Question about 1998 Dodge Caravan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Been working on my dad's 97 Caravan longer then i can remember for things you mentioned and have been not able to get him to sell it.
I found that the electrical connections are prone to corrosion and have replaced lots of the wire and pin connection in the wire harness, thank god i have time on my hands.
The instrument panel where the wire harness connects, i found that the solder goes bad and i had to re solder the connector on the back side of the circuit board, where the harness goes so you need to remove the instrument panel from the dash,
Here is a link that can help you retrieve DTC codes and do research on your caravan. I'ld tell you everything what i needed to do to keep my dad's caravan running but that would be a novel. http://www.allpar.com/fix/stall.html
Good luck and keep me posted, glad to help you keep yours running too.
Posted on May 26, 2009
If you're lucky, on the inside of the door, will be a triangular panel
right behind the mirror that you can pop off. If you're not as lucky
and it's one piece or the panel is blocked by the door panel, you'll
need to remove the door panel to change it.
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door
Posted on Oct 28, 2009
This Seems Indicative Of a Poor Connection AT The CLUSTER Or A Junction Connecter Close to the Cluster. This is Assuming you Have Ruled OUT ALL ABS COMPONENTS, LOOK at These VERY CLOSLY Because of the Small Volts These Wires Carry , the SMALLEST DEFECT WILL Cause this Type of Symptom that you have given. Please try all of the Above, I feel Confedint that athis is where your Problem Is.
Posted on Jul 16, 2010
Tips for a great answer:
Jun 23, 2017 | Dodge Cars & Trucks
Nov 23, 2015 | 2001 Dodge Grand Caravan
May 02, 2015 | 1997 Dodge Grand Caravan
Mar 27, 2011 | 1998 Dodge Caravan
Oct 17, 2010 | 1999 Dodge Caravan
Jul 16, 2010 | 2005 Dodge Caravan
Nov 07, 2009 | 1998 Dodge Caravan
Jul 06, 2009 | 1999 Dodge Caravan
May 27, 2009 | 2000 Dodge Caravan
Sep 10, 2008 | 1998 Dodge Caravan
1,121 people viewed this question
Usually answered in minutes!