Question about Chevrolet Blazer

Open Question

Engine diagram 95 blazer 4.3 freeze plug locations

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 29 Answers

SOURCE: leaking water need to find

What size engine?? Most of the time, freeze plugs are usually toward the bottom of the block. on a V6 or V8 there are usually 2 on each side of the block. About the size of a 50 cent piece, you pop a hole in the plug with a punch or phillips head screwdriver and pry it out. Drain the block first though. I forgot it once and regretted it.....alot. LOL Good luck

Posted on Nov 09, 2010

  • 14036 Answers

SOURCE: diagram showing the location of


Posted on Sep 19, 2011

  • 226 Answers

SOURCE: please need pictures or diagram of the cap and plugs wiring

This what you looking for?

Posted on Aug 21, 2009

  • 395 Answers

SOURCE: i am trying to find

First I would check all those pesky little rubber vacuum hoses that are used for pollution control. They tend to go hard and split if they are over 10 years old, allowing air /vacuum leaks and also prevent functions that operate on good vacuum from working.

Posted on Sep 02, 2010

  • 14585 Answers

SOURCE: i need location of the

There are three on each side of the block and three on the back, between the engine and transmission. The ones you can't see on the sides are hidden by the engine mounts.

Posted on Aug 14, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Are there freeze plugs behind tranny on a 94 4.3 chevy engine

Gene, there are freeze plugs on the engine in which transmission would have to be removed to access. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Replace Freeze Plug On GM 4 3 V6 Engine
Block Plug Basics Tech Article Chevy High Performance Magazine
4 3L Freeze Plug Locations Blazer Forum Chevy Blazer Forums

May 11, 2016 | Cars & Trucks

1 Answer

Location of freeze plug 95 montero 3.0 engine and how to replace it

a couple of dollars for the plug and labor time around 5 hours as the motor may have to come out to get space to do the job

Jan 09, 2016 | Cars & Trucks

1 Answer

Where are the freeze plugs located on a 1995 Chevrolet Blazer?

There are three on each side of the block(one under each engine mount) there are three of them in between the engine and transmission. There are also some in the heads(maybe, I can't remember the year they stopped doing these), front and back.

Oct 16, 2014 | 1995 Chevrolet Blazer

1 Answer

Where are freeze plugs located on 97 blazer with v6?

they are on the sides of the block and in the heads near the exhaust manifolds. There may be one at the rear of the block and head/s as well. Have a coolant pressure test done to find the faulty plug

Jul 27, 2014 | 1997 Chevrolet Blazer

1 Answer

Need location or diagram of location of oil pan drain plug for 95 blazer

it is the bolt lowest on the oil pan hump off to the side.

Sep 29, 2011 | 1995 Chevrolet Blazer

1 Answer

A diagram of the flushing of a radiator and block of a chevrolet blazer LS 2000

Theres no such thing as a diagram, here are the draining instructions, hope this helps...
  • 1-Place a large drain pan beneath the radiator drain plug. The drain plug is located on the passenger side at the very bottom of the radiator on the engine side.

  • 2-Make sure the engine is cool. Open the hood of the truck and remove the radiator cap.
  • 3-Loosen the drain plug. On the 2000 Blazer, the drain plug is a wing-nut type of plug. Twist it with your fingers until the coolant begins to drain.

  • *To flush the block, once you have drained the radiator, run the engine for a bit untill the temp gauge goes up to normal, then the coolant will have been evacuated from the block. DO NOT leave the engine on, once it reaches normal temp, (this will happen quick) turn off right away, otherwise you'll be forking out a few hundred $$$ to fix the worped heads.
    4-Tighten the drain plug with your fingers once the coolant has drained fully from the radiator. Remove the drain pan and dispose of the used coolant properly.
    Some service stations will take and recycle your used coolant.
    Hope this helps...

  • Read more: How to Drain a Radiator From a 2000 Chevy Blazer '

    Aug 19, 2011 | 2000 Chevrolet Blazer

    1 Answer

    How to fixHow to Fix a Chevy Blazer engin block

    The freeze plugs are normally located on the side of the engine block.Make sure first thats what the problem is.This link will help you with your problem.Please rate my assistance towards your problem thanks.

    Feb 13, 2010 | 2001 Chevrolet Blazer

    1 Answer

    1994 s-10 blazer 4.3 vortec wiring harness

    The color codes will be different so when you take the harness off the 95 make sure that you label ALL the connectors to make it easier to install it on your Blazer. You may also have to change some sensors or switches up to 95 so that the harness will fit. Label all the empty connectors with their location in the 95 because they will be for options that may or may not be on your Blazer. If you have to access a wire diagram to complete the job then use the 95. DON'T let someone else take the 95 harness out for you andtake a rough diagram of your truck with the plug-ins marked for location and # of pins for wires. Basically it should fit but attention to detail is a must.
    Also check out faxonautoliterature. They list GM service manuals but also GM books for engine interchanges that may prove to be very helpful. Hope this helps.

    Nov 02, 2009 | Chevrolet Blazer Cars & Trucks

    3 Answers

    4.3 L vortec firing orcer and wiring diagram

    you need the firing order?? it is 1, 6, 5, 4, 3, 2 clockwise. Number one on cap is forward position, or 6 o'clock position, just left of the hold down bolt.

    Jan 22, 2009 | 1995 Chevrolet Blazer

    2 Answers

    Water leaking bad from front of motor.

    freeze plugs will be located towards bottom of the engine. It could be the water pump, or a bad hose.

    Dec 30, 2008 | 1996 Chevrolet Blazer

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    1,712 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts


    Level 3 Expert

    78289 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6927 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides