Question about 2001 Ford Focus

1 Answer

Oil is being pushed out of eng/ breather pipe

I have ford fiesta 1600 petrol etek eng/ 2001.please help me someone .patricia

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

Try to replace the pcv valve patricia and see if that helps. good luck buenas noches

Posted on May 28, 2008

  • Lee Collier
    Lee Collier Feb 07, 2014

    breather tube has been replaced. do I need to have valve cover removed and cleaned or what?



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2001 ford focus engine is racing and then dies.

if petrol and depending on year ?? 2001 ?' then in front of the engine under the manifold is a breather pipe ,two in fact going into one pipe ,renew these as they will be perished and split causing the problem exactly as you stated

Apr 02, 2016 | Ford Cars & Trucks

1 Answer

I have a 2003 1.6 petrol ford fiesta, it started by failing start up when warmed up. Cuts out while driving

Ford Fiesta Start-Up Flaw (CPU-Based) - YouTube

? 1:54
May 29, 2012 - Uploaded by georgef551 I found a start-up flaw in the Ford Fiesta, when I occasionally tried to start the car quickly, and... ... this happened. I had them either fail to fully turn over, or other CPU-based starters wouldstart up the vehicle. ..... Ford Fiesta 2004 Lx 1.4 petrol mk6 won't start help ! ... 2012 Ford Fiesta Zetec 1.6 TI-VCT. Start .

Jul 27, 2015 | Ford Cars & Trucks

1 Answer

Oil is being pushed out of eng/ breather pipe into carburator land rover defender 110. it happens when i am at a speed more than 80km/h

Sounds like excessive blowby from rings However check the oil level as over fill will allow the oil to aeriate and cause a problem. Check the pcv valve for correct operation

Mar 07, 2013 | Cars & Trucks

1 Answer

What does the p2173 code mean??

well i dont where you got the codes but they do not match up with the generic codes and not the hyundai codes
P0173 Fuel Trim Malfunction (Bank 2) -Malfunction

P0106 (MAP) Manifold Absolute Pressure/(BARO) Barometric Pressure Sensor -Circuit
Range/Performance Problem

P0195 Engine Oil Temperature Sensor Circuit Malfunction
sounds like you could have a breather pipe from the engine to the inlet manifold playing up from them codes ,now remember i have never seen a petrol version of this vehicle only ever a diesel here in spain so i have no idea where to you to look first sorry

Feb 14, 2012 | 2007 Hyundai Santa Fe Limited

1 Answer

Red symbol (!) lit up on panel on ford fiesta flight 2001. What does this mean?

The red symbol means lubricant/oil is less than normal level.
Better check the level of your oil and add some until it reaches the maximum level.
Next time you put on some petrol/gasoline, ask the station attendant to check your oil level and ask him to add some oil.
Hope that helps!

Oct 01, 2011 | Cars & Trucks

1 Answer

Hi, iv'e just bought a ford fiesta 1.25 petrol

Check the trans oil -QUICK- This baby's getting hot.

May 26, 2011 | Ford Fiesta Cars & Trucks

1 Answer

My ford focus 1.6 petrol engine is leaking oil from the back of the engine. How can it be fixed?

hi i have a 2001 1.6 zetec ford focus. the engine managment light is on and my car has bee leaking oil into the airbox on the floor and onto the gearbox coming from the rocker cover breather hose ( i have changed the camshaft breather hose and valve ) any suggestions ?

May 21, 2010 | 2001 Ford Focus

1 Answer

I have a vw passat 2001 2.0s petrol which has developed a fault. the engine management light came on some 3 weeks ago and since then the dealer has fitted a new cat and replaced some oil breather pipes but...

vaccum leaks cause this type of misfire . this sometimes happens when someone works on car and does not tighten hoses also could be low fuel pressure or lean fuel caused by air to fuel ratio. i would try vaccum first

Oct 20, 2009 | 2003 Volkswagen Passat

Not finding what you are looking for?
2001 Ford Focus Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers


Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides