Question about 1993 Nissan Maxima

1 Answer

I have a maxima 1993 I change brake pump and booster and front pads and rear choose.. And the brake pedal keeps going down a little by little. It's like if was loosing some presure.. Some where.. Not so sure about it.. And I did bleed the brake/s but I don't know if I did bleed it in the wrong tire order.. It's there any tire order to start bleeding it.. Like first on the back tire to the front one's or how can't I fix it.. Thank you... Very very..

Posted by on

  • cheap repair Oct 01, 2010

    you must bench bleed the master cylinder first.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 48 Answers

If you are losing peddle and their are no leaks in the system, meaning you have to keep adding fluid then you have an internal leak in the master cylinder . if it was just air in the lines, not bleed right you would have a spongey peddle meaning it would stop but the peddle would feel like rubber, or it would pull to one side

Posted on Oct 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 buick lesabre changed the front rotars and pads and now the cars brake pedal is so hard to push down to get car to stop. Mechanic has checked both the front and back brakes and they are fine. T


I would jack up a front wheel and see if pushing on the pedal with the engine running will stop the wheel from turning.
You need to know if the pressure is reaching the wheels, or if the pads and rotors are too slick to stop the car.
Usually if the pedal is hard, the booster is not working or the brakes are glazed.
Can you stop the car with the parking brake ? That only uses the rear brakes.
You may need a second opinion from a different shop.

Jul 19, 2012 | Buick LeSabre Cars & Trucks

4 Answers

Brake pedal goes nearly to floor front pads, calipers, brake hoses changed, rotors turned Master cylinder changed, brake booster check valve changed rear brakes checked, drums good no ridge, shoe's...


I would go with not bled correctly

The booster should hold up with a hard pedal until
you start the engine, then vacuum causes it to move
down when pressing on the brake

Sep 16, 2011 | Saturn SC Cars & Trucks

3 Answers

Have a 1993 dodge Caravan SE. Purchased it from a man which converted it from ABS to hydraulics. I didn't know it had brake problems till i got it running. He put on a 3 outlet 2 inlet proportional...


if something goes wrong with abs the brake system it reverts back to standard system!! If you can pump brake pedal up and hold it and start engine and it drops thats normal.You say low pedal if you go 15mph on road and check where pedal is when brakes apply.Power brakes will push aLMost to floor while stopped but while moveing you`ll almost go to slide or will go into slide if pedal is pushed to floor.Get on some gravel at 10 mph and hit brakes to a complete stop get out and check to see if all 4 tires slid or 2 front or only 2 rear. this will get you closer to problem good luck.

Jul 12, 2011 | 1993 Dodge Caravan

1 Answer

1993 ford mustang brake pedal goes down on its own and brakes


Check the vacuum brake booster and check valve maybe there is a problem there that is amplifying the vacuum inside the booster and applying the brakes. I hope this helps, let me know.

Aug 02, 2010 | 1993 Ford Mustang

1 Answer

Fiat Uno Pacer - Brake Booster not assist braking


it could be that the master cylinder is bad or the brake booster is bad also check the vacum hose going to the brake booster if it has a hole in it it will lose pressure and make the engine lose rpms

Aug 16, 2009 | 2006 Fiat 124

2 Answers

Brakes


sense its a deisel i would go with the vacume pump, diesels don't put out any or very little vacume, if you don't have vacume than booster won't work hense hard peddel. when you say you let up on peddel and hit it again you got better break tells me it is not getting enought vacume to booster. i would go for the vacume pump.

Feb 02, 2009 | 1993 Ford F250

2 Answers

97 ford e350 brake pedal goes to the floor...


are your rear drums set up? why did you bleed the brakes. when only when you installed new pads?

Sep 11, 2008 | 2002 Ford E350

1 Answer

My brake pedal is hard to push in. the car wont/ is hard to stop. i replace the brake pads and the calipers. what could be the problem now?


i guess your brake booster is the problem. try this.... engine not running just pump the brake at least 25 times at the 25 count,just keep your feet on the brake pedal and start the engine. if the brake pedal won't go down even a little... your brake booster is gone. or something with the vacuum.

Jul 28, 2008 | 2004 Dodge Grand Caravan

Not finding what you are looking for?
1993 Nissan Maxima Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...