Question about 2003 Volkswagen Golf
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Rear Brake Light
In the trunk, just un clip the light cluster, twist out the bulb, and renew the stop bulb, refit the light cluster.
Good Luck !
A FixYa rating would be appreciated please !
Posted on Feb 07, 2009
This is a common occurance in vw's.
In order to turn off the airbag light you need to have a scan tool hooked up to your car because the airbag detected a fault of some sort, or it could be a faulty component in the airbag system itself.
Posted on Mar 04, 2009
Inside the boot is a plastic cap embeded in the boot liner. Remove the cap to reveal a screw. Undo the screw and the whole rear light cluster will come away in a sideways and not rearward direction to reveal all of the bulbs. Hope this helps.
Posted on Jul 11, 2009
You will probably find it is a problem with the switch on the brake pedal.
Get your self a cheap multi meter from an electronics store. Set it to meaure ohms. This is used to check if a connection is complete.
Take the wires off the switch on the brake pedal and test if the connection is open or closed. Push the pedal and check the connection again.
If the switch only had one wire then the negative connection is made to the body of the car. Put one probe of the volt against bare metal of the body somewhere and the other agains the terminal of the switch and test again.
This should tell you if the switch is broken. if the switch is good then you probably have a short circut somewhere between the brake lights and the switch. That is something has pinched or other wise broken the wire and it is touching metal of the car. You will have to follow the wires as best you can and look for damage.
Hope this helps
Posted on Sep 25, 2009
this is a turn in caliper, meaning that as you try to compress the piston, you also need to rotate it clockwise. you can buy tool for this at nearly any parts store, and is fairly inexpensive.
Posted on Dec 28, 2009
Testimonial: "Thank you for your assistance. I found out the turning piston part by mistake, a day after I posted the question, when I tried to use a G-Clamp."
Tips for a great answer:
Nov 08, 2014 | 2005 Volkswagen Polo 1.9
Jul 01, 2014 | Volkswagen Golf Cars & Trucks
Dec 28, 2009 | Volkswagen Jetta Cars & Trucks
Dec 24, 2009 | 2003 Volkswagen Golf
Sep 10, 2009 | 2003 Volkswagen Euro Passenger
Jul 18, 2009 | 2003 Volkswagen Passat
Jan 22, 2009 | 1996 Volkswagen Golf
Jan 10, 2016 | 2003 Volkswagen Golf
784 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: