docs on it.
rolling it off , 5sp push starting dumping clutch. yes.
you forgot to say the magic words.
does it crank on its own , robustly.
,any engine will run with out a starter.
you need to elaborate on the symptoms.;
you forgot to say how you started car with test fuel.
how far did you go , with push start, 1 mile , 50 miles?
im going to guess this is a NO CRANK car.
here is my nocrank page.
this is a solution.
all posts on this system are all lacking proper symptoms.
Posted on Oct 21, 2009
timing belt lasts 100k and then slips.
bad MAF sensor.
bad fuel pressure due to bad pump or regulator on front of rail.
can be many many thing , but this is 3 reasons.
Posted on Oct 22, 2009
SOURCE: 1993 geo tracker fuel injector
ecm does control but is also based on input from the Throttle position senser. unplug the TPS and try again. Also make sure the ECM and engine grounds are good
Posted on Feb 21, 2010
Tips for a great answer:
Sep 02, 2017 | Geo Cars & Trucks
Sep 23, 2014 | 1990 Geo Tracker
Mar 02, 2011 | 1992 Geo Tracker
Jun 04, 2017 | 1993 Geo Tracker
Feb 14, 2010 | 1993 Geo Tracker
Feb 12, 2010 | 1989 Geo Tracker
Oct 07, 2009 | 1990 Geo Tracker
May 20, 2008 | 1994 Geo Tracker
450 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: