Question about 2007 Ford F-250 Super Duty Lariat

1 Answer

Went through the car wash. When left l noticed the check engine light was on truck runs fine all fluid levels good .could one of the senders have gotten wet . The light came once before during rain

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

Yes i have seen that before, maybe one of the sensor plugs the rubber seal is damaged.

Posted on Sep 30, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My engine oil light comes on but my oil level is fine. I notice that if I rev my engine just a little it goes out??????

may need oil change ==filter collapse --check oil pressure sender,malfunction loose or damaged wiring ---sludge

Sep 14, 2015 | 2003 Dodge Stratus

1 Answer

I just had a motor put in and my a t temp light is flashing from the moment gee started the car ...doesnt appear to be shifting and kicks hard in first ...rmp run over 3 all the time ..changed filter and...

First thing I would check is transmission fluid level. The fluid should be checked with engine warm, engine running, in park and good idea to have emergency brake on. You may know this but many people check transmission with engine off and think it is overfilled. I met one a couple months. It happens.

Aug 16, 2017 | Cars & Trucks

1 Answer

Battery light and break light are on

Check fuses then check voltage across battery with engine runnung, As for brake light check fluid level and sender switch at park brake going all the way to turn off

Nov 27, 2012 | 2006 Nissan Quest

1 Answer

Ford f150 1998 oil pressure gauge quit and oil light came on sometimes when I push gas the gauge comes up but then It guts again not runnerng any different and don't sound any different but I don't want it...

The oil sender went bad and the light came on check the oil 2 times engine running observe oil level and engine off observe oil level if when running the oil level is higher the oil pump is working and your ok and the sender failed or dirty connections if oil level is the same on both checks oil the pump is not working and needs to be replaced

Mar 06, 2018 | Ford F-150 Cars & Trucks

1 Answer

Gauges work fine when engine's started, then oil gauge falls below zero and warning light comes on saying "Check gauges," so I check the oil and transmission fluid levels and these are fine but...

start by checking the ground strap to the engine, and engine to body. The oil pressure sender unit may be bad. You may have to hook up an oil pressure gauge to the oil pressure sender port to verify proper oil pressure. Senders are cheap- I would just replace it and go from there.

Jan 07, 2011 | 2001 Dodge Ram 2500 Truck

1 Answer

Warning light consisting of just the word "BRAKE" and no picture--what does it mean?

find a good straight away and hammer the brakes. if brakes feel solid. check you brake fluid level at brake master cylinder engine bay, drivers side firewall. if fluid level is ok unplug the level sender at master cylinder resevoir-if this resets the light it is the switch in the master cylinder. If not unplug the switch attached to the e-brake lever.
if the brake feel spongy or fluid is low check for a leak in the hydraulic system.

Dec 15, 2010 | 2000 Chevrolet Malibu

1 Answer

The service engine soon light is on. The check engine light had come on several times the day before. The check fluid light had come on & went off. Added 2 qts. of oil to the engine and it is fine....

Have the computer scanned if you want a quick scan have Auto Zone or the like scan it for free , they also will give you a printout of the problem code, if any, that may be stored in the computer system.
Trans. fluid is only checked on a running in park warm engine, if it is not running the fluid will read too high on the stick showing an overfilled condition, use only recommended fluid, should have the type requirements stamped on the transmision dip stick.
When filling do it slowly and add only half a quart at a time checking the level each time as to not over fill.
The trans. fluid and filter should be changed every 30,000 miles as preventive maintenance proceedures.
Hope this helps, good luck!!

Nov 05, 2010 | 1999 GMC Yukon

1 Answer

Cruise control stopped working

check for power supplies and brake fluid level. if to low the cruise will not work.

Jun 10, 2009 | 1997 Honda Accord

1 Answer

94 Lexus GS300 Amber Oil Light Went On and Off

this light indicate tha oil level is low in engine , make a service oil ,or check the level, this light have an sender in oil pan and could be dirty

Feb 23, 2009 | 1999 Lexus Gs 300

Not finding what you are looking for?
2007 Ford F-250 Super Duty Lariat Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides