Question about 2001 Chevrolet Silverado 1500

1 Answer

How da you loosen the alternator belt on a 2001 silvarato

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 5,332 Answers

The tensioner is on the passenger side of the motor. If you push on the belt firmly you will see it move. You will need either a 15mm box end wrench or a socket with a ratchet. Place your tool of choice on the center bolt on the pulley and rotate it clockwise. if the belt doesn't loosen up rotate it counter clockwise (i'm drawing a blank right know).

Make sure you notate how the belt is routed before you take it off so you know how the new one goes in.

Posted on Sep 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace alternator on 2001 olds aroura


Disconnect battery (always neg pole/post first)
find alternator, loosen belt.
disconnect wiring @ alternator.
take alternator off.
put alternator in place of it
put belt on tighten all screws, belt tension screw first.

Jan 13, 2015 | 2001 Oldsmobile Aurora

1 Answer

I am trying to change my 2001 Mitsubishi Mirage (w/ ac) alternator belt. I loosened the tensioner, took out the top - bottom and inside bolt of the ac compressor to take off the first belt and even took...


BEFORE ADJUSTING THE ALTERNATOR BELT DISCONNECT THE NEGATIVE BATTERY CABLE OR YOU MIGHT BLOW AN EXPENSIVE HIDDEN FUSE.
I would replace the steering pump belt at the same time you do the alternator belt (buy both).
To take off the alternator belt .
First , take off the negative battery cable so you do not blow an expensive fuse on the positive battery cable clamp(or a block fuse under the hood). Facing the back of the automobile , reach UNDER the alternator and loosen the bolt on the bottom right side, now loosen the bolt on the adjuster block on top, you can now turn the adjuster bolt and move the alternator to change the belt.
To take off the steering pump belt on the front of the motor, you need to loosen the nut on the back side of the pulley (right side of pump mount), the nut holds the adjuster pulley in place . With the adjuster pulley nut loose , you can use the adjuster bolt to move the pulley to adjust/take off the steering pump belt.

Jun 04, 2011 | 2001 Mitsubishi Mirage

2 Answers

Replacing a alternator belt on a 2002 kia spectra.... another belt in the way cant find what loosens the belt


Please let me know if you have questions, and thanks for using FixYa.

1.8L Engine
A/C Compressor-Power Steering Pump Belt


NOTE Refer to the accompanying illustration for bolt and nut locations.

  1. Loosen bolt A , nut B and nut C
  2. Loosen tension adjusting bolt D
  3. Remove the drive belt

To install:

Route the belt over the pulleys.
jturcotte_1369.gif

Fig. Removing the A/C and P/S pump belt-1.8L engine


  1. Tighten bolt A and nuts B and C, as follows:
    1. Bolt A: 27-39 ft. lbs. (37-53 Nm)
    2. Nut B: 14-19 ft. lbs. (19-25 Nm)
    3. Nut C: 24-34 ft. lbs. (32-46 Nm)

  2. Check the belt tension and adjust as necessary.

Alternator Belt
  1. Remove the A/C and power steering pump belt, if equipped.
  2. Loosen the alternator mounting bolt and adjusting bolt.
  3. Remove the alternator belt.
jturcotte_1370.gif

Fig. Alternator belt-1.8L engine



To install:

  1. Install the alternator belt and adjust, as outlined earlier.
  2. Tighten the bolts, as follows:
    1. Mounting bolt: 27-38 ft. lbs. (37-52 Nm)
    2. Adjusting bolt: 14-18 ft. lbs. (19-26 Nm)

  3. Install the A/C and power steering pump belt, if equipped.
  4. Check the belt tension and adjust as necessary.

Mar 30, 2011 | 2001 Kia Spectra

1 Answer

How do you change an alternator belt on a 2001 mazda protege


1.6L (Zm) Engine Refer to the illustration for component location.
  1. Loosen mounting bolts A, B and C.
  2. Loosen the adjusting bolt D and remove the belt.
To install:
  1. Installation is the reverse of removal.
  2. Tighten mounting bolts A, B and C.
02f37a2.gif

