Question about 1996 Cadillac DeVille

1 Answer

How do i change the water pump belt on my 96 32v v8 cadillac

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,051 Answers

Hello there:

how do i change the water pump belt on my 96 32v - 5f07b70.jpg
Remove the water pump belt shield
3f40e10.jpg
Loosen the water pump belt adjuster and . remove the belt from around the water pump

Posted on Sep 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Do I need special tools to change water pump on 2005 cadillac cts


  1. You'll need a tool to release the tension on the serpentine belt and when you need to put the belt back on. Regular standard socket wrenches will suffice for the rest.

Oct 02, 2016 | 2005 Cadillac CTS

1 Answer

How to change water pump belt on a 2000 Cadillac northstar deville


Best way is to remove the water pump belt tensioner. to get the old belt off and the new belt on. this is the easiest way to accomplish the task. 2 bolts hold it in place on the water pump housing.
http://www.youtube.com/watch?v=wGL_qM3VJOc

Jul 04, 2014 | Cars & Trucks

1 Answer

Where is the water pump located


on the back of the engine, you will find a belt gard this is the water pump belt, remove the belt gard and the belt ( just push down on the tensoner ) then you will need to get a cadillac water pump socket in order to remove the pump from the housing.

Mar 22, 2011 | 1999 Cadillac Eldorado

1 Answer

How do i change the water pump belt on a 2001 Cadillac Deville .


2001 Cadillac Deville 4.6L SFI DOHC 8cyl Removal & Installation procedure...

1. Before servicing the vehicle, refer to the Precautions section.
2. Drain the coolant.
3. Remove or disconnect the following:
Negative battery cable
Upper fill panel, if equipped
AIR injection control valve, if equipped
Air cleaner
Oil level indicator tube nut, if necessary
Water pump belt cover
Water pump drive belt
Lower radiator hose
Thermostat bypass hose from the coolant inlet housing
Water pump cover

4. Remove the water pump by rotating it clockwise using special Tool J 38816-1A (water pump remover/installer).

To install:

1. Install the water pump with a new O-ring, by turning it counterclockwise using the special tool, until it stops. Torque the water pump to 73 ft. lbs. (100 Nm).

  1. zjlimited_842.jpg

Fig. To ensure proper operation, be sure to install a new O-ring (click for zoom)

2. Install or connect the following:
Water pump cover. Torque the bolts to 89 inch lbs. (10 Nm).
Lower radiator hose
Thermostat bypass hose to the coolant inlet housing
Water pump drive belt
Water pump belt cover
Oil level indicator tube nut, if necessary
Air cleaner
AIR injection control valve, if equipped
Upper fill panel, if equipped
Negative battery cable

3. Refill and bleed the cooling system.
4. Run the engine and check for leaks.


Hope this helps (remember to rate this comments)

Mar 10, 2011 | 2001 Cadillac DeVille

1 Answer

I have a 99 cadillac eldorado it is overheating i changed thermostat and coolant it still overheats i beleive the water pump works the fans work when put coolant in the over flow it shoots out when it gets...


Hello: Open hood, stand in front of car look on left side (driver side) of engine toward the radiator, there will be a black metal guard, under the guard there will be a small belt. This is the belt that drives the water pump. Make sure the belt is there. If belt is there start car and with engine running check to be sure belt is turning and that the water pump is turning. If all that is okay then you may have blown head gaskets. To check head gaskets you need a sniffer tool to smell the engine coolant which will tell you if you have exhaust gas in the coolant.

Jan 21, 2011 | 1999 Cadillac Eldorado

1 Answer

In a v8 why would the water pump go bad with only 52000 miles


Belt tension to tight or you just got one that has been made on a Monday. Just kidding. belt tension is the no 1 fault as it runs the bearing on a angle and the seal will go after a while.

Sep 21, 2010 | 2006 Cadillac STS

1 Answer

Trying to remove the waterpump pulley on a 92 Cadillac Sedan DeVille 4.9 V8


  • When replacing a water pump, it is necessary to drain the cooling system.
  • Any components--belts, fan, fan shroud, shaft spacers, or viscous drive clutch--should be removed to make the pump accessible. Some pumps are attached to the cylinder block as shown below.
f11-60.jpg Installing a water pump. Courtesy of Dana Corporation.
  • Loosen and remove the bolts in a crisscross pattern from the center outward.
  • Insert a rag into the block opening and scrape off any remains of the old gasket.
WARNING When working on the coolant system (for example, replacing the water pump or thermostat), a certain amount of coolant will spill on the floor. The antifreeze in the coolant causes it to be very slippery. Always immediately wipe up any coolant that spills to reduce or eliminate the chance of injury.
  • When replacing a water pump, always follow the procedures recommended by the manufacturer.
  • Most often a coating of good waterproof sealer should be applied to a new gasket before it is placed into position on the water pump.
  • Coat the other side of the gasket with sealer, and position the pump against the engine block until it is properly seated.
  • Install the mounting bolts and tighten them evenly in a staggered sequence to the torque specifications with a torque wrench. Careless tightening could cause the pump housing to crack. Check the pump to make sure it rotates freely.
  • The water pumps on many late-model OHC engines are driven by the engine's timing belt. When replacing the water pump on these engines, always replace the timing belt.
  • Make sure all pulleys and gears are aligned according to specifications when installing the belt.

May 22, 2010 | 1992 Cadillac DeVille

3 Answers

How to tell if water pump for 04 cadillac srx needs to be replaced.


Your car will overheat very fast and you may either notice coolant leaking from the location of the pump and also possibly a squealing noise due to a bad bearing. Overheating can also be caused by a bad thermostat.

Feb 17, 2010 | 2004 Cadillac SRX

2 Answers

HI. I HAVE A CADILLAC SEVILLE V8 4.9L '93 135000


thermostat, or you have ablockage in the system ,did you burp it?

Sep 02, 2009 | 1992 Cadillac Seville

1 Answer

Trying to locate water pump on my 2000 caddy deville


Its on the same side of the engine as the transmission, driven by the belt up top. It requires a special socket to remove the pump from the housing.(also, the pump turns clockwise to remove!)

Dec 23, 2008 | 2000 Cadillac DeVille

Not finding what you are looking for?
1996 Cadillac DeVille Logo

Related Topics:

725 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...