Question about 2000 Chevrolet Silverado

Open Question

2002 chevy pu tow haul light not working where do I find fuse

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: tow/haul does not work on 2000 chevy truck. whereis fuse?

I had a problem with my tow/haul button not working. I came to find out that the gear shift had cut the wire running to the button in two. You may want to check that.

Posted on May 06, 2009

  • 2 Answers

SOURCE: tow haul light on sierra 2002 wont come on

I'v heard that the tilt wheel causes the wire to break. Most likely the wire has been broken. Somewhat easy fix.

Posted on Jul 05, 2009

  • 1 Answer

SOURCE: chevy truck 2002

check all of the fuses and u have 3 compartments 1 is under dash 2 is on side of dash and 3 is under hood

Posted on Jul 10, 2009

brandon_m618
  • 63 Answers

SOURCE: my chevy silverado 2000 tow haul wont work, light

check all your fuses. If your lucky you might find one the is blown and could be related If not fuse related then you need to remove the platic steering column cover. Under there at the end of the shift lever you will find two small wires that are for the tow haul button. These wires get brittle and break over time from shift level movement it seems. You will have to repair the broken wire and you should be good to go!

Posted on May 01, 2010

  • 1 Answer

SOURCE: chevy 2000 silverado tow haul wont work

I had that problem yesterday and researched the web. Found out underneath the steering column, take the bottom plastic cover off, there is a orange wire for the tow/haul. It's actually 2 white wires with orange covering. It was broke.
Splice the two wires back together and it works great...

Posted on May 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Chevy express 2500 instrument panel lights stopped working after two wires touched going to tow switch. No blown fuses


Which I/P lights ? Instrument cluster , radio , HVAC control panel etc.... All the I/P light's are controlled by the BCM - body control module . Do you know about electronic control modules ?
DTC B2610 Passenger Compartment Dimming 1 Circuit
The body control module (BCM) receives a variable voltage signal from the instrument panel (I/P) dimmer switch requesting to illuminate the instrument panel controls illumination lamps to a desired intensity. When this occurs, the BCM directly sends a variable voltage based on the I/P dimmer switch position on the backlight lamps control circuit, instrument panel lamps dimming control circuit, and the LED dimming signal circuit.
Voltage for the backlight lamps control circuit, instrument panel lamps dimming control circuit, and the LED dimming signal circuits is from the TBC 3 fuse 16 in the underhood fuse block directly through the BCM to these circuits.

• Perform a visual inspection for loose or poor connections at all related components. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems.
• A short to ground in the following circuits will cause the TBC 3 fuse to open:
- The backlight lamps control
- The instrument panel lamps dimming control
- The LED dimming signal
- Battery positive voltage from the underhood fuse block TBC 3 fuse
• An open in the TBC 3 fuse will cause the BCM to set the following DTC:
- B0951
- B2610
- B2625

DTC B2615 Passenger Compartment Dimming 2 Circuit
DTC B2620 Display Dimming Pulse Width Modulation (PWM) Input Circuit
DTC B2625 Display Dimming Pulse Width Modulation (PWM) Output Circuit
Do you know how to Test for a high resistance, an open, a short to ground, or a short to voltage in the following circuits. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
• 5-volt reference
• The dimming input
• The dimming return

Tow/Haul mode enables the operator to achieve enhanced shift performance when towing or hauling a load. When tow/haul mode is selected, the tow/haul switch input signal to the body control module (BCM) is momentarily toggled to zero volts. This signals the powertrain control module (PCM) or transmission control module (TCM) to extend the length of time between upshifts and increase transmission line pressure. Cycling the tow/haul switch again disables tow/haul mode and returns the transmission to a normal shift pattern.

After reading all the pertinent info. to your problem, doing testing ,Checking for DTC'S -diagnostic trouble codes in the BCM , checking power and ground's for the BCM an checking voltage at the tow / haul switch to and from the BCM .is where i would start . Do you know how to do electrical testing ? Read a wire diagram ? If not there are videos on youtube for learning how to do basic automotive electrical testing , how to read wiring diagrams etc... You can find free wiring diagrams at
http://www.bbbind.com/free_tsb.html The only thing with this is you don't have info. saying where componet location's are . This is were factory service info would be helpful

Jan 04, 2017 | Cars & Trucks

1 Answer

I have a 2002 chevy silverado and the tow/haul light comes on and engages on its own. is there a simple fix?


switch is bad, they get dirt and grim in them and will stick. try unpuging it. pull switch out and unpug it, if it still happens with it unplugged, see dealer

Jan 26, 2013 | 2002 Chevrolet Silverado

1 Answer

Fuse for the Tow Haul switch


No, the switch is powered from the transmission, and if the had no power, you would not move. If the light is not coming on, then there is something wrong, like you are in S instead of D.

Oct 30, 2012 | Chevrolet Cars & Trucks

1 Answer

My 2002 chevy silverado tow haul mode is now working. The light doesn't come on and the overdrive stays on


You either have a bad switch or the wires have lost contact.
The tow/haul switch is part of the shift lever and is not replaceable without changing the shift lever. The electrical connector is located inside the steering column covers. These wires have been known to part.

Jul 05, 2010 | Cars & Trucks

1 Answer

My chevy silverado 2000 tow haul wont work, light wont come on at all


check all your fuses. If your lucky you might find one the is blown and could be related If not fuse related then you need to remove the platic steering column cover. Under there at the end of the shift lever you will find two small wires that are for the tow haul button. These wires get brittle and break over time from shift level movement it seems. You will have to repair the broken wire and you should be good to go!

May 01, 2010 | 2000 Chevrolet Silverado

2 Answers

NO TOW HAUL NO POWER TO SWITCH,NO POWER AT BOX UNDER DASH WHERE IT GOES INTO A HARNESS.LITE COMES ON IF POWER SUPPLIED.NO FUSE,NO RELAY????NO CODES PRESENT.SHOULD I REPLACE THE SHIFTER WITH THE BUTTON IN...


tow haul mode will not work on my 2005 chevy silverado, the light will not come on or anything and i tried pushing it while driving and the tranny still shifted the same..

Jul 15, 2009 | 2005 Chevrolet Silverado

3 Answers

Tow haul light on sierra 2002 wont come on


I'v heard that the tilt wheel causes the wire to break. Most likely the wire has been broken. Somewhat easy fix.

Jun 24, 2009 | 2000 GMC Sierra

4 Answers

Tow/haul does not work on 2000 chevy truck. whereis fuse?


I had a problem with my tow/haul button not working. I came to find out that the gear shift had cut the wire running to the button in two. You may want to check that.

May 05, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Chevy truck 2002


check all of the fuses and u have 3 compartments 1 is under dash 2 is on side of dash and 3 is under hood

May 15, 2008 | 1999 Chevrolet C1500

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...