Question about Ford Focus

2 Answers

How to install outer door handle of Ford Focus

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,072 Answers

Remove inside door panel, remove bolts/screws of old door handle, install new handle

Posted on Sep 30, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 959 Answers

Remove the inner door trim pannel and carefully remove the inner door sealing plastic toward the top of the door .
There will be two holes in the doors inner skin to gain access to the handles 10mm nuts... remove the nuts and then the linkage to the door latching mechanism... and replace with the new handle...
reverse... and Voila !

Posted on Sep 30, 2010

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2006 Ford Fusion inside door handle stopped working

The plastic door handle is broken.
You will need to get a replacement door handle.
Go to http://www.flickr.com/photos/gtppilot/sets...57607539089979/
This should help. It is a set of photographs and instructions to do the job of replacing the handle.

Good luck.

Rgrdrake

Posted on Apr 10, 2009

  • 54 Answers

SOURCE: bmw 525 4 doors,how to remove rear door outer handle

has to remove the inside panel door and remove the clip inside to open the handle cover then u can see the two nuts and remove them

Posted on Mar 28, 2010

1ATony
  • 159 Answers

SOURCE: ford focus door handle

If it's an exterior door handle that you need to replace on your 00-07 Ford Focus, this video will show you how to fix it.

Posted on Nov 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 ford focus est o/s rear door lock has jammed in locked position how to open door.


Most often is a bent or worn-out linkage between the handle(s) and the release. Try locating the linkage and forcing it with a screwdriver or plier. Once you get it to open you can re-adjust them somewhat. I had to replace the outside handles mine due to excessive wear.

Jan 10, 2015 | Ford Cars & Trucks

1 Answer

How to replace outer rear driver side door handle


Remove the inner door panel, to get
access to the inside of the door

Oct 14, 2014 | Cars & Trucks

1 Answer

What parts do i need to repair the front door handle on my 2005 ford focus zx4. handle still there but doesnt open


there is a skinny rod that hooks up to the handle the little washer looking piece holds it in place it might have fallen off

Feb 28, 2013 | 2006 Ford Focus

1 Answer

2006 Ford Focus ZX4: Front passenger door handles do not engage, both inside & out, no resistance at all. Any exploded diagrams available to show what parts needed & how to...


the plastic clip that holds the door release rod on the latch is either broken, or fallen off, to fix this you need to remove the inner door panel, there will be screws along the door handle puller, and inside the little door cup, also on the inner door handle there's one, if you have mechanical windows there's a clip that holds that handle on, remove it with a small flat head screw driver, ( watch out they tend to fly off ) once the screw is off the door handle, pop it out towards you, and remove the rod and clip attached to it, once all the screws are removed,, take a putty knife, along the bottom of the panel and pop out the clips that hold this in place slide the panel up to get it off the window rail at the top of the panel,, now once inside your going to see a sheet of plastic, peel it back , look inside the holes in the door for a rod thats come off ,, once you locate the outer door handle,, you will see where the clip and rod go on one end or the other,,

Aug 26, 2011 | 2006 Ford Focus

1 Answer

How to install 2006 ford focus door handles


Hi first you need to remove the door panel then remove the clear plastic wind dust cover then locate the screw that holed the door handle on remove and refit.

Hope this helps.

Jun 03, 2011 | Ford Focus Cars & Trucks

1 Answer

Door wont open from outside ford c max can u replace the cable


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring. Pull back the weather seal and you can then access the linkage that connects the outer door handle to the latch assembly....

Nov 16, 2009 | 2003 Ford Focus

3 Answers

How do you take the door panels off?


How To Install Replace Remove Front Door Panel Ford Focus 00-05 1AAuto.com


Nov 08, 2009 | 2001 Ford Focus

1 Answer

Want to change broken door handles ford escort 1998


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Now you can replace the interior door handle. If it's the outer door handle, pull back the weather seal and disconnect the rod to the outer handle and then unscrew the handle from the door.

Oct 01, 2009 | 1998 Ford Escort

2 Answers

Ford focus door handle


If it's an exterior door handle that you need to replace on your 00-07 Ford Focus, this video will show you how to fix it.

Jun 12, 2008 | 2004 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

858 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...