Question about 2001 Chrysler Voyager

1 Answer

I can't find the rear brake adjust wheel on the rear brake drums, on my 2000 Chrysler voyager? Can you tell me if there is a brake adjusted wheel? Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear brakes (DRUM) IN 200 grand voyager not enough braking


Check in front of the left rear wheel there may be a pressure valve or valves some models had two they may need replacing there not the porortioning valve also make sure you have adjusted the rear brakes properly.

Feb 04, 2014 | Cars & Trucks

1 Answer

Are rear brakes in 2000 mazda protege self adjusting?


If the rears are not adjusted right, it could be a problem. And they should be self-adjusting, although often the adjusters get frozen from rust, corrosion, dirt. To adjust them, you drive in reverse and hit the brakes. Every time you do this the adjuster should click-it has made one turn on the adjuster's star wheel. Do it a few times: reverse, press brakes; reverse, press brakes. If brakes were too loose, and adjusters were working, the brake pedal may brake better now-pedal may be higher when brakes are pressed. If not sure, peel off the rubber plug on back bottom of brake backing plate. You should see the adjuster star wheel. Use a screwdriver and see if you can turn the star wheel either way. If still not sure, take the brake drum off, pull the shoes off, and take off the adjuster for cleaning. They are very simple devices, only a few parts to them. If they need cleaning to free up, do so. Then use some high temperature grease, very sparingly, on the adjuster's threads. Put them back on, shoes, and drums, then do the reverse and brake again to get them adjusted. Should work great now. When you pull the drum off, you can check if you need new brake shoes- not likely, but check.
Good luck.

Jan 18, 2013 | 2000 Mazda Protege

2 Answers

How to adjust handbrake


the adjustment is usually in the rear pads... when you remove the wheel and the hub, there is a little horizontal cylinder that you can turn in and or out to adjust. Out will apply the brakes more, in will apply them less. Having to adjust it usually means your brake shoes are worn....

Jun 07, 2012 | 2000 Chrysler Grand Voyager

1 Answer

I have a 2000 suziki grand vitara and cant furure out how to remove the rear drums


  1. Raise and safely support the vehicle.
  2. Remove the rear wheel(s).
  3. Release the parking brake.
  4. Remove the parking brake lever cover screws and loosen the brake cable locking nut.
  5. Install 2, 8mm bolts into the brake drum holes and uniformly tighten each bolt. Tighten each bolt until the brake drum is removed from the vehicle. If there is difficulty in removing the drum, insert a small tool through the hole in the rear of the backing plate, and hold the automatic adjusting lever away from the adjuster. Using another narrow, flat tool at the same time, reduce the brake shoe adjuster by turning the adjusting wheel.
If the drum is difficult to pull off using the bolts mentioned above, the parking brake is most likely the cause and will have to be adjusted "IN" to prevent drum to shoe contact.


ledsled378_171.jpg

Sep 20, 2011 | 2001 Suzuki Grand Vitara

1 Answer

Trying to remove rear brake drum cover,have already adjusted star wheel and still won't remove. what am i doing wrong? for a 93 plymouth grand voyager


  1. Raise and support the rear of the vehicle on jackstands.
  2. Remove the wheels and tire assemblies.
  3. Remove the brake shoe adjusting slot cover from the rear of backing plate.
  4. Insert a thin tool through the adjusting slot and hold the adjusting lever away from the star wheel.
  5. Insert an adjusting tool and back off the star wheel by prying downward with the tool.
  6. Remove the center hub dust cover, nut, washer, brake drum, hub and wheel bearings.
To install:
  1. Inspect the brake lining and drum for wear.
  2. Inspect the wheel cylinder for leakage. Service as required.
  3. Remove, clean, inspect and repack the wheel bearings.
  4. Install the brake drum and tighten the hub nut to 20-25 ft. lbs. (27-34 Nm), then back off the nut until bearing pressure is released.
  5. Retighten the nut finger tight, align the cotter pin hole and install the cotter pin.
  6. Adjust the rear brakes as described in the beginning of this section.

36e0d00.gif
Removing the rear drum adjusting hole cover plug

Oct 07, 2009 | 1993 Plymouth Grand Voyager

1 Answer

The rear wheel on my 1996 plymouth voyager will not come off. The parking brakes are off. I tried pulling it off with a wheel puller. The top of the drum is releasing fine, but the bottom of the hub is...


There are cut outs on the back of the drums were you can adjust the star adjuster with a brake spoon or straight blade screwdriver. Sounds like you adjusters are out forcing the drums to get hung up.

Jun 14, 2009 | 1996 Dodge Caravan

2 Answers

Can't find the brake shoe adjustment on my '99 plymouth voyager


there are 2 or 3 plugs a side on the vehicle. the adjusted can be seen through the top center one not ether of he side one(s). it is above the bolts that hold the hub to the axle, and just below the wheel cylinder fitting/bleed screw.

Apr 04, 2009 | 1999 Plymouth Grand Voyager

1 Answer

How do I remove the rear brake drums on a 1998 Plymouth Voyager ?


Usually you have to tap them off....you can use the brake adjuster and back it off as much as possible. This is a very common problem for ANY make or model.

Mar 11, 2009 | 1998 Plymouth Grand Voyager

8 Answers

Chrysler voyager drum brakes excess hand brake travel no adjuster how can a take up slack


i had the same problem with my crysler voyager 1997,a friend of mine who is a mechanic found the problem,it is a self adjuster on the handbrake itself,once drums are adjusted up you need to go to your hanbrake area and you will find a white plastic clip on the bottom of the lever ,once removed you pull up your handbrake a few times and it self adjusts,then put the plastic clip back on,this soved my problem,by doing this my handbrake went from about 13 clicks on max to hold . to about 6 clicks and held perfectly

May 22, 2008 | 2000 Chrysler Grand Voyager

Not finding what you are looking for?
2001 Chrysler Voyager Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...