Question about Ford F-250

1 Answer

How to change the front rotors - F-250 Ford Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 8,589 Answers

Please see my tip at http://www.fixya.com/cars/r6016398-replacing_brake_pads_shoes . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on Sep 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2010 dodge caravan minimum rotor thickness


Auto Parts Stores have books for that spec

Sep 12, 2014 | 2010 Dodge Grand Caravan

1 Answer

Change front rotors on 97aurora


I hope you mean change front rotors, AND change front disc pads...This front brake set-up is fairly easy for a novice to do also. Why mention rotors? Are you experiencing a vaibration when applying the brake pedal? Yes, this is a sign of warped, worn out rotors...also inspect caliper piston movement, and top off brake reservoir after parts change. The caliper hold down bracket must be removed to change the rotors...2 bolts with good breaker bar, maybe 16 17mm socket and 13mm socket for removal of the caliper (2) bolts...lubricate and clean all parts and slide pins...be sure to thoroughly spray new rotors with brake parts cleaner before installing...this removes the packing oil from the rotors...(will ruin new brake pads and smell) Hope this helps.

Jan 21, 2013 | 1997 Oldsmobile Aurora

1 Answer

My 2004 LeSabre shakes bad when I brake at around 50 mph. I changed the front brake pads. How difficult is it to change the front rotors?


Actually, changing the front rotors is not that difficult and they are relatively in-expensive. Anytime you change the pads on the front of your vehicle i would recommend having the rotors resurfaced or replaced. Especially if you are getting a brake pedal pulse when applying the brakes. Here is a step by step guide that will help you in removing your Front rotors.

Nov 03, 2010 | 2004 Buick LeSabre

1 Answer

How do i change the brakes and rotors on my 2004


When you say fit properly I assume you mean it's not going back together. Make sure you have the bearings and races installed correctly on the back side and that you are installing the correct rotor on the correct side with the correct bearings. The front and rear bearings look the same but they aren't and if you try putting that rotor on with the front side bearing installed in the rear of the rotor it will never go back together.

Jul 12, 2010 | 2004 Toyota Sienna

1 Answer

Changed my front brakes and rotors..ABS light came


did you knock off a wire on the sensor ,or even break the sensor unit when you changed the rotors..

Jul 11, 2010 | 2006 Chevrolet Colorado

3 Answers

My car front end wobbles when braking and at higher speed


did you have the front brake rotors machined, they are warped. either replace the brake rotors or have then machined, I prefer just replacing them as they are fairly cheap.

May 04, 2010 | 2004 Chevrolet Cavalier

1 Answer

I changed out the front rotor on my car and the


No you're fine. Do not remove the large nut and cotter pin. This is for the axles. If you are replacing the rotor, take a hammer to the old rotor on the outside diameter where the pads press against the rotor and do this around the diameter. It is rust holding it in place. You can also take wd-40 and spray the hub where the rotor meets.

Mar 14, 2010 | 1991 Toyota Tercel

2 Answers

Makes noise and pulsates when stopping sometimes no ABS light


Hello, from the sounds of it you may have warped brake rotors.

Mar 28, 2009 | 2001 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...