Question about 2001 Pontiac Grand Am SE

1 Answer

Need to replace driver door window can't get door panel off

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Well its fairly simple first you need to locate screws on door handle usual 2 or 3 under plastic tabs,then remove screw around door handle if there are no more screws on lower part either pry out or lift up

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the driver side door panel on a 1994 Lincoln Mark VIII


Remove mirror mount cover assembly.
Remove inside door handle cup (22634).
Remove door lock control bezel.
Remove window control bezel.
Remove interior lamp lens.
Remove screw from interior lamp assembly body.
Remove screw from window control bezel opening.
Disconnect mirror, lock switches and memory seat on driver side from bezels and wire harness.
Disconnect window switches from window bezel and wire harness.
Lift front door trim panel (23942) vertically, out of weatherstrip and over lock rod.
Disconnect interior lamp (13776) from wire harness.
Remove front and rear door trim retention hooks into door inner panel.
To install, reverse Removal procedure, paying special attention when inserting inner door trim into weatherstrip. Rock inner door trim into weatherstrip and push downward until lower trim belt character ditch lines up with score mark on inner door panel.

Aug 16, 2014 | 1994 Lincoln Mark VIII

1 Answer

Remove and replace drivers side power window switch


I am assuming its the drivers door window you are speaking of....
The drivers door has the master window switch w/lockout. The entire assembly must be replaced. The individual switches on the drivers door can't be replaced by themselves. Some GM vehicles allow the panel with the switch assembly to be removed without removing the door panel. However, most require the door panel to be removed for access to the window switch assembly. The master door/window switch assembly is not cheap, by the way.
I would check/replace the window relay first. Usually located under the dash, or under one of the seats.
Might just be the window motor on the problem window.

Jul 08, 2013 | 2001 Cadillac Eldorado

1 Answer

Driver's side window switch doesn't work.The switch that lowers and raises the driver's side window in my 1998 Toyota Avalon has stopped working. Until last week, it worked sporadically. I think the switch...


i know on some toyotas, you do not need to remove the door panel just the handle where the switch assembly is located...if the panel around the switches is plastic then pry GENTLY up on the plastic to dislodge it from the door handle and inspect connections there...if everything checks out fine, then check fuses...perhaps this was a problem for so long that the window motor finally blew a fuse. if so replace both fuse and motor...if fuses okay, then with a long screw driver locate any screws under the door handle, bottom of the door panel, mirror panel etc, and remove...then gently pry outwards on door panel until it is released. disconnect your harness at the window motor and hook in a test light and operate the switch..if light illuminates, replace motor..if not, then replace switch or switch panel..which ever/.

Nov 13, 2009 | 1998 Toyota Avalon

1 Answer

2002 Cougar passenger side window switch - remove & replace


remove the door panel switch comes off from inside

Jul 23, 2009 | 2002 Mercury Cougar

1 Answer

Replacing passenger side mirror on 2004 Hyundai Elantra.


tools:
philip head screw driver,
flat head screw driver
metric socket std and deep.
rachet metric or 3/8 driver with a adaptor.
socket extension.
lower the windows.
look for small plastic cover on the door handle and door pull, pop the cover with a samll flat head screw and loosen the screws with philip head screw driver.
pull the in side panel from the button of the door panel with the help of screw driver and along the sides.
push the inside panel up wards to clear the glass. and disconnect any of the electric wiring. and left the panel out of the way.
take the window switch from the door pnael and roll up the windows.
peel down th inside water seal.
you should be able to get to the mounting screws for the mirror.

May 13, 2009 | 2004 Hyundai Elantra

1 Answer

Driver side window is off track and stuck about 75% closed


If your power window motor is not moving up or down at all inside the door panel, you will need a new motor.
If your window is stuck and will not move, it is the motor - it is bad.
If your window falls down into the door panel, the window is off track.
Replacing a window motor is an easy fix, get another one from an auto parts store and replace it.
Good luck!

Mar 12, 2009 | 1993 Honda Accord

1 Answer

95 blazer, front driver window motor broken need to get window up


When removing the door panel, you need to remove all of the screws first. Then pull the door panel off. There should be screws around the edges or the door panel, and 1-2 screw on the door handle(on the inside). Then pop the door panel off, if the blazer has electric windows and locks you have to disconect them first, if it doesnt have power locks and windows, you have to take the window crank off,there should be a screw in the center of that. Unscrew the door lock and pull up. If it doesnt have them locks then you have to disconect it from inside the door panel

Nov 30, 2008 | 1995 Chevrolet Blazer

1 Answer

All of a sudden the driver side window will not roll up.


is it electric windows? if it has electric windows does the passenger window roll up using the switch for it on the passenger door panel? if it works on the passenger door panel and not on the driver's door panel , then your switch on the drivers door panel is bad... replace it.

Oct 13, 2008 | 1999 Oldsmobile Cutlass

2 Answers

1990 buick centruty, driver door schematic (window regulator)


The first thing you need to do before buying any parts is to remove the door panel and find out exactly what is wrong, the motor is a gear reduction unit and even if the motor works it may still not drive the output gear. The door panel is held on by screws and hidden clips, pop off any panels or light fixtures on the door trim, under those you will find the hidden retainer screws, then gently pull door panel at edges to disengage feather style snaps.

Aug 26, 2008 | 1990 Buick Century

Not finding what you are looking for?
2001 Pontiac Grand Am SE Logo

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...