Question about 2000 Nissan Maxima

1 Answer

WHERE CAN I GET THE EGR VALVE REPLACED - 2000 Nissan Maxima

Posted by on

1 Answer

That is so easy, you do it yourself.
Get at auto parts store

Posted on Oct 01, 2010

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mechanicm639
  • 253 Answers

SOURCE: egr failier,replaced censer and valve what next

Remove the EGR valve and look in the ports in the intake. There is a good chance they are stopped up. Good Luck.

Posted on May 06, 2009

csmock132
  • 4669 Answers

SOURCE: low egr presure

Low pressure? Insufficient egr flow? How about plugged ports in the intake. What engine? Do you have a vacuum pump?

Posted on May 17, 2010

  • 1915 Answers

SOURCE: Have a 2002 Mitsubishi Montero

check owners manual for fuse for emissions devices

Posted on Dec 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 ford escort with a check engine light on and can't get it off


Here is a list of possible causes. Some things you have already done.

EGR solenoid valve harness is open or shorted
- EGR solenoid valve circuit poor electrical connection
- EGR volume control valve stuck closed
- Faulty EGR Pressure sensor
- Faulty EGR temperature sensor and circuit
- Faulty EGR Valve
- EGR passage clogged
- Exhaust gas leaks
Read more: http://engine-codes.com/p0401_ford.html#ixzz28fATCih2

Oct 07, 2012 | 1998 Ford Escort

1 Answer

What does the check engine code p0406 mean on my dodge caravan with a 3.3L engine?


P0406 - Exhaust Gas Recirculation Sensor A Circuit High
An improper voltage signal is sent to ECM through the valve

Early Models : The EGR valve control the amount of exhaust gas routed to the intake manifold. Vacuum is applied to the EGR valve in response to the throttle opening. The vacuum control the movement of the taper valve connected to the vacuum diaphragm in the EGR valve.

zjlimited_279.gif

Late Models : The EGR volume control valve uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECM. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECM does not issue the pulse signal. A certain voltage signal is issued so that the valve remains at that particular opening.

zjlimited_280.gif

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine hesitation

Possible causes
- Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control solenoid valve
- EGR temperature sensor and circuit

Possible solution
- Repair EGR harness or connector
- Replaced EGR volume control solenoid valve
- Replaced EGR volume control valve


Hope helps (remember to rate and comment this answer).

Mar 31, 2011 | Dodge Caravan Cars & Trucks

2 Answers

I have a code P0401. What is this and how can I fix it?


P0401 - Exhaust Gas Recirculation Flow Insufficient Detected

Possible causes - Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control valve stuck closed
- EGR volume control solenoid valve
- Dead (Weak) battery
- EGR passage clogged
- Exhaust gas leaks Possible solution - Clean EGR Valve
- Repair EGR harness or connector
- Replaced EGR volume control solenoid valve
- Replaced EGR volume control valve

Mar 20, 2011 | 1998 Ford Taurus

2 Answers

Engin light #po406 2005 ram quad cab


P0406 - Exhaust Gas Recirculation Sensor A Circuit High

Early Models : The EGR valve control the amount of exhaust gas routed to the intake manifold. Vacuum is applied to the EGR valve in response to the throttle opening. The vacuum control the movement of the taper valve connected to the vacuum diaphragm in the EGR valve.

zjlimited_230.gif

Late Models : The EGR volume control valve uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECM. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECM does not issue the pulse signal. A certain voltage signal is issued so that the valve remains at that particular opening.

zjlimited_231.gif

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine hesitation

Possible causes
- Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control solenoid valve
- EGR temperature sensor and circuit

Possible solution
- Repair EGR harness or connector
- Replaced EGR volume control solenoid valve
- Replaced EGR volume control valve
When is the code detected?
- An improper voltage signal is sent to ECM through the valve


Hope helps.

Mar 06, 2011 | 2005 Dodge Ram

2 Answers

EGR valve is being cleaned due to "Check Engine"


CLEANING THE VALVE WILL NOT RESOLVE THE ISSUE, IT SHOULD BE REPLACED.

Dec 15, 2010 | 2002 Isuzu Trooper

1 Answer

Just replaced EGR hose & valve copver gaskets on 2002 Ford Escape 4WD. Did test drive, runs really rough & almost stops & cuts off. Any ideas?


OK, if you replaced the EGR hose, did you go all the way to change the EGR Valve? A stuck open EGR Valve can cause a rough idle and almost make it cut off.
Also, a vacuum leak on the EGR valve can cause a rough idle.

prev.gif next.gif Exhaust Gas Recirculation (EGR) Valve Removal & Installation 2.0L Zetec Engine NOTE: When the EGR tube is disconnected from the EGR valve, it must be discarded and a new EGR tube must be installed. The aluminum threads on the EGR valve must be inspected, and a new EGR valve installed if the threads are damaged.
To Remove:
  1. Disconnect the negative battery cable.
  2. Remove and discard the exhaust manifold-to-EGR tube. Use the following as a guide:
  3. Raise and safely support the vehicle
  4. Remove the splash shield
  5. Disconnect the EGR tube fitting
  6. Lower the vehicle
  7. Remove the air cleaner outlet pipe
  8. Disconnect the EGR tube from the EGR valve.
  9. Detach the vacuum line and remove the two retainer bolts.
NOTE: The EGR valve sealing surfaces are soft metals and easily damaged.
To Install:
  1. Installation is a reverse of the removal process. Carefully clean all sealing surfaces and install a new EGR valve gasket.
  2. Install a new EGR valve tube.
Detach the vacuum line (#1) and unbolt the EGR valve - 2.0L 02-04_escape_emissions_022.gif

3.0L (4v) Engine To Remove:
  1. Disconnect the vacuum line.
  2. Disconnect the EGR tube.
  3. Remove the EGR valve and discard the gasket.
NOTE: The EGR valve sealing surfaces are soft metals and easily damaged.
To Install:
  1. Installation is a reverse of the removal process. Carefully clean all sealing surfaces and install a new EGR valve gasket.
Detach the vacuum line (#1), unthread the EGR tube (#2) and remove the EGR valve bolts (#3) - 3.0L (4V) 02-04_escape_emissions_023.gif

Aug 02, 2010 | 2002 Ford Escape

1 Answer

Egr failier,replaced censer and valve what next


Remove the EGR valve and look in the ports in the intake. There is a good chance they are stopped up. Good Luck.

May 06, 2009 | GMC Sierra 2500 Cars & Trucks

1 Answer

Matco scanner cod 1404a


Sounds like the EGR sensor is still sending power to the EGR valve. I would replace the EGR sensor and that will resolve your problem. There has been a problem with some of the cars showing a error code reading of EGR valve being bad when it is really the sensor being bad

Apr 08, 2009 | 2001 Oldsmobile Silhouette

1 Answer

Egr valve p0401 showes up and replaced it and


i have 1998 buick century replaced egr check eng light still comes on what can i do

Feb 24, 2009 | 1998 Buick Century

Not finding what you are looking for?
2000 Nissan Maxima Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...