Question about 2002 Cadillac Seville
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Change Brake Pads Light are
there is a wire attached to the brake pads , if your careful you can take it off the oem pads and replace it on the oem replacement pads bought through a auto parts store.this wire sends the signal to the cars computer.
Posted on Oct 28, 2008
you need to bleed all four corners and when doing so use a hose from the bleeder valve into a clear jar half full of brake fluid. Keep The Hose Under The Level Or Air Will Get Back Into The System.
When Bleeding Close The Valve And Have Someone Push The Brake Pedal 1,2,3 Hold Then While The Person Is Still Holding The Brake Slightly Open The Valve Then Keep Doing It Until You Don't Even Get A Bubble. Do This On All 4 Wheels And You'll Be Good To Go.
The More Air That Comes Out The Harder The Pedal Will Get. Make Sure To Keep Filling The Reservoir Cause If It Empty's You'll Have To Start All Over.
Posted on Jan 21, 2009
you need to have a pulley puller to get the pulley off if you don't have one most auto zone part stores have a loan a tool program and they can help you with that on most powersteering pumps the high pressure line will be a fitting or bolt on and the return line is usually just a squeeze clamp hope this helps good luck
Posted on Jan 30, 2009
First thing you have to do is list all the codes, because some some might be stored for a long time. Pushing the OFF and WARM buttons together and holding will ghive you all the stored codes. Then press OFF and HI together to clear all codes. Hold and wait for bars or 0's. Now start your car and let it get up to proper operating temps. Take car for aride that aincludes all phases of driving including highway speeds. Observe SERVICE ENGINE LIGHT for coming on . Assuming it does , repeat steps previously provided, read codes stored and repair accordingly. If need be contact me with new codes and I will try to assist you.
Posted on Mar 16, 2009
Tips for a great answer:
Jul 16, 2015 | Cadillac Cars & Trucks
Mar 13, 2014 | Cars & Trucks
Jan 16, 2013 | 2003 Cadillac Seville
Aug 15, 2012 | 1997 Cadillac Seville
Apr 17, 2011 | 2005 Cadillac STS
Jan 25, 2011 | 2001 Cadillac Sts
Sep 12, 2010 | 2001 Cadillac Seville
Apr 17, 2009 | 1994 Cadillac DeVille
Mar 16, 2009 | 1992 Cadillac Seville
213 people viewed this question
Usually answered in minutes!