Question about 2002 Chevrolet TrailBlazer

2 Answers

I need step by step instructions on how to replace a water pump on a 2002 Chevy Trailblazer LT

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,121 Answers

For the I6 engine.... Just changed mine last night at 170k. Remove two top fan shroud bolts 10mm, remove electrical connector on drivers side of shroud. Take top radiator hose off of radiator, move it out of the way. Loosen, but don't remove fan clutch to shroud bolts 4ea 13mm. Using a fan clutch tool loosen the big fan clutch nut, take off. Then loosen the waterpump pulley bolts 4ea 12mm. Next, click the transmission lines out of their plastic holders near the bottom of the passenger side shroud. Next take the whole shroud and fan clutch up and out. This is the hardest part, 2 ways to do it to get past the radiator spout. 1- bend the shroud out and pull up. OR Cut notch in the shroud ( I did this) and pull up and out. With whole assembly out, use a 3/8" ratchet and put it into the tensioner hole and move clockwise to relieve pressure on serpentine belt, remove belt. Remove the pulley bolts, then, slowly untighten waterpump bolts and allow coolant to come out through the bottom. Remove pump 5 bolts. Reinstall everything in reverse order. Cutting the notch in the top of the shroud will knock a ton of time off in installation and re-installation. I just scored the plastic with a utility knife, then used dykes, popped right out in perfect size with one cut with the dykes.

Posted on Dec 03, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 1,311 Answers

Go to www.trailvoy.com and do a search on "how to replace water pump". You will find a thread with a procedure and pictures for the work required.

Posted on Oct 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is there strut and axle noise in rear?


2005 TrailBlazer Clacking and Clunking From Rear End ...

? 4:10
https://www.youtube.com/watch?v=HIA151KxImM
Mar 14, 2013 - Uploaded by sameasiteverwas122
2005 TrailBlazer Clacking and Clunking From Rear End ...Trailblazer clunking noise over bumps (the number 1 and 2 ... How To Find Suspension Noises 101 - EricTheCarGuy - Duration: 23:57. by EricTheCarGuy 1,497,067 views ... How to Install a Water Pump: 2002 - 2009 Chevrolet Trailblazer 4.2L L6 ...

Trailblazer Driveline Noises Discovered - YouTube

? 2:27
https://www.youtube.com/watch?v=GLhTUoHWdNM
Nov 4, 2013 - Uploaded by Roland Caston
the Trailblazer has developed some nasty noises. ... loose in thedifferential and the right front strut has torn through it's bushing.... How To Install Replace Front Axle Disconnect Housing 2002-09 GMC Envoy Chevy Trailblazer ... How Much Abuse Can a Trailblazer Take Part 2 : How to Replace a Rear Axle ...

Noise coming from back on trailblazer - YouTube





Jan 01, 2016 | 2002 Chevrolet TrailBlazer

1 Answer

2002 CHEVY TRAILBLAZER keeps setting a FAN Speed Sensor Code.


CJ, this is very common for the I6 engines in TB's and Envoys. You need a new fan clutch. Triple check the wire connectors first, located on the top of the radiator on the drivers side, make sure those are in tact first. Then replace the fan clutch. Might as well do your water pump and serpentine belt while you're in there.

Jul 08, 2015 | 2002 Chevrolet TrailBlazer

1 Answer

2002 chevy trailblazer won't start after changing


A six cylinder Trailblazer does not use a timing belt. It has a timing chain.
Are you sure you did not cause a problem with the cam or crank sensor ?

Jun 02, 2013 | Cars & Trucks

1 Answer

I have a 2002 chevy trailblazer that has a lot of coolant coming out of the water pump does this mean the water pump needs replacement?


Yes it does. It is coming out of the air exchange hole meaning the seal around the pump shaft has went bad. Mike

Jun 14, 2011 | 2002 Chevrolet TrailBlazer

2 Answers

How hard is it to replace the water pump. 2006 chevy trailbalzer LT Time to do job?


1 hour if have done them before.If not 3 hours should do it.however you need a special tool to take off the fan clutch from the pump.Caution should be used as not to damage the radiator as it is a tight fit.

Dec 02, 2010 | 2006 Chevrolet Trailblazer

1 Answer

I have 2005 chevy trailblazer heater wont work,


Sounds like your water pump is going out or your thermostat is stuck. Check the thermostat first and make sure it is not frozen in the clsed position.

Mar 10, 2009 | 2005 Chevrolet Trailblazer Ext

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

433 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...