Question about 2000 Acura 3.5RL
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you can locate the temperature switch, looks like a large bolt head with 2 wires on it, bridge the wires on it, and this should make the fan work. If the fan works then this switch is faulty. If the fan doesn't then it could be the fuse, or a broken wire.
The fan switch is either on the radiator or on the thermostat housing.
If you can get to it easy, short across with a screwdriver.
Posted on Apr 27, 2009
Check the fuse for your blower motor if it is OK the Blower Motor may be bad or you may have a loose wire to or from the it have it checked if fuse is good
Posted on Jul 09, 2009
The SRS computer needs to be reset, if you dont have a repair manual i would first suggest finding one for each car. The basic principal is that you jumper the diagnostic plug (under the glove box in the RL). The next step I believe is that you must depress the TCS button, then while holding it down you turn the key to on, continue to hold the TCS button for 15 sec and then let off. The check engine light should then blink really quick a few times and that means its reset. Im reciting this from memory so dont quote me on it. I have done it before for the RL but not the integra, id really suggest finding a repair manual though.
Posted on Sep 19, 2009
the best and safest way to remove this radio is with the special tools that Acura made specifically for removing the radio. Any radio store or best buy can easily remove it for you. I hope this helps please rate this and thank you.
Posted on Mar 05, 2010
THIS IS REAL SIMPLE I HAVE DONE THE SAME THING TO INSTALL THE IPOD INTERFACE MANY TIMES.. STEP 1 MOVE BOTH FRONT SEATS ALL THE WAY UP TO ALLOW U TO HAVE SPACE STEP 2 LOOK UNDER THE SEATS AT THE BASE AND U WILL SEE 2 BUTTON STYLE CLIPPS 1 ON EACH SIDE OF THE SEAT, PLACE YOUR FINGERS ON THE SIDE OF THE BUTTON AND PULL IT TOWARDS YOU,AND AT THE SAME TIME LIFT THE SEAT.. REPEAT THAT STEP FOR BOTH SIDES AND THE SEAT FLIPS RIGHT OUT
Posted on Apr 19, 2010
Tips for a great answer:
Nov 12, 2013 | 1998 GMC Sierra
May 21, 2010 | 2000 Acura 3.5RL
Mar 05, 2010 | 2005 Acura RL
Oct 03, 2009 | 2000 Acura 3.5RL
Jun 03, 2009 | 2000 Acura 3.5RL
145 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: