Question about Toyota Corolla
The steps to replace the brake light bulb on a 1996 Toyota Corolla:
The bulb needed is type 1157. After opening the trunk you need to remove the trunk liner on the side (right side for this example)where the brake light bulb is out. The plastic capture grommets hold the liner in place. Once the grommets are removed there is a nut (10mm) that is a bright brass-like color. This needs to be removed. Then on the outside of the trunk on the tail-light lens left side there are two nuts black in color (10mm) they need to be removed. Now the fun starts .... you needto slide the whole assembly back. You will note two black plastic posts on the rear quarter-panel, do not remove these ... these are used to hold the tail-light assembly in place since on the inside of the tail light assembly there are two rod-like protrusions that slide into these brackets. So.... remove the screws and wiggle the assembly back and it "should" slide back so that you can get at the bulb socket hat you twist to remove from the assembly. Now the bulb is visible and you reverse the order of steps to get it all back together .... a miserable design!
Posted on Sep 30, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 16, 2014 | 1996 Toyota Corolla
Jul 06, 2014 | 1993 Toyota Corolla
Sep 13, 2010 | 1996 Toyota Corolla
Jul 27, 2010 | 1996 Toyota Corolla
Jul 26, 2009 | 1999 Toyota Corolla
Nov 04, 2008 | 1996 Toyota Corolla
248 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: