Question about 1995 Chevrolet Blazer

1 Answer

Shifting lever moves inside truck but its not shifting trans. just happened, shut the truck off working fine, got out of work , not working ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

The lever is connected to linkage which inputs gear selection into the transmission via a shaft. Have a man sit in the vehicle and move the gear selector gently through its range while you observe from underneath. If the linkage has become disconnected from that shaft you may be able to fix this yourself. If however the linkage is good, then you should have a transmission shop look at it. If the linkage is not moving at all then I would pull the console out and take a look at the bottom of the gear selector. Do not have the engine running please, this is why you cannot let a woman sit in the car while you are underneath it.

Posted on Sep 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 99 ford ranger 5 speed and my gear shift freely moves without pushing the clutch. What will cause that to happen


If the gear shift moves freely and the transmission is turning, I would say the shift lever is not connected to anything, or something inside the trans is broke.
If the trans is not turning, something happened to the clutch.

Nov 09, 2015 | Ford Cars & Trucks

1 Answer

My truck runs fine in park but when i go into reverse or drive it blows a fuse shuts down..


With the truck not running, but the key on move the shift lever through the sequence - f the fuse blows you have a wire getting pinched by the shift mechanism. Trace the linkage and look for a scraped wire or squashed wire.
If it only happens when the engine is running a wire is rubbing on the engine or trans and look for the same - a scraped wire or squashed wire.

Jan 29, 2015 | Cars & Trucks

1 Answer

Ford f150 shifter


Some year models have a electric lock on the brake pedal lever under the dash. Usually you can check it by pressing the brake pedal and observing the brake lights. If you lose this signal, the shift lever will not move from Park.

There can also be a shift rod inside the steering column which is linked to the ignition key. The shift rod can also be affected by the brake pedal switch failing to release the selector from Park. All 3 parts, ignition shift rod, brake pedal switch, and transmission release are adjusted together. Meaning if 1 does not work, the other 2 can be affected.

Dec 02, 2013 | Cars & Trucks

1 Answer

1999 ford gear handles moves but won't select gear and the car is still in park


Two things happen. On collum shift cars and trucks the bolts work loose out of the shift lever to the cable under the dash where the shift cable connects to the steering collum. the cable connects to a lever that is connected the the shift tube ( part of the steering collum ) bolt heads are 30 torx. the other thing that happens is the cable comes off the trans mission lever and it just snaps on. The bushing waers out and the cable just comes off the pin on the lever coming out of the transmission. Front wheel drive cars it's on the top and rear wheel and trucks it's on the side ( happens less on these and then the cable can break it'self, and the shift cable has to be replaced sometimes if the bushing in the end fails at the transmission end.

Jun 10, 2011 | Ford Taurus Cars & Trucks

2 Answers

My 2000 Sierra shifts into park, the light comes on as it is in park, but the truck rolls freely. Anyone has any idea what might be the problem? Thanks


First check the adjustment at the transmission lever were the cable attaches to. If it shifts into every other gear just fine the locking parking pawl has been worn away or broken. The pawl has a pointed 90 degree end that catches into the drum inside the transmission. It suppose to catch into a cogged tooth area of this drum causing the trans to lock in place.. It will be cheaper to service the emergency brakes if not working properly until you can finace the cost to repair the trans lock. This will cost a sizable amout to repair I know.

Apr 08, 2010 | 2000 GMC Sierra

1 Answer

2001 Hyundai - reverse gear is inoperative. The


If I understand you correctly, you have ALL forward gears working, but reverse doesn't?... then the problem is in the transmission itself or the linkage on the trans linkage into reverse.

Oct 18, 2009 | Hyundai Accent Cars & Trucks

1 Answer

2000 chrysler concorde will not get out of gear. trans doesn,t skip or slam it drives fine. you just can't move the shift lever


Change the shift cable (cable from shifter to transmission) Also spray some WD40 on the shift linkage on the trans and work it back and forth to loosen it up before you put the new cable on. Good luck

Jun 24, 2009 | 2000 Chrysler Concorde

2 Answers

Shifter won't shift gears


Have someone look @ linkage on trans. while someone moves shift lever thru the gears. If lever @ trans doesn't move then its in the linkage between the column and trans. (possible clip or pin broken @ linkage jounts). If lever @ trans moves then its a trans. internal prob.

May 03, 2009 | Ford F-150 Cars & Trucks

1 Answer

Shifting lever doesnt lock


Likely the shift detent mechanism is broken. It's inside the unit and can be reached by removing the trans pan. It should be just inside where the shift lever goes through the case.

Mar 17, 2009 | 1995 Jeep Grand Cherokee

1 Answer

1993 Grand Cherokee AW4 transmission issue


have you tried a rolling shift? leave trans in drive and try moving 4x4 lever. it works on mine!

Mar 14, 2009 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...