Question about 2000 Daewoo Nubira

1 Answer

My car seems to heat up after driving along for about 10to15mins. The gauge will go to H then work its way back down to normal>

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,074 Answers

May need radiator flushed and new thermostat installed, or the sensor for the thermostat is going bad

Posted on Sep 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Temperature gauge cold then back to normal


You have to make sure the thermostat is working properly and is the correct one. Idle the vehicle for about 20 minutes and then feel the upper radiator hose. It should be hot to the touch. Drive the vehicle and when the temp gauge falls to 'cold' stop and feel it again. If it is much cooler to the touch than before the thermostat is defective or wrong.

Mar 23, 2014 | 2000 Ford Ranger SuperCab

1 Answer

I have a automatic 1999 pontiac grand am gt. the car and drives good until it heats up. then the gears shift extremely hard. and when sitting in idle you can hear a loud winding noise coming from my...


Check the transmission fluid level. Also check the rear differential if your car has one ( I think the 99's were still rear wheel drive) for fluid. If either of these are low, the fact that things are fine indicates that the low fluid level is causing problems. Also, the trans fluid should be a nice pink color. If it isn't then the transmission is not in good shape and should be looked at again by the rebuilder. If the fluid levels are fine, have the rebuilder check the trans again to see if he missed something.

The issue with the temp gauge is entirely separate except if you mean that the car begins to heat up when the shifting problems are occurring. If the temp gauge goes way up then comes down quickly regardless of how the car is being driven, the thermostat may be sticking and should be replaced. If the car is hard to drive and then starts overheating, the transmission may well be defective and causing the engine to work harder than it should.

Apr 01, 2017 | 1999 Pontiac Grand Am GT

2 Answers

Heat not blowing hot air and car temp gauge goes high


the way to check the thermostat is with the motor hot feel the upper radiator hose to see if can squeeze it. you should be able to squeeze it. the water pumps is big problem to

Jan 26, 2013 | Chrysler Cars & Trucks

1 Answer

Honda 98 CRV temperature gauge goes way up after an hour on hwy


You will need to change your thermostat as it is stuck and is not responding correctly to temperature changes. Have your mechanic change the thermo, do a flush of the system and all should be good again.

Oct 06, 2009 | 2001 Suzuki Grand Vitara

1 Answer

1996 Cutlass Supreme-Temp shows hot even after engine rebuilt


is the temp gauge sender new
or the engine cooling fans spinning fast enough
air in the heating pipes ? bleeding

Feb 28, 2017 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Head gasket/ timing etc


Not 100% sure on that engine, but I'd be looking at my timing chain & gears, especially if gears have nylon teeth. Pull covers & have a look at condition & positioning for correct. Other thing I'd check is distributor & especially gear at end of shaft. If metal gear at bottom, you should be o.k.,but if nylon,could have melted.heated & distorted or broke. Be sure to mark it for re-install & don't crank engine before re-install.

Feb 23, 2009 | 2000 Pontiac Grand Am GT

2 Answers

I have a 2000 Daewoo Leganza. When I first bought it, there was no heat in car, temperature guage was blowing sky high and shutting down engine. It was discovered that there was engine problems, so that...


You have air in the cooling system, it needs bleeding, this is best done from the heater hoses. you cannot have a heating or cooling sysem that is not pressurised. no water no heater no demister no temp guage

Jan 17, 2009 | 2000 Daewoo Leganza

1 Answer

1996 engine coolant problem


you can open the radiator cap before starting your engine and let it worms up and you can see by looking in to the rad if you have circulation maybe you will have to rev engine just a little if the new thermostat work it will circulate godd and check to make sure fan does come on new sensors but fan may be the problem be cautious as it gets hot . and also make sure there is no air in the system with the cap off and little rev if air is present it should come out good luck

Jul 03, 2008 | 1997 Toyota Celica

Not finding what you are looking for?
2000 Daewoo Nubira Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

79024 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...