Question about 2001 Oldsmobile Aurora

1 Answer

The blower motor on my 2001 olds aurora failed. i am in the process of replacing it. I have all the screws removed, removed the glove box and carpet and the box of connections next to the blower. I need to remove the ductwork on the left and am having trouble. What do I need to do to get the old blower motor out?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 615 Answers

I don't know if there are any tricks. At this point you just have to wrestle it out. There seems to be a certain position that works but I don't remember exactly. I do know that gettting it out was easier than getting the new one back in.

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the blower motor resitor located


under glove box by blower motor has two screws that holds in place.

Aug 03, 2012 | 2001 Oldsmobile Aurora

2 Answers

I cant find the blower motor


If you mean the climate control blower motor, it's usually under the dash on the passenger side on Hondas.

1990-93 Accord
  1. Disconnect the negative battery cable. If so equipped, disable the Supplemental Restraint System (SRS).
  2. Remove the glove box.
  3. Remove the glove box frame (lower support) Fig. 2: Remove the glove box and frame 86806004.gif

  4. If not equipped with air conditioning:
    1. Remove the three screws and remove the heater duct.
    2. Remove the blower mounting nuts. Unplug the wiring from the blower motor, resistor and recirculation control motor, then remove the blower assembly.
  5. If equipped with air conditioning:
    1. Lift the carpet in the passenger compartment. Remove the side cover (kick panel).
    2. Remove the control unit bracket nuts; unplug the five connectors and remove the control unit bracket.
    3. Remove the retaining band, then remove the blower lower covers. Do not break the tabs on the lower covers.
    4. Remove the retaining nuts and remove the blower assembly. Fig. 3: Air conditioned models require the removal of the control unit. Handle it carefully 86806005.gif
      Fig. 4: Remove the lower covers from the blower unit 86806006.gif
      To install:
  6. Install the blower unit and tighten the retaining nuts.
  7. On air conditioned vehicles:
    1. Install the lower covers and the retaining band.
    2. Install the control unit bracket and carefully engage the wiring connectors to their proper location.
    3. Install the kick panel and reposition the carpet.
  8. Connect the wiring to the blower assembly. For non-air conditioned vehicles, install the air duct and tighten the screws.
  9. Install the glove box frame and install the glove box. Note that some of trim on the frame is held with 2-sided tape; replace the tape when reassembling as necessary.
  10. If applicable, enable the SRS.
  11. Connect the negative battery cable.
1988-91 Prelude
  1. Disconnect the negative battery cable.
  2. Remove the glove box and frame (lower support).
  3. Remove the 4 screws and remove the heater duct. Fig. 5: The glove box and frame are secured by several small screws 86806007.gif

  4. Remove the 3 mounting bolts.
  5. Unplug the wiring connectors from the blower motor, resistor and recirculation controller. Remove the blower motor assembly.
  6. Reinstall in reverse order. Make certain the blower mating surfaces are tightly sealed.

Jan 08, 2011 | 1992 Honda Accord

1 Answer

How do I replace the heating fan on my 2000 Kia sportage


Blower Motor
Removal & Installation
To Remove:


  1. Evacuate and recover air conditioning refrigerant.
  2. Remove battery.
  3. Disconnect and cap A/C lines at evaporator tubes.
  4. Remove blower motor assembly drain.
  5. Remove glove box.
  6. Remove 5 screws and right hand instrument panel lower trim panel.
  7. Remove screw that attaches upper center console to gain access to left
    instrument panel lower support.
  8. Remove left and right bolt and remove instrument panel lower support.
  9. Detach control cable from inlet duct.
  10. Disconnect blower motor electrical connector.
  11. Pull carpet back and remove hole cover plate.
  12. Remove 2 bolts at top of blower motor assembly.
  13. Remove 2 nuts that attach bottom of blower motor assembly to mounting studs
    on bulkhead.
  14. Remove blower motor assembly.

To Install:


  1. Install blower motor assembly.
  2. Install 2 bolts at top of blower motor assembly.
  3. Install 2 nuts that attach bottom of blower motor assembly to mounting studs
    on bulkhead.
  4. Install hole cover plate and replace carpet.
  5. Connect blower motor electrical connector.
  6. Install instrument panel lower support and install left and right bolts.
  7. Install right hand instrument panel lower trim panel and 5 screws.
  8. Install glove box.
  9. Install blower motor assembly drain hose.
  10. Connect evaporator lines at bulkhead.
  11. Evacuate and charge air conditioning refrigerant.
  12. Install battery.

