How can i reset the check engine light on a 93 geo tracker

According to the web sites,if you remove the panel below
or next to the steering column,there is a switch you move
opposite to where it now is & that will clear any mil lamp
or maintenance lamp

I would google the question to see if I understood that

all last post was error, under GEO Prism the car is really
a 93 tracker, not that is much more easy
make sure you know what engine you have first. 8valves or 16v
as every other page is different by those 2 factors. (engine type)
most are here. (to make car run and lamps work)
http://www.fixkick.com/schematics-run.html
yours is here.

page one here, may cover it.

http://www.fixkick.com/power-elect/95%20electrics/95powersistra1.pdf

the link is really just a large fuse. for A./C
did blow the main fuses. messing with battery or alternator or starter>?

on all cars ,before messing, pull the NEG battery lug first.
this prevents blowing out those big puppy fuses.

old post
go to walfart or any autostore on earth
buy the car radio adapter kit $10, for 93 tracker or Sidekick
plug it in and it works
easy huh> PNP , plug and ply magic of ADAPTORs.
if car was hacked, different long answer.

old post.
which engine, 8valve TBI or 16v MPI?
but works on all cars with , 1 more step.
1: pull battery neg. lug, first, or boom, eat acid/go blind, etc.
2: remove evap canister front of the intake MAN.
3: remove alternator ,makes this super easy,
4: see brace under the intake MAN, remove that
5: unbolt starter. after removing its wires.


just 5 steps.
step 4 is UNIQUE to THIS CAR.

here is the starter , exposed.
http://www.fixkick.com/engine/97-motor-pull/HTML/image_50.html

the 16v brace is see here part id #35

http://www.fixkick.com/sensors/ECT-loc.JPG

8v
brace 28
http://www.fixkick.com/sensors/EGR/8v_only/8v-egr1.jpg


if that dont work find an 8yr kid to wiggle arms in to this small space.

The check engine light being on indicates a problem in the electronic system that controls the engine, so resetting the CE light without reading the code that was set with the light being turned on by the on board computer has not fixed the problem that is keeping it from starting. This is an early system called OBD1, it requires a special scanner to plug in and read the fault codes you have. .

Front RH side of engine compartment below throttle body (second sensor from the right)

A 1993 Tracker will have OBD1 technology. Just unplug the battery for 5minutes and plug it back in. If the light persists You will have to find out and repair the problem that your cars computer believes it has.

if you have a auto zone or some thing like it they will come out and scan your car for you for free tell you what the code is what it means and erase it for you. just remember to write down the code because they are just parts people not mechanics. and then let us know what code it is.

I had the very same problem with my 94 tracker and it turned out to be something simple. My check engine light had popped on after it had hit 100,000. I went through all of the suggestions that people had suggested (unplug battery......etc) and still to no avail. Searching the internet, I came across a website called suzukiforum.com and there, this guy was able to help me with my problem. It turned out to be a maintenance switch that kicks on every 50,000 miles. This switch is like a secret that the auto manufactures use to ploy owners of their cars to bring to the dealer and then rack up the dollars in unnecessary "repairs". The switch is located under the dash and can be hidden anywhere. From the assistance of the guy on the forum, he was able to send me photos of this damn switch and possible locations where it may be mounted. I found mine in about 5 minutes, where it was attached to the steering column. It's a tiny switch, that you slide up or down, depending on what position it is in upon finding it. If it's up, then slide it in the down position and visa versa. Once you do this, the check engine light will go off. Make sure you do not have the car running and you can even unhook one of the battery posts, just to make sure you don't hit anything while rooting around under the dash. Good luck!

acording to motor manual
engine code U is 9.1
engine code 6 is 10
add for AC 1.3
add skid plate0.2
the trans depends on 2 wheel drive 4 wheel drive?
and auto or manual.

and as for you question about the 93 engine only if its the same engine code.