Question about Nissan Sentra

1 Answer

My headlights keep flickering on and off on normal beams only. Could this be a ground wire problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 343 Answers

It could but if the high beams don't I feel it's unlikely. From my experience, check for corrosion on the back of the headlights and wiring harness. I have found in many cases this to be a worn out HI-LOW switch assembly on the steering column, wiggle the arm with low on and see if that makes any difference. Also check the electrical relay that the switch operates.

Posted on Sep 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep cherokee headlights flicker flash


Best guess is the Hd. Lt. Relay.
Probably will have to be replaced.

Apr 02, 2014 | 1993 Jeep Grand Cherokee

2 Answers

My durango headlight will not work on the right side


Well the turn signals are a different circuit.
Usually the common problem with one headlight is the ground circuit.
Both the high and low beam use the same ground. I would check for power for each circuit and a good ground at the light socket.

Dec 04, 2012 | 2002 Dodge Durango

1 Answer

94 dodge dakota healdights turn on and off while driving


make sure they are canected tight and look for the short or ground you got the right idea now fix before people pull over for you thinking your a cop

Dec 02, 2012 | Cars & Trucks

1 Answer

The low beams in my 1996 dodge dakota flicker on and off but my high beams work fine


have you tried another headlight switch?another thing to check are the grounds and the headlight sockets.turn the headlights on and move wires around.you would be surprised at thing you do an old fashion wiggle test.i'm a 25+ year automotive diagnostic and smog tech.

Oct 07, 2012 | 1993 Dodge Dakota

1 Answer

Headlights not working properly on 1995 firebird


First check harnesses ground connectiosn and wires.

Hope helps.

Feb 07, 2012 | 1995 Pontiac Firebird

2 Answers

Ok I have seen tons of posts about this issue with the Pontiac Sunfire, but no clear solution. I have a 2001 Sunfire the yesterday the Day Running Lights quit working. My passenger side head light will...


First check the R/S headlight fuse in the dash fuse panel (left side), second make sure the R/S low beam headlight bulb filament isn't blown, both these scenarios will do what you are saying. The DRL's work when both low beam lights are in series, thus only 6v going to each bulb at reduced brilliance. The high beam is a totally separate circuit controlled by the multifunction switch. The DRL relay is controlled by the Body Control Module, grounded there, and it will also illuminate the service vehicle soon light. It could also be a bad ground at G204. Its on the steering column support bracket.

Apr 08, 2011 | 2001 Pontiac Sunfire

1 Answer

Have headlight problem 2002 chevy malibu v-6 on the dim side have electria current on both wires to the blub bright beams function normal


if you have power to both headlight plugs for each low and high beam filaments and the ground is good as you say the high beams function normally then you either have bad low beam bulb filaments,poor or dirty connection or you have a daytime running headlight relay on the car and that is the problem with the low beam lights.yes the high beams will work but not low beams if it is the relay.

Mar 04, 2011 | 2002 Chevrolet Malibu

1 Answer

Low Beam Drivers Side doesn't work ... low voltage,


Power for the headlights on the Left side (High and low beam.) comes from the same fuse... The ORANGE wire and the ORANGE/BLACK are the same, they connect in the harness. If you only lack the 12v to make the light work connect them at the headlight assembly.

If your low beam also lacks ground the Left low beam ground is shared with the right low beam ground... Run a wire from left low beam DARK BLUE to right low beam DARK BLUE/WHITE.

If its not working now then your cursed, seek a witch doctor.

May 23, 2010 | 2004 Buick Regal

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...