Location of the alternator mounting bolts and adjuster bolt D–Protégé 1.6L (ZM) engine


2.0L (Fs) Engine Refer to the illustration for component location.
  1. Loosen mounting bolt A and B.
  2. Loosen the adjusting bolt C and remove the belt.
To install:
  1. Installation is the reverse of removal.
  2. Adjust the belt deflection or tension by turning the adjusting bolt C.
  3. Tighten mounting bolt A and B.
946fb62.gif
Alternator belt tension adjuster bolt (C)–Protégé 2.0 L (FS) engine

Nov 01, 2009 | 2001 Mazda Protege

1 Answer

Sequence for taking alternator off a Volkswagen


dissconnect battery,remove wiring from back of alt,loosen drive belt,undo alternator bolts to remove and just do reverse order to fit,adjust alt belt carefully not too tight not too loose,eg;about a few mm of deflection in the belt

Oct 03, 2009 | 2001 Volkswagen Beetle

2 Answers

I am changing out the altanator on 2001 voyager,


there is a idle pully tensioner that you have to loosen enough until you can take the belt off

Aug 26, 2009 | 2001 Chrysler Voyager

1 Answer

How to change a alternator belt on a 2001 Echo


  1. Loosen the pivot bolt THE BOLT THATS ON THE ALTERNATOR BRACKET ON TOP
  2. Loosen the drive belt tension by turning adjusting bolt and remove the drive belt.
  3. Install the drive belt.
  4. Apply drive belt tension by turning adjusting bolt.
VERY SIMPLE TO DO HOPE THIS HELPS

Mar 28, 2009 | 2001 Toyota Echo

1 Answer

I have a 2001 nissan sentra and it needs a new alternator. i can't figure out how to get the last bolt out. do i have to remove the fan? also, i need pointers on getting the belt back on tightly. thanks....


  • Disconnect and label the wiring harness connections to the alternator (Painters Masking tape works very well for labeling Automotive wiring).
  • Loosen the alternator pivot bolt.
  • Remove the bolt that attaches the alternator to the adjustment arm.
  • Rotate the alternator to loosen the drive belt and disengage the belt from the pulley. Be careful that any spacers that are used in mounting are kept with their original bolts. This will make correct reinstallation much easier.
  • While supporting the alternator remove the pivot bolt.
  • Remove the alternator from the vehicle.
To reinstall the alternator, reverse the removal procedure.
To adjust the belt tension, leave the pivot and adjusting arms loose. Look up the belt tension specification for the vehicle you are working on. Using a belt tension gauge on the belt apply pressure to the alternator until the correct belt tension registers on the gauge and tighten the mounting and adjustment bolts to the specified torque specification.
CAUTION Over tightening of the alternator drive belt will cause the unit to whine and premature failure of the alternator drive end bearing, the water pump or the engine crankshaft.

Jan 12, 2009 | 2001 Nissan Sentra

1 Answer

Replace belt on 2001 toyota echo


that belt is wrapped around the alternator which is located on the passenger side of the engine compartment. loosen the alternator to remove belt. Wrap belt around pulleys and pull the belt tight but adjusting the alternator.

Jan 10, 2009 | 2001 Toyota Echo

1 Answer

Instructions


Just did mine today.....Jack up the front as high as possible, remove front passenger wheel, put jackstands under car so it doesn't come down on you, remove the plastic inside fender well by taking out the 2 bolts and 3 plastic toggles, you need to remove the alternator belt to get to the power steering belt so loosen the center nut on the idler pulley/tensioner and then loosen the idler using the bottom nut/bolt to take the tension off the belt, remove the alternator belt first drawing a picture of how the belt is routed on all the pulleys for reassembly. Now loosen the 2 face nuts/bolts on the power steering belt idler pulley/tensioner and then use the nut/bolt on it's bottom to take the tesion off the belt and then remove the belt. Reinstall the belt and reverse everything to get it back together. Put on a new alternator belt on while your at it.

Jul 22, 2008 | 2001 Mitsubishi Diamante

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...