Oct 29, 2010 | 2000 Kia Sportage

1 Answer

How to replace a blower motor on a 2002 aurora


There are 5-6 screws holding it in on the passenger side behind/under the glove box. -Remove 3 screws on the bottom of the glove box - don't remember if the door comes off or not. -Remove the bottom panel under the dash. -I believe I removed the two screws holding in the resistor pack to the right of the blower motor and removed that to get more room. -There is a screw in the way back of the blower that you need a universal joint on a socket to get to. -I believe I pulled back part of the carpet to get more room underneath the blower. Even so this was a bear to get out - and even harder to get in. I'll lookup the instructions in the service guide tonight to see if there is any other help. Bill

Sep 03, 2010 | 2002 Oldsmobile Aurora

1 Answer

How to replace blower motor system pack on 2001 chevy malibu


first, remove the lower right dash insulator panel from below glove box. slide bcm aside for access to blower motor.(slide to right). remove 3 screws from blower housing, pull blower motor and fan straight down. if putting in a new motor, use cage from old blower. the resistor for fan speeds is located beside motor. good-luck!!

Jul 29, 2010 | 2001 Chevrolet Malibu

1 Answer

2001 Grand Prix: Is the blower motor resistor on a Pontiac 2001 Gra...


It is behind and underneath the glove box back by the firewall. No need to pull out the glovebox.You may need to pull the carpet back to get to one of the bolts.

May 16, 2010 | 2001 Pontiac Grand Prix

2 Answers

Where is the blower motor located on 2000 Dodge


The motor is located just under the glove box on the passenger side. I removed the glove box then the panel below the glove box. I also go ahead and pull back the carpet and the padding under the motor. It is held in place by 3-4 bolts that take a 7-8 millimeter socket. I used a swivel extension for the back bolts. The motor with the fan blade attached is a tight fit, just keep wiggling and pulling it should come out. Try to remove the old motor without cracking the fan blade, because sometimes the replacement motor doesn't come with a blade.

May 13, 2010 | 2000 Dodge Caravan

1 Answer

I have a 2003 bmw 530i blower is not working


I would first check the fuse for the blower. A common problem is either the blower resistor or the blower motor.The resistor is located behind the carpet trim that runs along the center console.You will need to remove the black trim cover under the glove box. reove the screw at the front of the carpet trim.Behind the trim toward the front of the a/c box you should see a trapazoid shaped connector. That is where the blower resistor is.

Apr 21, 2010 | 2001 BMW 325

1 Answer

2001 Dodge Grand Caravan heater blower motor not working at all...worker off and on during a cold spell....now not at all ....dealer suggested replacing blower motor and resister...cost $1000....due to the...


The Blower Motor Resistor is located behind the glove box on the dash. Remove the whole glove box to access. The Resistor is mounted against/sort of into the fire wall.
1. Disconnect the negative side of battery.
2. Disconnected the Electrical Connection to the Resistor.
3. Remove the bolts/screws. I believe they have 8mm heads, there should be 2 of them.
4. Replace with new one/Replug electrical connection.
5. Reconnect the negative side last.
6. Test System before putting the glove box back in!
The Blower Motor is easy (compared to $1000) to remove and replace.

Jan 01, 2010 | 2001 Dodge Grand Caravan

2 Answers

Blower motor location for 2000 Caravan


The motor is located just under the glove box on the passenger side. I remove the glove box then the panel below the glove box. I also go ahead and pull back the carpet and the padding under the motor. It is held in place by 3-4 bolts that take a 7-8 millimeter socket. I use a swivel extension for the back bolts. The motor with the fan blade attached is a tight fit, just keep wiggling and pulling it should come out. Try to remove the old moter without cracking the fan blade, because sometimes the replacement motor doesn't come with a blade

Sep 17, 2008 | 2000 Dodge Caravan

Not finding what you are looking for?
2001 Oldsmobile Aurora Logo

527 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8729 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...