Question about 1999 Chevrolet Silverado 1500

1 Answer

Need diagram of brake lines. I am replacing brake lines and need to know where each one goes

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Chevrolet Master
  • 3,854 Answers

Here is a link that should help you replace your brake lines on your Silverado.

Thank you for using fixya and be safe.
http://www.compnine.com/index.php?u=1&year=1999&artnbr=TC04-616&artsfx=NULL&supplgroup=99&catcode=56C&modelcode=C&makecode=LC&modelseries=100&uid=1&modelid=7059&capuid=1&majorgroup=04&grouptype=B
http://www.compnine.com/index.php?u=1&year=1999&artnbr=TC04-620&artsfx=NULL&supplgroup=99&catcode=56C&modelcode=C&makecode=LC&modelseries=257&uid=1&modelid=7059&capuid=1&majorgroup=04&grouptype=B

Posted on Sep 30, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 46 Answers

SOURCE: where can I find a diagram of the brake lines for

If it's a metal line, Your local auto parts store should be able to order it for you or worst case you'll have to make your own from straight tubbing and a bender. I don't recall ever seeing diagrams for metal lines, usually there pre made to replace the factory one or you can splice a replacement piece in place of a damaged section. AS far as the line goes to the module, try following it up to it with a good flahlight and a sharppe from the rear forward.

Posted on May 30, 2010

dttech
  • 4803 Answers

SOURCE: brake line diagram

I have been in the business for 35 years and have never seen a "brake line diagram". You easiest way to figure out which one goes to the right front would be to start at the right front caliper and follow it to the hydraulic control module.

Posted on Oct 17, 2009

  • 36 Answers

SOURCE: my brake line has a hole in it. Need to know where the line runs

Just replace the line

Posted on Dec 14, 2008

duane_wong
  • 6826 Answers

SOURCE: 1997 ford escort brake line diagram

The LF and RR are in an independent circuit of the RF, LR wheels. The master cylinder already has the lines hooked up in a way that if you trace the lines, you can make your own diagram.

Posted on Aug 03, 2010

  • 2309 Answers

SOURCE: diagram for 1996 dodge intrepid brake lines or

you should be able to route a line without removing the tank, just remove one strap at a time

Posted on Feb 07, 2011

Testimonial: "thank you for your response bad place to put a brake line"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which brake line goes to which which wheel from the master cylinder?


Not familiar with this model, but most cars have only one output and one return line to/from the master cylinder. The output line usually goes to a proportioner valve downstream from the master cylinder. This valve applies more pressure sooner to the rear wheels, then to the front. This prevents "fishtailing" when braking hard. If you follow the forward-most line away from the master cylinder, you'll probably encounter a block where this line feeds in and two or four lines feed out. That's the proportioner valve.

Sep 27, 2013 | 1998 Dodge Stratus

1 Answer

Need diagram for a 2004 chevy avalanche brake line


Brake line diagrams have never been avail
& you don't need them

If your replacing a rusted out brake tube, you
fabricate & duplicate the part your replacing

Given some experience you really could pump
a complete vehicle from scratch

To be working on any product, you have to understand
how it works & how to diagnose & make repairs,of coarse
almost no one has the thousands of dollars in tools at home
to do much on a car

I see you said can't flair line correctly

If that skill is lacking or you do not have the correct
tools your done

Brake tubing is only avail at auto parts stores in different
lengths of straight tubing, as you probably know

No diagrams
No ready made what ever tubing your replacing

Shouldn't say this,but repair shops don't do well
with brake tubing & some don't want the job
They just lack the skills & patience to do a decent job

Mar 28, 2013 | 1995 Ford Crown Victoria

2 Answers

Where can I find a brake line diagram for 1995 ford contour.


You buy brake tubing at the auto parts store,and fabricate what your replacing.
Have to know, how to bend and flair tubing, and have the necessary tools.

Oct 06, 2010 | 1995 Ford Contour

2 Answers

1997 ford escort brake line diagram


The LF and RR are in an independent circuit of the RF, LR wheels. The master cylinder already has the lines hooked up in a way that if you trace the lines, you can make your own diagram.

Aug 03, 2010 | 1997 Ford Escort

1 Answer

Where can I find a diagram of the brake lines for a GMC Jimmy? I nwws to replace the left rear brake line and I need to know the routing of the brake lines and where the line is at the ABS module


If it's a metal line, Your local auto parts store should be able to order it for you or worst case you'll have to make your own from straight tubbing and a bender. I don't recall ever seeing diagrams for metal lines, usually there pre made to replace the factory one or you can splice a replacement piece in place of a damaged section. AS far as the line goes to the module, try following it up to it with a good flahlight and a sharppe from the rear forward.

May 30, 2010 | 1994 GMC Jimmy

1 Answer

Brake line diagram


I have been in the business for 35 years and have never seen a "brake line diagram". You easiest way to figure out which one goes to the right front would be to start at the right front caliper and follow it to the hydraulic control module.

Oct 17, 2009 | 1999 Buick Century

2 Answers

Looking for a diagram for ford explorer brakes


I'm not sure what you are looking for. Are you looking for brake line diagram? Diagram of brake assemblies? Vacumm diagram? Here's a couple, if they don't help, let me know exactly what you need.

vacuumlinerouting.png
abs.jpg

Jan 11, 2009 | 1994 Ford Explorer Limited

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

876 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...