Question about 2007 Chrysler Aspen 4x2

2 Answers

What will cause the abs light to come on and stay on?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,340 Answers

The ABS system is not too complex but very tedious if you want to self-repair.There are wheel speed transducers which measure the speed which the tire is turning,sends a signal to a computer and the computer tells the brakes to apply/disengage to prevent skidding in fractions of a second for maximum brake with no skid.A constant light is most likely a failed component.The best bet would be to have it computer analyzed.To do the same thing manually which the computer does,it would take hours and hours and is not worth it.Yes the computer costs money,I do not know how much,but will prevent 1 big headache.Shop around for pricing.Some places will give you credit for the computer check towards fixing it I have found,but not sure which systems.Good luck! Greg

Posted on Sep 29, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 869 Answers

You need to take your chrysler aspen to a dealer. the process is trickier than you think.

Posted on May 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2008 Jeep Wrangler x 'S abs light stay on what is causing this what do I need to change on it??


When the ABS light stays on it means the control module has detected a fault in the ABS system, the light is turned on to alert you and the ABS system is turned off, so right now you have plain old brakes, no ABS. You must have the ABS code read and then diagnosed for the defective part that is causing this light.

Sep 28, 2016 | Jeep Cars & Trucks

2 Answers

Why does my ABS light stays on and sometimes i get a vibration in the brake petal causing my 2002 Cadillac escalade not wanting to stop?


Sounds like a fault with the Antilock Braking System. The vibration in the pedal is the ABS working. With your foot on the brake pedal, it releases and re-applies the brakes to stop a skid from the wheels locking up. You need professional service for brakes.

Seems to be a known issue on all Cadillac and requires the ABS module to be replaced.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille Cadillac DeVille ABS Light Due to ABS Control Module Failure. This is a verified problem based on 126 reports. Learn more about this problem, when it occurs ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville STS Traction control and ABS lights stay on dash. This is due to ecbtm Module gone bad. replace Module and this should fix the problem. You can go by the VIN and ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille DTS ABS Light Due to Control Module Failure on Cadillac DeVille DTS. The anti-lock ... ABS and Traction control light stays on. ... abs light to abs control stay on.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville SLS ABS Light Due to Control Module Failure on Cadillac Seville SLS. The anti-lock brake ... SLS135,000Jumsee. Abs and traction lights stay on when started.

Jan 12, 2016 | Cadillac Cars & Trucks

1 Answer

ABS light on


Did you bleed your brakes? If you didn,t there is air in the lines ,This will cause the light to stay on, Or you might have a (Faulty) ABS sensor on one of the brakes,

Oct 08, 2012 | 1998 Dodge Dakota

1 Answer

ABS light stays on - can you unsolder relay in ECM with common iron.


ABS light on did they check codes ? The light staying on an no codes is usually a insturment cluster problem not the EBCM - electronic brake control module . No relay in side the module , a transistor or diver as they call them . This transistor will supply a ground on a electrical circuit from the brake lamp driver module ,when it does this the brake lamp driver module ground a electrical circuit for the ABS light . If anything is bad causing the ABS light to stay on it would be the brake lamp driver module . Your best bet ,take it to a GM service dept.

Aug 05, 2017 | 1999 Pontiac Bonneville

1 Answer

4WD AND ABS LIGHTS STAY ON ON NISSAN X TRAIL, WHY?


One of wheel ABS sensor is defective

Jan 12, 2012 | Cars & Trucks

2 Answers

2001 GMC SIERRA . ABS LIGHT STAYS ON


Wheel speed sensors misadjusted, damaged , or metal shavings and other debree, since they are magnetic can give false readings from one of the wheel circuits. Over sized tires can give of false speed readings as well. there are many other causes including bad relay, control module, e.t.c. It is best to have the proper scan tool to diagnose an ABS problem

Jul 08, 2009 | 2001 GMC Sierra Crew Cab

1 Answer

ABS and ASC warning lights stay on 2000 530d


Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

Jul 06, 2009 | 1999 BMW 5 Series

1 Answer

Abs light on always


Have you checked your brake fluid? It may be low or an indication that the brake pads are worn, causing the light to stay on.

Apr 27, 2009 | 2003 Kia Sedona

1 Answer

My ABS light and Airbag light stays on


Get your ABS fixed. The airbag light can only be reset by a dealer. Usually caused by a bad or disconnected seat sensor

Apr 04, 2009 | 1997 BMW 318

2 Answers

97 Lumina dash warning lights stay on


For the security light you need to replace the ignition lock cylinder or bypass the security system. For the other two, you need to have the car scanned to see what codes are in the ecm and the abs module.

Mar 19, 2009 | 1997 Chevrolet Lumina

Not finding what you are looking for?
2007 Chrysler Aspen 4x2 Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...