Question about 2000 Pontiac Grand Am GT

1 Answer

How to turn change oil light - 2000 Pontiac Grand Am GT

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

II you mean 'how to turn change oil light off" go to fuse panel. Open drivers door there is a panel cover on the side of dash board, remove cover there is a red RESET button that resets oil pressure and tire pressure. Turn the ignition key to the on position but don't start the car. Now press and release the reset button the change oil light should start to flash, now press and hold the reset button until you hear chimming hold until chimming stops then release, the change oil light should go off. If you need to reset tire pressure press reset button twice, the first push will make the change oil light flash the second press will make the tire pressure light flash then hold untill chimming stops, light should go out . Hope this helps.

Posted on Sep 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i turn off the change oil light after the oil is changed?


You don't need to do anything to turn off the light, it's not a change-oil light, but low-oil level light. Check whether the oil level is according to specification, if it is, then the floating sensor might be broken.

Oct 26, 2014 | 2003 Oldsmobile Alero

7 Answers

How do I rest oil change light on a 2001 1500 silveradeo?


Place a piece of black electrical tape over it ,problem solved .you know the oil is good

Oct 10, 2014 | 2001 Chevrolet Silverado 1500

2 Answers

How do i reset the oil change light in a 2003 olds alero


turn key on (dont start engine) floor gas pedal 3 times 1,2,3. turn key off, now start engine it should go off, if not try it again.

Aug 03, 2011 | 2003 Oldsmobile Alero

1 Answer

Blinking oil light on 2003 Mazda Protege. Changed oil and oil filter as well as oil sensor. Light still blinks when the car is idled up.


You need to reset your change oil warning light. To do this, turn the ignition key to on but do not turn over the engine. Then rapidly push down the gas pedal three times. This will reset the system and turn off the blinking light. Then when you drive another 3000 miles, that light will once again tell you it is time to have your oil changed. J.

Jun 20, 2010 | 2002 Mazda Protege

4 Answers

Oil light stays on


You need to put the key on and push the gas pedal to the floor three times within five second to reset the oil life light.Some g.m.'s have a reset buttom in the fuse panel that needs to be pushed first and some don't.Check the owners manual under change oil for your specific year car.

Oct 21, 2009 | 2003 Chevrolet Impala

3 Answers

Change oil light came on


In your owners manual there is a procedure listed for resetting thr oil change reminder/maintenance light. Some vehicles you turn key on..do not start it.. step on gas pedal all the way to the floor 3 times... then key off. others haver u hold the trip odometer reset button when u turn key on.
It varies from manufacture to manufacturer.

Jul 10, 2009 | 2006 Isuzu Ascender

1 Answer

Want to turn off warning lights on dashboard


Change oil light: remove the driver side fuse cover, there is a reset switch. turn key to on position (engine NOT running), press and release reset button. change oil light will flash. press and HOLD reset button again until you hear chimes and the change oil light goes out. it is now reset.
as for the trac off light, there is a button on the dash which turns the traction control on and off

Jun 02, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Change oil light reset?


Hi Shady, here is the procedure for resetting the light.
Resetting Procedure
Follow this procedure to reset the GM Oil Life System™
  1. Turn the ignition to RUN, with the engine off.
  2. Fully press and release the accelerator pedal three times within five seconds.
  3. If the CHANGE OIL SOON light flashes, the system is resetting.
  4. Turn the key to OFF after the light has finished flashing, then start the vehicle.
  5. If the CHANGE OIL SOON light comes back on, the engine oil life system did not reset. Repeat the procedure.
With Trip Computer
  1. Press the MODE button until the light appears next to OIL LIFE.
  2. Press and hold the RESET button for three seconds. The oil life percentage should change to 100 percent.

Nov 02, 2008 | 2002 Pontiac Grand Prix

5 Answers

Check Oil light stays on even after the oil has been changed


well, it is in the manual under engine oil. turn key to on, dont start. press gas pedel to the floor "slowly" 3 times within 5 seconds. if the change oil light flashes, its resetting. If not, repeat.. this worked for me.

Jul 02, 2008 | 1998 Oldsmobile Intrigue

Not finding what you are looking for?
2000 Pontiac Grand Am GT Logo

496 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...