Question about 1990 Toyota Cressida

1 Answer

My stereo went out, turns on, but no sound. what could be the problem?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Make sure all your settings i.e. balance, fade, volume, etc are set to default, that is in the center. You may have one speaker out and the controls are set to only the speaker.

Posted on Nov 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need help with a battery drain on a 2002 GMC Yukon Denali XL


As odd as this sounds, I would take it to "Car Toys" and have them take a look at the stereo wiring.

Apr 29, 2014 | GMC Yukon Denali Cars & Trucks

1 Answer

Mazda3


Replace it . I have found to repair it costs more than a replacement.

Apr 22, 2014 | 2006 Mazda 3 1.6

1 Answer

Parking lights stay on when car turned off


Check the driver door jam switch , maybe unplug it and see if it cures your battery trouble

Feb 11, 2014 | Oldsmobile Alero Cars & Trucks

1 Answer

So I went to replace the stereo on my 2002 Buick rendezvous and so I sniped a few wires off the stereos, then behind the dash there was a buzzing sound, and then I went to start the car but no luck. I...


No code reset will not allow restart. procedure takes half an hpur with out tech2 scanner. you have to put key in turn it to crank and then leave it in on position for ten minutes turn the key of and repeat two more times.

Nov 15, 2013 | Cars & Trucks

1 Answer

I hooked up a dual radio to my 1987 dodge ram the radio comes on but no sound and the dash lights went out


Sounds like you have the stereo ground wired into the wire that dims the light on the factory stereo when the headlights turn on. Rewire stereo with proper ground, check all other wiring to insure it's done properly,replace blown fuses for lights & stereo. Should be good to go.

Nov 05, 2012 | Cars & Trucks

1 Answer

Radio sound went out


Does your stereo have a manual volume adjustment knob? If so, then try twiddling it quickly from side to side. If this helps, then it could be a poor volume control issue. Try having this professionally cleaned or repaired. If not this issue, then also try removing the stereo and checking the wire connections on the back of it to the speakers. I'm assuming that all the speakers are failing to project sound when the fault occurs, so we are talking power issue here. The fault is most likely part of the stereo head unit.

Oct 30, 2012 | 2003 Chevrolet Suburban

1 Answer

Sound went out in the stereo i was driving and the sound went out in my stock stereo in my 2007 cobalt. the fuses are ok, the stereo light is on. theres just no sound. what can i do?


You might want to check and see if you have somehow lost connection to your speakers. Not familiar with vehicle but I do know stereo's, if the light is on on the Stereo then it should be OK. Check under the dash and around and see if something has come loose going to your speakers. Caution~ DO NOT try to touch another speaker to an existing speaker because if not done properly it will change the speaker resistance and result in a burnt out channel in your stereo.
Gillight

Jul 22, 2012 | Cars & Trucks

1 Answer

Car stereo not receiving power.


Sound system w/o amplifier. Not only check the fuses, check the fuse circuit for voltage, use a test lite. As you can see, one fuse is hot all the time, the other fuse goes hot with the key on. Also check ground wire, that wire color is black.
sound system-pr25lrpcl4hu210hvcj0as1a-5-0.jpg

May 05, 2017 | 2006 Kia Rio

2 Answers

My mini cooper 2003 stereo has no sound it seems to look fine but no sound on the trouble shooting guide it says check the sound switch might be pushed in but where is this switch


never heard of it to be truthful ,like to help but i havent come across this problem ,only thing i can think of is mute button somewhere on the radio facia

Jan 12, 2010 | 2003 Mini Cooper

Not finding what you are looking for?
1990 Toyota Cressida Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...