Question about 2002 Ford Mustang

1 Answer

Oil pan I jacked my car up to the lim it and i can not get the oil pan out. I own a 2002 mustang gt 4.6. I loosened the tail end of the tranny and it still will not come out. i only need about 2 inches more for it to come out. It keeos hitting the dust cover plate on the tranny. any help?

Posted by on

  • Anonymous Jul 06, 2008

    I have a 1997 mustang with a 4.6 engine. I having a problem removing it. I have loosen both motor mounts and the exhaust. Got the engine tilted and and the trans up. I'm a half of inch off. Still can't get the pan off without a engine hoist. Any suggestions before I try with a engine hoist?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 640 Answers

You need to loosen the motor mounts so the pan will clear the exhuast/chassis.

Posted on May 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change the oil pump in a f-150 4.6 2002 model


Ford F150 5.4L Timing Chains and Guides Oil Pan Oil Pump ...

? 5:08
https://www.youtube.com/watch?v=BgvGjfzrRjU
May 10, 2014 - Uploaded by dezertol
Ford F150 5.4L Timing Chains and Guides, Oil Pan, Oil Pump, Cam ... i am looking into changing the oil pump myself... did you try removing the intake ... I need help with my timing for i 3v4.6 mustang gt, im about to take of my ...

Ford 4.6L, 5.4L, 6.8L Engines -Melling Oil Pumps - YouTube




Nov 04, 2015 | Cars & Trucks

2 Answers

How do I get my oil pan down


loosen motor mounts and jack engine up some

Feb 10, 2015 | 2006 Pontiac Grand Prix

1 Answer

How do u remove the oil pan on a 1994 mustang v6


make sure the vehicle is parked on a flat surface. Jack the vehicle up using a floor jack & jack stands. locate the oil pan underneath the vehicle. drain the oil & remove the bolts from the pan.

Feb 24, 2011 | Ford F-150 Cars & Trucks

1 Answer

My 97dodge intrepid is leaking oil and i want to know where is the oil pan?


Hi. You might need to Replace the oil pan gasket is the oil is leaking. Here's the procedure on how to Replace the oil pan gasket.

1. Jack up the front end of the car and slide a jack stand under the vehicle. Make sure the jack stand is securely in place, and then put blocks in front of the rear wheels to keep them from rolling.

2. Slide under the car and put a drain pan under the drain plug of the oil pan. Loosen the drain plug with a socket wrench and allow all of the old oil to drain into the pan. Remove the old oil filter.

3. Disconnect the negative battery cable and remove the dipstick and its housing. Remove the collar on the rear of the oil pan. If the vehicle is equipped with engine oil cooler lines that lead to the oil pan, remove them as well, along with transmission oil cooler clips.

4. Remove the bolts holding the oil pan, and carefully remove the oil pan. Remove the old gasket. Scrape it with a putty knife if necessary, but be very careful not to scratch the surface.

5. Wipe out the oil pan with a clean cloth or paper towel, and wipe the joining surface of the oil pan with cleaning fluid or solvent. Apply a thin bead of automotive sealer and install the new gasket.

6. Replace the oil pan, tightening the bolts securely. Replace the transmission oil cooler clips, engine oil cooler lines, oil pan collar, dipstick housing and dipstick, and reconnect the negative battery cable. Install a new oil filter.

7. Take the car off the jack stand and fill the engine with the appropriate amount of SAE 10W-30 or SAE 5W-30.

All the best!

Nov 09, 2010 | 1997 Dodge Intrepid

2 Answers

How many quarts of oil in 5.0 mustang gt


The 5.0L engine comes with a 5 quart oil pan. I have a 95 mustang and I have a 7 quart oil pan installed on it. If there was a previous owner that has done any work to your car be aware of that. It wasn't until 96 that mustangs came stock with a 6 quart oil pan on the 4.6L engine. I would put 5 quarts in with out worry. start the engine for a bit, shut it back off and check the oil again before taking it out on the road. Do not only put 3 quarts in it and feel safe with it.

Jul 01, 2010 | 1992 Ford Mustang

1 Answer

Do i need to drop the oil pan to ghange the timing cover gasket on a 95 ford mustang v6?


You can pull the motor mounts bolts and jack the motor up alittle, that will give you enough clearance to drop your oil pan. If you try and replace the timing chain cover without dropping the oil pan, you will more than likely wind up with an oil leak.

You should be able to replace the timing cover without removing the oil pan. The gasket set should contain gaskets allowing you to cut the oil pan gasket and put in a new partial gasket in this area. In the corners make sure you use some RTV sealant. If you are careful, it can be done. Like Bob A says you can end up with a oil leak without dropping the pan (unless you clean up the area and properly apply the RTV and gasket). If you have time to drop the oil pan, then I would do that.

Oct 21, 2009 | 1995 Ford Mustang

3 Answers

Engine temperature sensor located on a 1998 Ford Mustang GT


Left hand side (if facing it), behind distributor, above oil fill.

Apr 22, 2009 | 1998 Ford Mustang

1 Answer

Remove oil pan on 2001 f150


i just did an oil pump in my 1990 f350 with 351 i had to undo all my motor mounts on engine and tranny , jack it up enough to drop the pan 4 inchs to remove and install new pump took 6 hours

Apr 09, 2009 | 1990 Ford F150

1 Answer

1990 ford mustang lx 2.3L transmission


they dont have vent tubs they have vent caps and it is on top of trany just infont of tail cone

Nov 03, 2008 | 1990 Ford Mustang

Not finding what you are looking for?
2002 Ford Mustang Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...