Question about 1997 Chevrolet Blazer

2 Answers

None of my lights work interior and out.the running brake lights and liscence platelights arent workin.everythime i put a new fuse inside the interior fuse box the fuse pops or seems to short circut>> do i need a new wiring harnest rewired to the fuse box

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 69 Answers

Its almost deff a hot wire grounding out do not over size your fuse just start at one light check your wires for cracks kinks and bare spots its not fun but you should prob take it to a shop unless u have alot of spare time

Posted on Oct 01, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers

I just fixed this problem on my brother-in-laws lumina. Yours could be experiencing the same. Pull all of the marker lights out of the sockets and leave them hang out. While doing this, check the wires for scuffs or bareness. Then add another fuse. Try the dashlights again, if it stays on... then you have a need for new peanut bulbs for the marker lights. If the fuse blows again, then try pulling the lights on the dashboard (by removing the dashconsole parts, etc. Its a process of elimination. If the marker lights are the culprit, clean the sockets out with a brush before you install new lights.

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Alarm button no workin, whn i press it, lights up bt no sound,


May need a new one then if u already changed battery out

Nov 21, 2014 | 2009 Toyota Corolla

3 Answers

Brake lights stop workin on my 96 villager


Did the problem come on suddenly or was some previous action or work done...

Nov 20, 2011 | Cars & Trucks

1 Answer

Hey what number fuse will it be for my power windows they just quit workin.. the motor still works cause i didnt roll them all the way down and double clicked my unlock button and it went down... but never...


Remove the inner door panel, and you will
most likely find that the window regulator broke

Not the fuse,you said you put window down

Order an owners manual----Helm.Com

Mar 20, 2011 | 2006 Lincoln Zephyr

2 Answers

Interior dash and running lights dont work but my signal and brake lights work else works


Look at fuse #18, a 15 amp fuse, in the fuse block. This fuse powers both the tail lights and instrument cluster lights. Usually both of these light systems are powered by the same fuse so when your cluster isn't lit up you'll know right away that your tail lights aren't working as it's not safe to drive without tail lights. Your brake, turn, and head lamps are powered by different circuits. Hope this helps and good luck!

Aug 11, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Why arent my brake lights not workin?


brake light switch on brake pedal or your bulbs are gone or a fuse

Apr 14, 2010 | 1990 Volvo 740

1 Answer

Horn and brake lights


First if brake lights arent working then the shiftlock wont work. Works off of same circuit. I would check fuses for brake lights and also horn. Not exactly sure on the 92's but good chance theres fuse's inside car and also under hood.

Feb 06, 2010 | 1992 Honda Accord

1 Answer

Where is the fuse for the license platelight located,it is not labeled on the diagram on the cover?


there is not a seperate fuse for the license plate light . If your other runnung lights and parking lights work its not a fuse. Look at the connections inside the light socket they can become corroded or its a broken wire if its not the bulb itself. I assume you have tried more than one. Remember even a new part can be defective.

Nov 15, 2009 | 2006 GMC Yukon

1 Answer

Interior Lights not workin on Dashboard/gear Shift


The problem is probably a blown fuse. Check the owner's manual for location of the fuse panel, find the fuse marked instrument panel (or similar), and put in a new fuse. If the new fuse blows, there is a short which will have to be located and repaired.

Apr 21, 2009 | Toyota Highlander Cars & Trucks

1 Answer

99 Beetle - brake lights and interior temp lights out


there is a possibility that they did check them if they arent then look for a short

Nov 25, 2008 | 2001 Volkswagen Beetle

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...