Question about Peugeot 405

1 Answer

I have a peugeot partner van and the wipers dont work. A have put on a new switch, but they still dont work, is it the switch

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,098 Answers

Hi

Most likely it will be a fuse, if you have already checked that then the wiper motor may have packed up. by switch I pressume you mean the main switch to turn them on? from inside the van.

I had one of these some time ago a 1999 version that had many problems with the wipers before I had the motor changed.
Hope that helps
Regards
Dan

Posted on Sep 30, 2010

  • Reg Varney
    Reg Varney Dec 29, 2010

    I had problem with mine very slow wouldn't work etc I just ran an earth from one of the mounting bolts to another mounting bolt on the motor itself - great works bwtter than ever

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

L/h/r indicator not working on 59 plate Peugeot partner van.


The rapid blink indicates the system has lowered resistance because a bulb circuit is open.

Jun 21, 2016 | Peugeot Cars & Trucks

1 Answer

How do I replace the bulbs in the radio display panel on my 2007 Peugeot Partner Van


you need two brackets .i made a pic .these are normal included,
in your manuel off the radio.puch them in the holes till you feel,
little resistants.then puch bolt sideways and the radio comes out.
am not sure if the bulbs are replaceble. 5a9905e7-8a87-4088-9e2c-7630794e0aa8.jpg

Mar 04, 2014 | 2007 Peugeot Partner HDi

1 Answer

Fitting trailer wiring to peugeot partner van. need to know van wiring colours, dont match trailers wiring colours


Hello, if you have a test light handy with a sharp tip on one side than, start with your parking lights on and check to see which wire it is, if you have a heavy bag of potatoes or similar, you can use this when it comes to the brake lights :)

Feb 18, 2011 | 2006 Peugeot 604

1 Answer

Cant find diagnostic port in peugeot partner


Look under dash near drivers door

Feb 25, 2010 | 2006 Peugeot 505

2 Answers

I have a 1996 peugeot partner 1.8 diesel van running problems


Better would have been to get the diesel injectors checked too.( Cleaned and calibrated )
Hope the injector pump timming is set correctly!

Jan 31, 2010 | 1991 Peugeot 405

1 Answer

Indicators are not working


had this before where the front indicators were not working and like you it drove me mad because the vehicle was booked in for its inspection.straight away i suspected the hazard switch,Anyway i had a spare flasher unit so i changed it and they worked ,So after i came back i took the old flasher unit apart and cleaned the contact on the solonoid and that started working as well when i put it back in.

Oct 24, 2009 | 2005 Peugeot 405

1 Answer

Peugeot Partner Van Brakes Drive Shaft


Check both sides of the discs if they are ok.If yes then quite possible that there is lots of brake dust between the discs and pads.

Aug 01, 2009 | 2005 Peugeot 405

2 Answers

Peugeot Partner Van 51 Plate


HI,AS IT IS HARD TO START THESE EXTRA COLD MORNINGS WE ARE GETTING,TRY A SET OF GLOW PLUGS, YOU CAN SEE THEM ACROSS THE FRONT OF THE CYLINDER HEAD,WITH A WIRE JOINING THEM UP,YOU WILL NEED A 8mm SCOKET , FOR THE WIRE, AND A DEEP 12mm ONE FOR THE PLUGS,UNSCREW TO THE LEFT,AND PUT A BIT OF GREASE ON THE THREAD OF THE NEW ONES AS THEY CROSS TREAD EASY,ABOUT 17POUNDS FOR A SET,THANKS.

Jan 03, 2009 | 2006 Peugeot 604

1 Answer

Warning light


how can i get pictures of wot warning lights look like on peugeot partner van

Aug 22, 2008 | Peugeot 604 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

628 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...