Question about Mitsubishi Passenger

Open Question

2001 NM Pajero exceed 3.5lt V6 petrol engine stalls when the airconditioner is running when you slow down to idle speed. This happens when you are driving along and slow down to idle speed or when you start the car with the air conditioner switched on Does anyone know what could be causing the problem

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Pajero

No, timing chains are not expected to be replaced periodically like belts. Ocassionally they get noisey at high mileages and require a new tensioner pad but usually the chain is OK with a new pad

Posted on Jun 27, 2008

  • 9 Answers

SOURCE: 2001 LINCOLN LS V6 - ROUGH IDLE / SOMETIMES STALLING.

Very common problem is about a dime size hole wearing in the rubber elbow on the PCV valve located on the driver side rear of the intake manifold.

Posted on Oct 13, 2009

  • 540 Answers

SOURCE: 2000 CHEVY EXPRESS 1500 4.3L V6 ENGINE STALLS AT

need to run a fuel pressure test.. plugged fuel filter, and defective fuel pumps are common on this vehicle..

Posted on Nov 29, 2009

  • 1 Answer

SOURCE: 03' Pajero blows Instrument Cluster fuse each time car started...

Has it had an aftermarket Stereo Fitted? This is the first place I ould look if it has..

Posted on Jan 19, 2010

  • 1 Answer

SOURCE: i need the ignition timing marks for a 89 model

Hi, I would also like this information if at all possible. Many thanks

Posted on Feb 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford Focus c max 1.8 petrol idle problems


This can be caused by a defective Maf sensor and coolant sensor, they will not trigger a code because as long as there is a signal the computer doesn't know the actual engine running condition enough to say the signal from the 2 sensors is wrong, this goes double for MAF sensors, another area is the idle speed control motor.. I want you to read about the problem at the link below.

Ford MAX 2003 2010 03 1 8 Unstable Idle when slowing Technical matters...

May 20, 2016 | 2006 Ford Focus C-MAX

1 Answer

My Pajero GDI engine v6 petrol has idling and acceleration problem.


it is a possibility the potension meter does not working. It is on the accelerator pedal,by using a scanner surely you will get the correct fault.

Mar 06, 2013 | Cars & Trucks

1 Answer

2001 Chrysler Concorde LXI randomly stalling while slowly dow to stop or turn. Will usually crank back. This car will sit and idle for ever, but when you drive it for 10-15 minutes and slow down to stop or...


One suggestion:
Speed sensor failure.

Info:
Some of the classic symptoms, stalling at dead stops. failure to auto lock doors. poor fuel economy. Failure to go to overdrive.


Recommendation:
Go to your local parts store and run the failure codes.

Shop notes:
Your ECU thinks that the engine is running with out moving, During slow down the engine steps down the idle to match ground speed and as a result the engine will not stall. At present it goes directly to idle and stalls due to drag on motor.
Hope this tip helps.

R/
David

Mar 21, 2010 | Chrysler Concorde Cars & Trucks

2 Answers

2000 CHEVY EXPRESS 1500 4.3L V6 ENGINE STALLS AT IDLE BOGS DOWN AT SLOW SPEEDS AND SOMETIME STALLS ANY HELP?


need to run a fuel pressure test.. plugged fuel filter, and defective fuel pumps are common on this vehicle..

Nov 29, 2009 | 2000 Chevrolet Express Cargo

2 Answers

How do I set the idel on a 2001 Jeep Cherokee?


the idle is controlled by the computer. you have to have the ecm reflashe dby a professional

Nov 22, 2009 | 2001 Jeep Cherokee

1 Answer

Truck loops during idle and eventually stalls.


Here are some of the causes of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Apr 07, 2009 | 2001 Ford Explorer Sport

1 Answer

Rpms Too Low


the idle speed is controlled through the on board fuel injection control module (known as the PCM), even if u raise the idle at the throttle body the computer will slow it back down, however there is a problem that causes slow idle, do the following procedure to correct the slow idle issue, follow it exactly.

Here are some of the causes of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Apr 07, 2009 | Pontiac Grand Prix Cars & Trucks

1 Answer

Car petrol engine revolution surges.


Here is the most common cause of surges and stalls, it is the idle speed control air-bypass valve and throttle valve, they get full of gunk over the miles and cause idle issues (stalls) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Oct 28, 2008 | 2004 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...