Question about 2008 Chevrolet Equinox

1 Answer

I have the blank key cut for my 2007 Equinox, how do I program it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

Hello and welcome. this is how you learn a new key. please note this is for adding a new key. you must still have one working key for this to work.

Adding Keys Important: • To initiate, this procedures requires that a learned master key be available. • A total of 10 keys may be programmed to a single vehicle. • This procedure adds keys only. The procedure does not erase previously learned keys. • The keys to be learned must duplicate the mechanical cut of the current key. • If more than one valet key is to be learned, immediately precede each valet key with a learned master key.

  1. With a previously learned master key, turn ON the ignition, with the engine OFF.
  2. Turn OFF the ignition and remove the key.
  3. Within 10 seconds of turning OFF the ignition, insert the key to be learned and turn ON the ignition. The vehicle has now learned the new key.

Posted on Sep 30, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22156 Answers

SOURCE: Can I using a blank

no just looked in my alldata book and no toyota from 2007 can be programmed without the dealer diagnostic machine ,so i hope your pocket is nice and long

Posted on Nov 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to find how to program a transponder key on a 2007 Chevrolet Equinox , VIN starts with a 2


This 30-minute learn procedure should be used when all vehicle keys are desired to be replaced or reprogrammed. This procedure will erase all previously learned vehicle keys from the TDM. Once the 30-minute learn procedure has been completed, any remaining vehicle keys may be programmed using the Adding Keys procedure to ensure their continued functionality.
  1. With an unlearned master vehicle key, turn ON the ignition, with the engine OFF.
  2. Observe the security indicator, after approximately 10 minutes the telltale will turn off.
  3. Turn OFF the ignition, and wait 5 seconds.
  4. Repeat steps 1-3 two more times for a total of 3 cycles or 30 minutes.
  5. Important: The TDM learns the key transponder information upon the ignition switch transition from OFF to ON. You must turn the ignition OFF before attempting to start the vehicle.
  6. With a master vehicle key, start the vehicle. The vehicle has now learned the key transponder information.
  7. If additional keys are required to be learned, refer to Adding Keys.
  8. With a scan tool, clear any DTCs.

Mar 13, 2016 | 2007 Chevrolet Chevrolet Equinox LT

1 Answer

I have a 2007 equinox and anti theft is on key is stuck in ignition


Sounds like the lock cylinder has broken internally .. tumbler fallen down trapping the key .. your key may also be a security style key and can't be read by that lock cylinder due to breakage .. They are very sensitive ...

Feb 11, 2015 | 2007 Chevrolet Equinox

1 Answer

Can't program replacement key because of security alarm


take the car to a service dealer as they have the correct equipment to do this.

Nov 09, 2013 | 2007 Chevrolet Equinox

1 Answer

Had only 1 key and broke it however walmart was able to cut a new one but need to no how to program it


I have a 2007 Lincoln Navigator...
Less than 1 hour ago (4:00pm pacific time) I had a key made AND programed at my local Walmart (over in the auto department). It cost me $54.00 and took all of 15 minutes from beginning to end. The key works perfectly - no problems...
They have a machine that reads the code on your original key - then they insert the new key blank and your original code is programed into the new key - THEN they cut the key and you are out of the door.

Feb 19, 2012 | Cars & Trucks

1 Answer

Where is the fuel cut off switch on a 2007 Chevy equinox


Inertia Fuel Shut Off Switch

They have only been on Ford products

So that isn't your problem

Care to share the symptoms?

Sep 24, 2011 | 2007 Chevrolet Equinox LS New Cars

1 Answer

Hi can u tell me how to code the key on a 2007 kia grand carnival as i lost my keys i have got a new key and had it cut to suite the car but it will not start car can u help


you have to get a new coded blank from a dealer, they cut it for you. a normal blank will not work right in the ignition. take proof of ownership

May 25, 2011 | 2007 Kia Spectra LX Sedan

3 Answers

How do you reset anti theft on a 2007 equinox


TURN ON IGNITION SWITCH TO ON POSITION.ENGINE OFF.REPEATEDLY PRESS VECHICLE INFORMATION BUTTON UNTIL PRESS TO RELEARN REMOTE KEY IS DISPLAYED.PRESS SET RESET BUTTON UNTIL REMOTE KEY LEARNING ACTIVE IS DISPLAYED. IF THAT PROCEDURE DONT WORK.INSERT MASTER KEY INTO IGNITION SWITCH.NOW SWITCH IGNITION ON SWITCH IGNITION OFF.REMOVE MASTER KEY.WITHIN 10 SECONDS INSERT NEW KEY.SWITCH IGNITION ON.ENSURE SYSTEM WARNING LAMP SWITCHES OFF.NEW KEY NOW PROGRAMMED.IF YOU STILL HAVING PROBLEM RESETING THEFT SECURITY SYSTEM THE DEALERSHIP HAS TO FIX.REPROGRAM IT.

Mar 14, 2011 | 2007 Chevrolet Equinox LS New Cars

1 Answer

Can I using a blank transponder key to copy a 2007 Toyota Camry Key? How much is it to program and cut a transponder key? Thank you!


no just looked in my alldata book and no toyota from 2007 can be programmed without the dealer diagnostic machine ,so i hope your pocket is nice and long

Nov 24, 2010 | 2007 Toyota Camry

2 Answers

Traction control button 2007 ls equinox


its controls wheel spin for ur all wheel or two wheel nox if the wheels start to spin it limits [cuts down the power from engine] the power to the wheels

Apr 19, 2010 | 2007 Chevrolet Equinox LS New Cars

Not finding what you are looking for?
Cars & Trucks Logo

856 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...